Jump to content
SAU Community

Recommended Posts

Honestly with that much power in mind, just get a cross flow and a forward facing plenum.

It'll make life a lot nicer when it comes to working on the car and its a lot simpler (less joins, fewer points of failure)

I tell you know, if you're going to be getting 380rwkw out of a GTST, it's going to be FAR from legal and you'll have more than a few headaches with police. Effectively turning your car and $10,000 worth of mods into a garage queen.

Just get a crossflow and get Scotty_NM35 to fab you up a pipe which can bend around the bottom of the radiator and pop up into the engine bay... No holes needed.

A big high flow turbo + E85 + Blitz return flow + factory airbox would keep you under the radar.

In the end police will always be able to find an ECU or injectors or boost controller if they want to look for them, which means anything over 170rwkw has the potential to get you found out. It's all about hiding it as well as you can. If you can keep the engine bay looking stock they won't have reason to look much further. I'd argue that any forward facing plenum is grounds to scrutinise the engine bay, versus a cooler that uses the factory piping.

But some people say blitz return flow cooler won't handle 380rkws .can only handle 250rwks

Some people don't know

I'm doing 275 with mine on a conservative dyno and I don't think it's at its limits.

If you are in Vic, keep it all looking as stock as possible. You can still make the power using ethanol as a fuel instead of dino 98.

Either a good return flow or custom piping cross flow will do the job, no need for holes to be cut. ;)

How can cops find out what ecu or injectors u got???

also i have a blitz return flow for sale if your interested :)

If cops that moody, they'll tear your car apart.

don't they need a warrant or something for that? they not really allowed to pull out the interior trims are they?

Dunno what rock you've been living in, but cops are known to take kick panel out to see what ecu the car has and some cops know what colour injector caps of cars.

Welcome to Victoria.

Plus some cops doesn't even do that and decide to send you a EPA letter and let EPA do the work.

They carry portable tool kits

Screwdriver to pop open / destroy your kick panel and look for ECU

Injectors are pretty obvious if you know the engine and certain Knox people know the standard RB25 colour is dark red/maroon

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...