Jump to content
SAU Community

Recommended Posts

Took the car for another drive today to rack up a few more Km's with the SAU crew, went up the Bells Line of Rd and down to Megalong Valley the car is feeling great!!!


cant wait for pic's to be posted either!!! and I'll update.

so all is good for the trackday tomorrow at SMSP South Circuit!!!

  • Like 2

well I've got a few things to do after its shake down at SMSP.

need to find this damn oil leak wasn't the sump, doesn't appear to be the turbo oil drain on the block so it's got to be a bit higher.

also need to re-bleed the brakes the pedal dropped a fraction.

on the drive home could hear a bit of a rattle in the arse end sounds like something needs tightening.

need to find out why the speedo stopped working after the g'box reinstall

also I had a bit of tyre rubbing but it wasn't on the outer lips of the rear guards so have to check that out too

and whilst I'm dropping the oil as I'm sure its cactus even though it still looks clean and smells alright, im going to setup my twin oil coolers that I never had time to fit.

hopefully I can make a setup looking something like this....... also going to remove the aircon condenser etc and see if it's worth making some better ducting for the air box.

and another thing to do is enclose the surge tank I'm thinking more of a Perspex shield from the back of where the back seat used to be to the roof so it's still easy excess if there's a problem just by opening the rear hatch/boot.

post-83704-0-29784000-1411546941_thumb.jpg

  • 2 weeks later...
  • 3 months later...

Well its been a long time since I done any updates but she's up and running again but still chasing down a oil leak I'm hoping its not a faulty second hand turbo!!!

I've fitted and plumbed up the oil coolers and duct's

removed the air con pump and fitted a smaller belt.

had to fit new headlights to clear the oil coolers,

relocated the battery to the passengers side back seat.

and fitted a bunch of gauges as well!!! Didn't like the look of the RE Amemiya carbon gauge cluster so I painted it in a plastic textured paint instead.

also replaced the turbo with a second hand one and fitted my 3" dump pipe.

post-83704-0-69062400-1420523161_thumb.jpg

post-83704-0-75980900-1420523250_thumb.jpg

post-83704-0-07088100-1420523256_thumb.jpg

post-83704-0-27046400-1420523263_thumb.jpg

post-83704-0-34280400-1420523271_thumb.jpg

post-83704-0-13216100-1420523284_thumb.jpg

post-83704-0-67710700-1420523290_thumb.jpg

post-83704-0-56436200-1420523307_thumb.jpg

post-83704-0-87143500-1420523314_thumb.jpg

post-83704-0-90087300-1420523321_thumb.jpg

post-83704-0-58264100-1420523326_thumb.jpg

post-83704-0-99876000-1420523332_thumb.jpg

with the oil coolers in place the pop ups don't fit anymore :( as you can see in the 2nd & 4th photo that the oil lines only just clear the headlights I've put in.

I don't really like the look of them either but they suit the need and once rego runs out I will be using them as the air ducts for the air box.

this car used to be white but it had a respray back in Japan, another reason why I was able to get it cheaper :) don't mind the yellow now but it wouldn't have been my first choice either. the yellow is actually a rare colour though!

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...