Jump to content
SAU Community

Recommended Posts

Hi everyone. Was wondering if you can get twin turbo manifold for rb 25 neo engine and if so where from. Was thinking about putting twins on my neo to run smaller turbos to get boost on earlier and be able to have cooler intake charge as a result. Thinking of twin 32 factory turbos running 12 psi each. Will this give me 12psi boost or 24 psi. Not fully undersanding how it works. Correct me if I'm wrong? Thanks

Link to comment
https://www.sau.com.au/forums/topic/444063-rb25-neo-twin-turbo-manifold/
Share on other sites

There is no reason to put twin turbos on an in-line engine shorter than 12 cylinders in the modern world.

So what you are saying is the OP needs a twin engine manifold? :P

Hi everyone. Was wondering if you can get twin turbo manifold for rb 25 neo engine and if so where from. Was thinking about putting twins on my neo to run smaller turbos to get boost on earlier and be able to have cooler intake charge as a result. Thinking of twin 32 factory turbos running 12 psi each. Will this give me 12psi boost or 24 psi. Not fully undersanding how it works. Correct me if I'm wrong? Thanks

12psi is 12 psi

doesnt matter if you had 135 turbos running 12 psi

its still 12 psi

  • Like 1

So what you are saying is I'm better off with a hi mount manifold exturnal gate and say a 3076 or 30 82. Want to have more down low and limit to 6500rpm gear change. Engine is in a lc torana that weighs in at 1000kgs and runs 336.1 diff gears. Current set up full boost is at 3800rpm. Want to bribg it down to around 28-3000rpm. With the exturnal gate I can keep the current 20psi boost and eliminate the current inturnal gate drop off back to 15 psi.

If you can buy the whole hot side off a later model rb26 cheap, then have at it.... shure why not? if you modify the stock manifolds everything else will bolt up nearly factory (a couple of minor mods for oil and water lines).

Or you could save yourself alot of time and money and get a hypergear highflow/stock replacmnent turbo.

The OP has full boost by 3800 rpm. This is equivalent to Hypergear OP6 highflow response. That (and 20 psi) is good for about 300 or more rwkW. If this turbo is not an HG OP6 highflow, then he would get more power with a one. If it is an HG highflow, then he would get more response with a 21U highflow (about 300 rpm) and a bit less power.

Or, he could consider speaking to Stao about a concept for an OP6 or 21U highflow that will allow 20ish psi of boost but come on strong with full boost by 3000rpm. ie, something that will trade 500 rpm of response for a bit less power. I'm sure Stao could find other buyers for a ~250rwkW RB25 turbo with very fast response. So far all his work has been towards retaining approximately the same response and moving the power upwards.

Looking for around 350kw@wheels. The hi mount manifold will help spool up and current turbo is an op6 hi flow with steel wheel from Stao. So it shouldn't be running out of puff I would think. Exhaust system is 3 inch from turbo to diff 100 cel cat and straight through muffler.

Yup, I'm with him ^. You're not going to get the power you're after AND the response you're after, even with twins. You already have close to the most responsive sort of turbo you can get and it would actually be pushing it to make it to your power target anyway.

Twins actually aren't that much of an advantage for response - most of it was marketing back in the 80s when the GTR and the Supras/Soarers were being readied for sale. Twins make sense on V engines to cut down on plumbing. They make the plumbing awful on in-line 6s.

If you do not mind a lot of work, a lot of nasty plumbing and a crowded engine bay, then what you really need to realise your goals is a twincharger setup. That would amount to a decent little supercharger blowing into the inlet of a turbo. The turbo needs to be special - a small compressor but a large turbine section. The two compressors multiply the boost you get. So if the blower is set to give 8 psi at its outlet and the turbo is inherently able to make about 8 psi, then the multiplying effect will give you about 20 psi after the turbo (instead of just adding 8 + 8 and getting 16). It is dead easy to make big arse boost, big arse power and near instant boost response this way. Well, easy except for the work and the plumbing.

Edited by GTSBoy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks for all the replies fellas. Gonna finish putting it back together and see how it handles the set up. If it starts pinging it’ll be parked.
    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
×
×
  • Create New...