Jump to content
SAU Community

Recommended Posts

  • 10 months later...

Good thread.

I just did a track day and spoke with my workshop afterwards, they recommended getting an oil temp gauge at a minimum.

So going by the suggestions in the earlier posts, if I was to get boost and oil temp gauges plus perhaps a shift light for the track, what brands should I be looking at? Autometer, HDI, anything else? Defis look nice but exxy.

Link to comment
https://www.sau.com.au/forums/topic/441108-gauges/page/2/#findComment-7474540
Share on other sites

Yeah but defis work good, are reliable and also record and can show max levels with programmable warnings, plus easy to read and look good, you get what you pay for, monitoring your engine is pretty important

Link to comment
https://www.sau.com.au/forums/topic/441108-gauges/page/2/#findComment-7474661
Share on other sites

Yeah but defis work good, are reliable and also record and can show max levels with programmable warnings, plus easy to read and look good, you get what you pay for, monitoring your engine is pretty important

Ok I take your point - just bought a set of 60mm boost/oil temp/water temp Defis at a reasonable price. These are not the latest model but seem to be in good nic.

I'll need to find an R34 triple gauge pod (the holder only) and a replacement Defi oil temp sensor somewhere, any recommendations on where to look?

Link to comment
https://www.sau.com.au/forums/topic/441108-gauges/page/2/#findComment-7475407
Share on other sites

do love the defi's too expensive for me though.

I got race tech gauges, does the job for street abuse.

they are the 60mm 3 in one gauges

1st gauge EGT, fuel pressure, Water temp (top of rad)

2nd gauge Oil press & temp and water temp (bottom of rad)

3rd AFR

EBC shows me boost.

you take your eyes of the road when on track, maybe at best you look down at the dash... rarely...

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/441108-gauges/page/2/#findComment-7475531
Share on other sites

do love the defi's too expensive for me though.

I got race tech gauges, does the job for street abuse.

they are the 60mm 3 in one gauges

1st gauge EGT, fuel pressure, Water temp (top of rad)

2nd gauge Oil press & temp and water temp (bottom of rad)

3rd AFR

EBC shows me boost.

you take your eyes of the road when on track, maybe at best you look down at the dash... rarely...

Cheers Daniel, looks like a great setup! I just found more details in your build thread: http://www.sau.com.au/forums/topic/452874-dannys-r34-gtt-build-diary-log/?p=7463887 . It sounds like installing the probes is a pretty big job?

I agree about not really being able to look at gauges out on the track, however there's always a bit of time during a cool-down lap :)

Link to comment
https://www.sau.com.au/forums/topic/441108-gauges/page/2/#findComment-7475548
Share on other sites

not sure what race's you've been to but the only cool down time is when your off the track completely, and yes installing the probes will be your biggest concern, once you get your head around all the fittings and npt vs bsb threads you'll nut it out quickly, also my local auto pro help's me with various fittings and adapters, so keep that in mind when something doesn't fit, and sometimes you'll just need someone to weld in a bung for your sensors.

Cheers.

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/441108-gauges/page/2/#findComment-7476076
Share on other sites

Check out the auber gauges. Super accurate and can be wired up to a beeper alarm. I've got them in my Cefiro and wired a switch into the alarm for when the car isn't running etc. Alarms are fully adjustable and if you want to change what the gauge is for down the track you just buy another sender and wire it up.

They are relatively cheap too (more now with the AUD going down) but I just bought 2 for my Patrol as well as they were $226 delivered. Brilliant after sales service too!

I've since added labels to each one but here is a summary:

  1. Oil temp
  2. Oil pressure (shown in Bar - car was off at time of photo)
  3. Water temp
  4. Warning buzzer - Each gauge has configurable warning levels switched by an internal relay. All 3 gauges are negatively switched to the buzzer so when the internal relay switches upon hitting the limit it will start the buzzer flashing and beeping
  5. Switch for buzzer - I added a switch to the buzzer so if something goes wrong and I'm aware of it, it doesn't continually keep beeping at me!
  6. Switch to allow radio, clock, central locking to work when the kill switch is off. When it is on it allows current to pass through a 15amp fuse across the kill switch terminals so if you try and start the car without the kill switch the fuse blows. When it is off it means the car is drawing no power.
  7. Kill switch

IMG_5708_zpsa1308e89.jpg

Edited by konect
  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/441108-gauges/page/2/#findComment-7476290
Share on other sites

Personally dont like the look of those data monitors, but to me that seems like a very well thought out and nice setup. The alarms in my gauges piss me off but they are either on or off. Would be great to have a buzzer cancel and alarm wired up to a 5psi oil pressure switch to cancel it when the cars off

If I had the money and room, I'd have so much crap in my car haha

Link to comment
https://www.sau.com.au/forums/topic/441108-gauges/page/2/#findComment-7477011
Share on other sites

Hehe. I used Auber Instruments' PID controller to replace the thermostat on my espresso machine. They make good stuff - just not as pretty as Defis. Auber "gauges" are not really gauges in the real sense of the word. They are little 1/32 DIN industrial indicators that you can set up to display the output from pretty much any automobile sensor (if you try hard enough).

Link to comment
https://www.sau.com.au/forums/topic/441108-gauges/page/2/#findComment-7477059
Share on other sites

Yeah had a play with the Defis tonight, just basic wiring to battery to see the powerup. The startup sequence is pretty nifty, it's a great piece of marketing on Defi's behalf, looks like every other gauge is doing the same these days :)

Link to comment
https://www.sau.com.au/forums/topic/441108-gauges/page/2/#findComment-7477111
Share on other sites

I actually went with digital gauges, mainly because in a scenario where you're wanting to see if something is boiling, all I want/need to do is see whether it's a 3 or 2 digit number. :P

That said, a buzzer would also suffice for this, and is a far better idea than quickly looking down near your head unit while driving at speed.

Link to comment
https://www.sau.com.au/forums/topic/441108-gauges/page/2/#findComment-7477184
Share on other sites

I also went digital but slightly different. I bought one of these when first released

http://www.rhdjapan.com/apexi-din-gauge-3-multi-purpose-digital-meter.html

You can set alarms and colours for different temps and pressures. It displays oil and water temp plus oil pressure. Comes with sensors and harnesses and fits perfectly into a normal din mount.

The good thing with the colours is that you can set it to blue for when the cars warming up and as it gets to normal operating temps it will slowly change to green. If the temps start to rise then it changes to pink and then red.

Has all the usual options like peak recall ect as well.

Here a short video of it

Link to comment
https://www.sau.com.au/forums/topic/441108-gauges/page/2/#findComment-7477208
Share on other sites

I'm keeping an eye on the zada tech 7" LCD as a replacement for my triple gauge cluster:

R34 mount replacing MFD/gauge pod:

http://zada-tech.com/blog/nissan-gtr-r34-7-mfd-gauges#.VL5x0u_c3Jg.twitter

Will also be keeping eyes on this, looks awesome but I don't imagine it will be cheap.

Link to comment
https://www.sau.com.au/forums/topic/441108-gauges/page/2/#findComment-7477389
Share on other sites

I'm keeping an eye on the zada tech 7" LCD as a replacement for my triple gauge cluster:

R34 mount replacing MFD/gauge pod:

http://zada-tech.com/blog/nissan-gtr-r34-7-mfd-gauges#.VL5x0u_c3Jg.twitter

Nice!! I like that. Now I just need to upgrade the 32 to a 34 [emoji16]

Link to comment
https://www.sau.com.au/forums/topic/441108-gauges/page/2/#findComment-7477665
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...