Jump to content
SAU Community

Recommended Posts

also selling my kit as i didn't want to remove my ross balancer.

Cameron have you finished with this project or are going to try and design another kit?
has anyone thought about using factory cas for start position then something off the crank or flywheel>

Hi Robert,

At this stage I am done with the kit however if anyone is wanting custom changes etc. I am happy to work with them to produce one offs etc.

I do not at this time have room for different blocks and rotating assemblies to work on different designs.

  • 5 weeks later...
  • 4 weeks later...

Long time, no reply and I'm sure this will likely only help a few people but here is what I did to solve the tomei oil pump interference and smaller diameter fluidampr issue. Modified Murrayis's mount, rotated the mount, added a cylindrical spacer, tapped the actual sensor and I'll be cutting notches in my crank balancer. I'm going to go with (12x) .300" wide x .300" long and about .100" deep. The sensor is based on changes in magnetic field and should still pick them up even though the notches won't be totally through. Range on the sensor is .018-.080" inch. My .100" or so shouldn't affect it. I don't want to have a belt have the chance of getting freyed on notches.

post-136202-0-40708300-1454289032_thumb.jpg

post-136202-0-55908800-1454289058_thumb.jpg

post-136202-0-64283800-1454289078_thumb.jpg

post-136202-0-43377300-1454289098_thumb.jpg

post-136202-0-37808500-1454289122_thumb.jpg

post-136202-0-81909900-1454289141_thumb.jpg

post-136202-0-48400800-1454289162_thumb.jpg

post-136202-0-48883900-1454289178_thumb.jpg

LOL...exactly. Trust me I felt bad grinding and chopping on such a nicely machined part, but hey it's working and feels totally solid. And I left my spacer short so I can shim under it and move the sensor closer to the crank pulley if needed after I really torque it on the crank.

  • 7 months later...

Hey guys just got my car tuned at horsepower solutions and wanted to share my results from this trigger kit. Brief description is its a r32 with fully built 2630 running a forced performance super 94 with all supporting mods. I used a ross balancer and trigger wheel with murrayis kit. Worked a treat with only thing to do is space it apart with shims. Below are some pics

20160522_113751.thumb.jpg.a82e467049f4d5167ec05871193ad2d4.jpg

20160516_193243.thumb.jpg.cb332520835c5625b6f532176fd62f62.jpg

20160424_104640.thumb.jpg.3a0aad1a0e744f964b1bc0477f75c68c.jpg

20160412_164559.thumb.jpg.f75bc517bac3dcc7434bb7c102cb1b86.jpg

20160831_173822.thumb.jpg.d2134200586f1558bde942c19b4d3039.jpg

20160522_113751.jpg

20160516_193243.jpg

20160424_104640.jpg

20160412_164559.jpg

20160831_173822.jpg

On 04/12/2015 at 9:36 PM, BlackBox said:

Hmm I really want to come up with a solution that doesn't require a gaping hole in the cover...

You can always just change to a custom made single window disc for the existing CAS instead of the the Murrayis cam trigger, that's what I'm doing.

 

You can always just change to a custom made single window disc for the existing CAS instead of the the Murrayis cam trigger, that's what I'm doing.

 



I've already got the kit and got my balancer machined and re-balanced.. I am going to get a timing cover 3d printed to suit what I need

The last one I got was about $80, but that was for a CA18. Autronic sell them so do NZ efi. Just don't connect the REF to the ECU and use the Sync off the exhaust cam.

http://www.nzefi.com/product/24-tooth-cam-angle-sensor-disk-nissan-sr20det-rwd/

 

Maybe Matt could write different code for the CAS.  The Nissan one is providing 360 degree slots plus the 5 or 6 on the other circle.  The code might be easily enough altered to expect an arbitrary number of pulses on either of those.  Or maybe it would be a horrible exercise.  I'm not too au fait with decompiling the code out of (anything really) these ECUs.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • HPA do an interesting video on tuning, and Adrian shows on the dyno, moving from 10:1 to 12:1 (And I think even 13:1) and the power moves SFA. However, a couple of degrees of timing has a HUGE impact. Exhaust side of things will more be the length of the exhaust and how many bends and turns you have. The straighter you can keep it, the better. By a lot. Oh, and getting the diameter right. Bigger isn't always better. Going to big can actually lose you power.
    • I have to say, most people I see on the road fit the bill of atrocious drivers. Whether they be cowboys in their dual cabs, bogans in the Commodores, or the soccer mums. Pretty much most people on the road put zero freaking thought into driving. Barely look further up the road then the end of their bonnet, and have never even thought about how catastrophically wrong shit can go, by doing what they all deem as normal driving. Especially their late braking, racing to stopped lights, and sitting half a foot off the bumper of the car in front at 110km/h. Wanna know what's even better? By the time their kids get to be old enough to learn to drive, they've already got in the back of their brain what is normal driving, how annoyed you're allowed to get at people etc, and then their parents who actually have zero freaking skill at driving (Even though they constantly say "I've been driving for 20 years and never had an accident!") teach the little twerps how to drive, or should I say, how to make a car move. Literally watched a parent teach their L Plater, on a 4 lane freeway, that you just slam the brakes on, and push your way over, even with a B Double bearing down on you, and that's how you should drive, rather then, just keep going to the next exit. Same shit happens all the time for side streets etc, watching numpties pull dumb shit turns pushing across 3 lanes of traffic, rather than just go up the road another 30 seconds, and take the next turn that'll get you to the same location... Oh, and the damn right lane bandits. Or the retards driving along with their headphones in, and can't hear the ambulance or fire truck right up their ass about to run them over...   Pretty much, people drive on the road, like ego centric f**ks, and don't actually think how dumb shit their driving is, how it could easily kill them or someone else in a split second, or at the very least, how they're driving is contributing to all the shit they're bitching about on the road, like shitty congestion!
    • Yeap, not as doorty as ITB's, but alot more doorty than before, induction sound great when I'm up it 馃
    • Any difference in induction noise?
    • I think you know exactly who I mean.
  • Create New...