Jump to content
SAU Community

Recommended Posts

Neil my fabricator did the conversion for me he spent quite sometime looking for the correct bits from the wrecking yard ect. The pic and the info i posted gives you a starting point for the bits to look for but if you wanted him to do a conversion for you just need to send him the GTR parts and he will send you back the bits fabricated ready for install. Last person that asked he said $400. Sorry i couldn't be more help. If you want his details let me know. cheers

  • 2 weeks later...

Engines in progressing slowly but surely.

post-20010-0-62134900-1432285683_thumb.jpg

post-20010-0-45130700-1432285775_thumb.jpg

Completed wheel with terminated bulk head connector.

post-20010-0-95973300-1432285799_thumb.jpg

Speedflow bill this week :spank:

To avoid any problems associated with ethanol sitting in the fuel system for long periods we rigged up a fuel drain. The process will be drain the main tank add 98octane unleaded then connect into this quick disconnect fitting, rotate tap into off position which blocks return line feeding the tank then crank engine to purge remaining fuel in the lines and rail nice and easy.

post-20010-0-99934000-1432285907_thumb.jpg

Fingers crossed some bigger updates coming next week.

  • Like 2

What coils are you using ?

I'm looking at an upgrade at the moment and will most likely just go the LS2 route, I just noticed you have gone something else

Mick I'm running Honda Cbr bike coils with a CDI module powering them. Since buying the equipment i've heard some mixed opinions on the reliability of these coils so ill play it and see how they go. Being a complete OEM system with built in ignitors i think the LS2 route would be a pretty good option.

  • 4 months later...
  • 1 month later...

updates?

Yep updates coming finally got some spare time on my hands to start getting it ready for tuning... January is the target real keen to get it out for some roll racing at willowbank... Hopefully the smaller brakes to suit the 15" rims pull it up going into turn 1 >_<

Yep updates coming finally got some spare time on my hands to start getting it ready for tuning... January is the target real keen to get it out for some roll racing at willowbank... Hopefully the smaller brakes to suit the 15" rims pull it up going into turn 1 >_<

Just pull the 'chute... ;)

Found some second hand SSR's rims which we refurbished after making them fit. Took plenty of messing around though had to push the rim further into the guard by spacing the rim inwards by the way of 14" x 8mm ring that bolts between wheel center and rim. The 275/60 is 28" tall so placement needed to be spot on.

Just back from powdered coating today should look ok. :wub:

SP1's 15"x 9"

post-20010-0-26748800-1448542613_thumb.jpg

post-20010-0-03801700-1448543620_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
    • Sounds good, we will aim to be there! @The Bogan I'll give you a shout if you are heading up to campbelltown for the meet too.
    • Before I get to the test day, just to finish off the android head unit. This is a demo from car start up....the standard/host system takes a few seconds to boot (same as all v37) but Android comes up quickly. In this vid I'm using the delivered launcher but have set the default to Agami since which is easier to navigate when if use primarily 5 apps. You can see the host system still takes over when required eg putting it in reverse, and you can switch between Android and not by holding the back button 3 sec. It is pretty responsive (fast) but you can see I had to press harder than expected a couple of times.  I still have the phone connected to the stock system, and that also seamlessly takes over Android music playing. v37-android-demo.mp4 The bigger reason that I put this in though is so that I can use Ecutek directly on the head unit. That gives me a dash with logging (up to 20MB only), high and low value warnings on any parameter etc etc. I've run a USB cable from the Ecutek OBD dongle to a USB input on the unit, easy. v37-ecutek-demo.mp4   The unit did freeze on the launcher the other day, I think Agami was trying to verify the license when it didn't have a data connection...will monitor and report back if there are any other problems but so far I'm very happy with the upgrade.
    • Nah that is just crappy GPS mapping, I did have a small excursion (cold tyres, damp track, surprise!), will post up that when I get a chance.
×
×
  • Create New...