Jump to content
SAU Community

Recommended Posts

hey guys,

just getting a EOI out there for my GTR

$60,000
im in no rush to sell it as its been my pride and joy for the last few years but looking at buying a house so just seeing my options.

but i will let it go for the right price

if your interested drop me a line.

also check out my build thread you will notice a lot of work and time has gone into this car and not only a lot of money and parts, quality parts.

I never bought any ebay rubbish only ever used branded names.

I don't think you need a list as you can read my build thread ( build thread link located in my signature ) if you are really interested that way you can see everything that's gone on and saves us chatting when you could probably find the answer on there... although happy to answer any questions.

car right now has 388kw @ 20psi (e85) e flex tune also has a switch with a low boost setting aswell 314kw @ 14 psi (e85)

also make 320kw @ 20psi on 98

for the right buyer the car can come with a lot of extra parts and I even have some stock parts that I have kept also if the new owner wishes to put anything back to stock.

don't hesitate to call or txt 0409076032 or pm me here
I do shift work so if I don't answer straight away im probably at work or asleep :)

post-94184-0-03135200-1414645036_thumb.jpg

Edited by kaneryan
Link to comment
https://www.sau.com.au/forums/topic/450204-r34-gtr-eoi/
Share on other sites

Here is a list of what the car has,


If it has a price next to it then its what i have done to the car and purchesed myself so you can gauge an idea of the money spent


NOTE: I have not included all the time and effort and labour money which we all know is a fair bit.


$25720 is what i have spent on parts here, i have not included delivery costs in any of the prices either.


Most of my parts i purchased through RHD Japan or Import monster.




SUSPENSION AND BRAKES


DBA T3 4000 XS front and rear $900

QFM A1RM pads front and rear $250

HKS Coilovers




ENGINE


Gates timing belt $140

Tomei Cam Gears $250

Tomei type B Cams 260/9.15 $600

Tomei type A Valve Springs $300

ARP Head Studs $250

AUTECH Catchcan $200

ID 2000cc inj $700

Walbro 460Lph $200


HKS T51R KAI BB $5500

HKS Exhaust Manifold $5500

HKS GTII wastegate (60mm) $5500


K&N Pod filter $100

custom airbox cover $100




EXHAUST


Custom 4inch dump

Venom 3.5" cat 100cpi $350

HKS Super Turbo Muffler $1100




COOLING


Nismo Intercooler 100mm $1800

Greddy Hard pipe kit $600

Koyo radiator 53mm $600

Greddy oil cooler and relocation kit $900

Nismo Thermostat $80

N1 waterpump $150




ECU


Haltech Platnium Pro $2900

Haltech i/o expander $2900

Haltech wideband sensor $2900

Haltech 3 bar map sensor $2900




EXTERIOR


Z Tune Front bar / side skirts / rear pods $2100

Top secret diffuser $500

Nismo LED Tail lights $1200


TE37 TTA 19x10.5 +15 $3300





INTERIOR


Pioneer Double din Head unit $300

Focal speakers front and rear $350

Nismo gear stick




SPARE PARTS


Standard Intercooler

Standard Tail Lights

Standard cam gears

Standard camshafts

Standard Valve Springs

Standard Head studs

Standard Street Brake Pads

Rota Grid Wheels 18x10 +20

Link to comment
https://www.sau.com.au/forums/topic/450204-r34-gtr-eoi/#findComment-7417223
Share on other sites

You might want to reread your add. Those prices??

$5500 for a waste gate

$2900 for flex sensor

Nice car tho

That's the total price of the group of parts, shouldn't be written on each line but still makes sense.

Sweet car man. Should sell no worries.

Link to comment
https://www.sau.com.au/forums/topic/450204-r34-gtr-eoi/#findComment-7417760
Share on other sites

Nice car man love the colour interested where to buy a n1 water pump for $150 ? Pls pm me

hey mate, i bought a kit with a new timing belt and pulleys, and it was $150 to upgrade to a N1 water pump from the existing, so to that i guess it was alot more for a N1 water pump haha

Link to comment
https://www.sau.com.au/forums/topic/450204-r34-gtr-eoi/#findComment-7421832
Share on other sites

  • 3 weeks later...

just to clear it up, im not interested in trades, nor a car +$20k . just simply for sale. if you dont have offers more than 50K then i will probably not reply.
reasonable offers might be considered.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/450204-r34-gtr-eoi/#findComment-7432826
Share on other sites

so ive had a few offers of can I take some parts off the car and replace it with stock items and that will devalue the car that way it fits into my budget....
yes of course, im keen to have a win win situation with anyone aslong as its reasonable and isn't stupid. for example, ill keep my TE37's ($3000) and take the $3000 off the price of the car.
the only thing I will not be doing is doing payment plans.

also interested in a swap for a

S14/15

180sx

GTS-T

GT-T

but need to have at least 45k my way.

open to offers but if it is below 50k don't expect a speedy response.

Link to comment
https://www.sau.com.au/forums/topic/450204-r34-gtr-eoi/#findComment-7437485
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1780, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
    • Also, I logged some data from the ECU for each session (mostly oil pressures and various temps, but also speed, revs etc, can't believe I forgot accelerator position). The Ecutek data loads nicely to datazap, I got good data from sessions 2, 3 and 4: https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-2?log=0&data=7 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-3?log=0&data=6 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-4?log=0&data=6 Each session is cut into 3 files but loaded together, you can change between them in the top left. As the test sessions are mostly about the car, not me, I basically start by checking the oil pressure (good, or at least consistent all day). These have an electrically controlled oil pump which targets 25psi(!) at low load and 50 at high. I'm running a much thicker oil than recommended by nissan (they said 0w20, I'm running 10w40) so its a little higher. The main thing is that it doesn't drop too far, eg in the long left hand fish hook, or under brakes so I know I'm not getting oil surge. Good start. Then Oil and Coolant temp, plus intercooler and intake temps, like this: Keeping in mind ambient was about 5o at session 2, I'd say the oil temp is good. The coolant temp as OK but a big worry for hot days (it was getting to 110 back in Feb when it was 35o) so I need to keep addressing that. The water to air intercooler is working totally backwards where we get 5o air in the intake, squish/warm it in the turbos (unknown temp) then run it through the intercoolers which are say 65o max in this case, then the result is 20o air into the engine......the day was too atypical to draw a conclusion on that I think, in the united states of freedom they do a lot of upsizing the intercooler and heat exchanger cores to get those temps down but they were OK this time. The other interesting (but not concerning) part for me was the turbo speed vs boost graph: I circled an example from the main straight. With the tune boost peaks at around 18psi but it deliberately drops to about 14psi at redline because the turbos are tiny - they choke at high revs and just create more heat than power if you run them hard all the way. But you can also see the turbo speed at the same time; it raises from about 180,000rpm to 210,000rpm which the boost falls....imagine the turbine speed if they held 18psi to redline. The wastegates are electrically controlled so there is a heap of logic about boost target, actual boost, delta etc etc but it all seems to work well
×
×
  • Create New...