Jump to content
SAU Community

Recommended Posts

8 hours ago, ErinH said:

This is mine, had it for a little over a year now. Who'd have thought how much of a headache the older evos are! Gotta replace the gearbox in this one soon

Nice!

A mate of mine has a 6 and another a 10. The 10 sees a lot of track and all he ever does is fill up the tank, which makes (not so) secretly wish I had bought an Evo instead of a GTT. But I'm sure the grass is always greener...

6 hours ago, Hadouken said:

Correct.

I've got a breakdown of the difference between the 2 here

http://www.sau.com.au/forums/index.php?/topic/378971-The-Build-Of-The-Beast

I had a quick read. Looks interesting man. I saw you were looking to get the car tuned haha, noticed some misguided info on that thread on evo's having weak rods. this was only true on the evo 7 where it spits out a rod at 220awkw, That being said my evo 7 is at 250awkw with 470nm of torque stock turbo stock motor and still going strong :P Luck of the draw when it comes to 7s. 9s on the other hand, they go strong, well above 300awkw. 

A few guys i know run a bp71 turbo with e85 on stock evo 8s and 9s. A BP71 turbo + e85 gets you to 330awkw pretty easily and safely on a 8 or 9. Ported stock 9 turbo + e85 can get you close to 300awkw, with the added responsiveness of the mivec it will be killer. Low 11 second car. This is all on a stock long block, no forging. 

Ooo also forgot to mention the JDM 9 ecu supports flat foot shifting, launch control and anti-lag, so if you have the jdm 9 you might notice the antilag setup on the exhaust manifold :P 

Edited by Deza3000

A bloke I work with has an evo x. Was pushing close to 300 awkw on e85 on standard setup. It ended up throwing a rod. So, even the 4B11 does have rod issues at high torque/hp. In saying all that, he used to drive it like it was stolen. To wrap this up, evo's are bloody amazing but just like everything there is some limits that need to be worked around. I have heard of guys limiting torque to reduce the strain on the rods.

  • Like 1

Oh yea i agree, depending on how you drive it and the life its had it will make it weaker. Was your mates evo X a DSG? If so id assume those rapid shifts might incur some torque load on the motor considering the car is never off boost. The way the turbo comes on boost and the how wild the tune is can also determine the longevity of the motor, hence why bp71 is a popular choice (as well as fp's). That being said, lots of R&D has gone into making 300awkw reliable on stock block evos. Lots of forums in uk and us on people running 400+whp on their evos, some even running 500whp - though this is surley going to reduce engine life. 

http://www.evolutionm.net/forums/evo-engine-turbo-drivetrain/391588-hp-estimate-what-will-stock-9-block-hold-safely.html

But yea you're right, it might be all in the tune, as you said limiting torque to prevent rod failure. 

  • 4 months later...
  • 1 year later...
  • 6 months later...
  • 2 years later...
  • 1 year later...
On 22/04/2022 at 10:49 PM, niZmO_Man said:

Don't drive it too much, will be $100k soon

Lol.

Needs paint.

Tried selling recently, kept getting offers for 25k 

Had 35k as price.

Similar with good paint were 45k.

Paint is approx 10k.

So, I figured, 45-10=35.

Apparently not.

People kept saying 35-10 for paint, so 25.

We will see what happens down the track.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...