Jump to content
SAU Community

Recommended Posts

Took the car for another drive today to rack up a few more Km's with the SAU crew, went up the Bells Line of Rd and down to Megalong Valley the car is feeling great!!!


cant wait for pic's to be posted either!!! and I'll update.

so all is good for the trackday tomorrow at SMSP South Circuit!!!

  • Like 2

well I've got a few things to do after its shake down at SMSP.

need to find this damn oil leak wasn't the sump, doesn't appear to be the turbo oil drain on the block so it's got to be a bit higher.

also need to re-bleed the brakes the pedal dropped a fraction.

on the drive home could hear a bit of a rattle in the arse end sounds like something needs tightening.

need to find out why the speedo stopped working after the g'box reinstall

also I had a bit of tyre rubbing but it wasn't on the outer lips of the rear guards so have to check that out too

and whilst I'm dropping the oil as I'm sure its cactus even though it still looks clean and smells alright, im going to setup my twin oil coolers that I never had time to fit.

hopefully I can make a setup looking something like this....... also going to remove the aircon condenser etc and see if it's worth making some better ducting for the air box.

and another thing to do is enclose the surge tank I'm thinking more of a Perspex shield from the back of where the back seat used to be to the roof so it's still easy excess if there's a problem just by opening the rear hatch/boot.

post-83704-0-29784000-1411546941_thumb.jpg

  • 2 weeks later...
  • 3 months later...

Well its been a long time since I done any updates but she's up and running again but still chasing down a oil leak I'm hoping its not a faulty second hand turbo!!!

I've fitted and plumbed up the oil coolers and duct's

removed the air con pump and fitted a smaller belt.

had to fit new headlights to clear the oil coolers,

relocated the battery to the passengers side back seat.

and fitted a bunch of gauges as well!!! Didn't like the look of the RE Amemiya carbon gauge cluster so I painted it in a plastic textured paint instead.

also replaced the turbo with a second hand one and fitted my 3" dump pipe.

post-83704-0-69062400-1420523161_thumb.jpg

post-83704-0-75980900-1420523250_thumb.jpg

post-83704-0-07088100-1420523256_thumb.jpg

post-83704-0-27046400-1420523263_thumb.jpg

post-83704-0-34280400-1420523271_thumb.jpg

post-83704-0-13216100-1420523284_thumb.jpg

post-83704-0-67710700-1420523290_thumb.jpg

post-83704-0-56436200-1420523307_thumb.jpg

post-83704-0-87143500-1420523314_thumb.jpg

post-83704-0-90087300-1420523321_thumb.jpg

post-83704-0-58264100-1420523326_thumb.jpg

post-83704-0-99876000-1420523332_thumb.jpg

with the oil coolers in place the pop ups don't fit anymore :( as you can see in the 2nd & 4th photo that the oil lines only just clear the headlights I've put in.

I don't really like the look of them either but they suit the need and once rego runs out I will be using them as the air ducts for the air box.

this car used to be white but it had a respray back in Japan, another reason why I was able to get it cheaper :) don't mind the yellow now but it wouldn't have been my first choice either. the yellow is actually a rare colour though!

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...