Jump to content
SAU Community

Recommended Posts

Thanks guys for all the feedback overnight and PM's.

The reason for not going for 12 trigger points is some ECU's cannot keep up with the count, Yes I know with less if the count is lost it takes longer to regain the position however with only 6 points their is alot less chance of losing the count as the ecu can keep up.

Link G4 keeps up with 32

pretty impressive and informative - ta

Would be interested for RB26.

Having not looked into or thought about this, prior to this thread, is there any aftermarket kits available/recommended?

I'd like to support "murrayis" if made available for the RB26.

pretty impressive and informative - ta

Would be interested for RB26.

Having not looked into or thought about this, prior to this thread, is there any aftermarket kits available/recommended?

I'd like to support "murrayis" if made available for the RB26.

Ross do a crank trigger kit for RBs,

Includes balancer, sensor and trigger wheel..

Just need an available input for the ecu

I've got one, just need to make sure the sensor is positioned correctly

Thanks Joey

I'm sure I have read where a few peeps have gone the Ross Blancer and trigger and had issues.

Not blaming Ross as it maybe how it's set up. (throwing belts?)

Could be totally off the mark too :/

Yea Once I have everything sorted I'll do up a group buy. I've secured some machining prices from China... yes I know but it comes down to cost and have ordered some samples to check quality.

I've just started machining my set because I am impatient and it doesn't cost me anything :)

About 10 minutes in with close to 2 hours to go:

post-23119-0-35369200-1419899625_thumb.jpg

More progress pics to come.

pretty impressive and informative - ta

Would be interested for RB26.

Having not looked into or thought about this, prior to this thread, is there any aftermarket kits available/recommended?

I'd like to support "murrayis" if made available for the RB26.

theres a few around, one kit in qld(ONO 747 vl runs one)pics on this forum somewhere, one in vic(sticks sell them) and one in s.a just finished,

(pro gtr motorsport) plus ross,theres probally , no doubt theres others i don't know about

cheers

darren

Edited by jet_r31

The idea around my items is to be affordable for the DIY'er who can work around mounting them him/her self. The kit should work fine on all the dual cam RB series - As I only have a rb20 and a rb25 to test on this will confirm but I don't see many potential issues as they all use the same oil pump and cam gear sizes.

Thanks Joey

I'm sure I have read where a few peeps have gone the Ross Blancer and trigger and had issues.

Not blaming Ross as it maybe how it's set up. (throwing belts?)

Could be totally off the mark too :/

Yep I've heard of people throwing belts, I was making over 420rwkw and I only threw a belt once in over 10,000km of driving. Maybe installation issues? Not sure

Looks really good.

Ross one seems so expensive and ive never had an issue so never really considered it. This looks like it has a lot of potential. I could probably get the ross trigger wheel seen as I already have the balancer

Must be nice having that gear at your disposal. Id love to be able to make a CAD drawing and then just make it happen lol

It is great having toys to mess with to make little things that you can;t just buy. I converted my Mill to cnc over the past year and these are really the only full thing I have completed so far for a purpose.

Finally finished the Cam bracket just a little time ago. Didn't run through the finishing passes as these are just for me so the finish is rough :)

post-23119-0-98593900-1419921796_thumb.jpg post-23119-0-36655000-1419921799_thumb.jpg

I have the ross 32-2 teeth setup with the standard CAS for phasing

There are plenty of kits floating around the world ATM, but it is always good to see someone else's approach to this issue

You just use the input that would normally read the crank angle output from the factory CAS, it just has to be programable

I have thrown 3 Gates belts so far the last of which lasted less then 2 hours, fitted it drove to dyno then it couldn't take the power and decided to spread it self around the engine bay, I then had to drive the bastard home with no PS on 275/35/19 front tyres :(

Funny thing is I stopped at Autopro on my way home from work to get another belt or three but they only had there own elcheapo belt in that size and I needed to turn the car around so I grabbed it got home fitted it then went and got three Gates belts, well one full trackday and a spirited drive up putty and back plus a few thousand Ks later the elcheapo belt is still on there in perfect nick :/

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Just wanted to pop in an update on my setup. The CD swap has been great, I love the mazworks housing for the overall simplicity. I ended up sealing my trans tunnel with a thin sheet of aluminum reused some of the holes on the trans tunnel, and laid some window sealing EPS foam around the edges. Works great, really quieted things down and sealed up the car.  As for the power comment. Right now I am also running about 650whp. with the way the bell housing is attached to the face of the transmission I have zero doubts it would be fine, mainly because the input shaft and main shaft bearings are seated into the bell housing adapter. This means the load is NOT on the bolts to maintain the power, rather into he casing of the bell housing; Yes the bolts are doing some work there, but with both shafts locked in zero worries.  End of the day, the Mazworks solution is the easiest and safest. no need to take your trans to a shop to get milled perfectly, it fits with minimal clearancing, and you can use all your existing clutch and flywheel.  Driving wise the CD has been great compared to the big box, I'll probably swap my final drive at some point. The serial 9 shifter is gooooood, my only qualm is how tight it is, it takes a fair bit to get use to, 5th and 6th are a bit eh/hard to find at times, but maybe I need re-adjusting, and I think my clutch master is very tired and needs a rebuild. 
    • If you are keen, have a look at my build thread. Car is for sale for the right money or straight swap for a F80 M3 LCI.
    • Welcome mate.  No point in over thinking it, buying any one of those cars you mentioned is not a smart or logical choice with the availability of many "better" (re price to performance) cars available to you.  The heart wants what the heart wants, buy whatever it leads you too.
    • Hey everyone! Im so grateful to be apart of this community and ill do my best to be apart of this. Firstly, i'm not disclosing my real name due to in real life circumstances surrounding my privacy and public image (sorry lol) Secondly, The only thing personal I am willing to share is that I'm from Sydney and a descendant of one of Sydneys largest mortgage firms. I got gifted my first ever car, a 2022 Porsche Cayenne and I love it to death. Ive been driving it for about 5 or 6 months now and honestly Im so grateful for my parents for gifting me this vehicle. However recently I've been working my ass off to afford my second car (which I need help deciding soooooo community help me out please?). Once decided, im planning to try modify it myself. Recent I've been thinking about getting a Skyline, particularly a 25GT or GT-V, yes I know overrated as hell, but I'm also considering a Chaser which I recently came to love. However my dream is to one day own a 180SX (So hard to find clean versions and im not really into importing).  Lastly before I send this off, I want to apologize if I sound tacky or pretentious. I try not to and want to genuinely learn from everyone and anyone. (Im no expert in this area) Thanks for reading!
    • I've got three stashed away but it's starting to get silly with the prices 
×
×
  • Create New...