Jump to content
SAU Community

Recommended Posts

Hey all,

My tuner has recommended the Vipec Plug in Ecu model number VPNG.

I dont know much about these ecu's. What are peoples thoughts on these?

Will be running around 350 - 400kws on e85. rb25 r33.

these use the standard ecu casing?

Do they have any external read out capability? ie like the power fc?

I havent been able to get a price on these yet, but what are they roughly worth?

thanks

Link to comment
https://www.sau.com.au/forums/topic/442411-vipec-plug-in/
Share on other sites

Vipec are good, I have a Link which is near enough as makes no difference to the same thing. Better than the Power FC I had before

You can buy displays for them, but they are much larger then the PFC hand controller.

Price wise, best to shop around. To get the ECU plus any sensors etc and the expansion harness (which I recommend getting) you'll probably be between $1500-$2000. I'm not completely up to date with the Vipec, but I know they have added something to there new units which might include a bigger internal MAP sensor. Not 100% but, best to ask your local/nearest Vipec dealer anyway to give you a price on everything you will need

Yes it does use the standard ECU casing

Link to comment
https://www.sau.com.au/forums/topic/442411-vipec-plug-in/#findComment-7268168
Share on other sites

Yeah and the plus woth a vipec/link is that you can use an input for a temperature or pressure input to bring up a warning or make the ECU behave in a certain way.

I have my bare essiantial gauges and I dont even think about the stuff I used to have up on the power fc, and as others have said you wont have much time to look on the track and would be better off the information being sent to the ECU because it will react alot quicker anyway

Link to comment
https://www.sau.com.au/forums/topic/442411-vipec-plug-in/#findComment-7268494
Share on other sites

Ah ok damn.

Just being in a track car a few things in real time would be handy

Either of the Link displays should work with vipec - if your agent doesn't sell them get them direct from Link

http://www.linkecu.com/

or your nearest link dealer

Link to comment
https://www.sau.com.au/forums/topic/442411-vipec-plug-in/#findComment-7268577
Share on other sites

Seriously get a haltech, had a vipec plug in in my gtr had problems with it and there was no one around to help! ie tech support.

Who sold it to you? You can get support from Link factory by phone or email.

Link to comment
https://www.sau.com.au/forums/topic/442411-vipec-plug-in/#findComment-7268578
Share on other sites

Who sold it to you? You can get support from Link factory by phone or email.

Yeah I don't understand, I know Link have great support and their own Forum. Not sure about Vipec but nearly everything on the Link can be applied to the Vipec. They are basically the same ECU

I have never been happier then I am now with the Link, its been great so far

Link to comment
https://www.sau.com.au/forums/topic/442411-vipec-plug-in/#findComment-7268623
Share on other sites

Thanks guys.

Na my tuner doesn't sell anything really. Which I like as he doesn't push you into things because he sells it. Rather what he thinks is best for your application.

The link stuff looks great. Ill have a decent look at it today at work.

I liked the power fc for at the end of runs, drags etc you could see there and then the top speed, rpm, knock etc

Link to comment
https://www.sau.com.au/forums/topic/442411-vipec-plug-in/#findComment-7268656
Share on other sites

The difference lies mainly in the tuning software. I think the ECU's themselves are pretty much the same. The Vipec has a thing called mixture map which my tuner says is the best thing about the vipec compared to the link. This is only a tuning thing but, no effect on the way it behaves when driving

Link to comment
https://www.sau.com.au/forums/topic/442411-vipec-plug-in/#findComment-7268700
Share on other sites

Ah fair enough! Seeing as the tuner suggested Vipec im guessing hes most comfortable using it so wont go away from that then

Do the VIPEC plug n play ones im looking at, for later on, allow like a stack dash to be used etc?

Link to comment
https://www.sau.com.au/forums/topic/442411-vipec-plug-in/#findComment-7268726
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...