Jump to content
SAU Community

Recommended Posts

Neil my fabricator did the conversion for me he spent quite sometime looking for the correct bits from the wrecking yard ect. The pic and the info i posted gives you a starting point for the bits to look for but if you wanted him to do a conversion for you just need to send him the GTR parts and he will send you back the bits fabricated ready for install. Last person that asked he said $400. Sorry i couldn't be more help. If you want his details let me know. cheers

  • 2 weeks later...

Engines in progressing slowly but surely.

post-20010-0-62134900-1432285683_thumb.jpg

post-20010-0-45130700-1432285775_thumb.jpg

Completed wheel with terminated bulk head connector.

post-20010-0-95973300-1432285799_thumb.jpg

Speedflow bill this week :spank:

To avoid any problems associated with ethanol sitting in the fuel system for long periods we rigged up a fuel drain. The process will be drain the main tank add 98octane unleaded then connect into this quick disconnect fitting, rotate tap into off position which blocks return line feeding the tank then crank engine to purge remaining fuel in the lines and rail nice and easy.

post-20010-0-99934000-1432285907_thumb.jpg

Fingers crossed some bigger updates coming next week.

  • Like 2

What coils are you using ?

I'm looking at an upgrade at the moment and will most likely just go the LS2 route, I just noticed you have gone something else

Mick I'm running Honda Cbr bike coils with a CDI module powering them. Since buying the equipment i've heard some mixed opinions on the reliability of these coils so ill play it and see how they go. Being a complete OEM system with built in ignitors i think the LS2 route would be a pretty good option.

  • 4 months later...
  • 1 month later...

updates?

Yep updates coming finally got some spare time on my hands to start getting it ready for tuning... January is the target real keen to get it out for some roll racing at willowbank... Hopefully the smaller brakes to suit the 15" rims pull it up going into turn 1 >_<

Yep updates coming finally got some spare time on my hands to start getting it ready for tuning... January is the target real keen to get it out for some roll racing at willowbank... Hopefully the smaller brakes to suit the 15" rims pull it up going into turn 1 >_<

Just pull the 'chute... ;)

Found some second hand SSR's rims which we refurbished after making them fit. Took plenty of messing around though had to push the rim further into the guard by spacing the rim inwards by the way of 14" x 8mm ring that bolts between wheel center and rim. The 275/60 is 28" tall so placement needed to be spot on.

Just back from powdered coating today should look ok. :wub:

SP1's 15"x 9"

post-20010-0-26748800-1448542613_thumb.jpg

post-20010-0-03801700-1448543620_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...