Jump to content
SAU Community

Recommended Posts

Thanks for the interest guys...We always like having clubs come for tours as some really nice cars seem to fill our carpark. We will have a couple of photographers attending to shoot the meet so we should get some cool shots from it.

in terms of the talks itself. We are happy to be guided by you on this. One thing i have asked the guys to talk about is oil issues with Straight 6 motors, sometimes spending 2K on a Nismo pump isnt going to solve the issue like you thought it would. We are also going to do some work on E85 oils. This is a big issue right now as some of the biggest oil companies in the world dont have an E85 oil.

what else do you want to hear about? the talks go for about an hour, Then we have dinner and do a tour of the facility. We will also be handing out some sample products so let me know which oils you would prefer so it makes our job a bit easier.

See you all next week.

Thanks Dawzey!

The question I would like answered is:

what oil temps does Nulon like to see their oils run at. So minimum temp, maximum temp and the ideal temp to be running at. Also what effects does it have on the oil if you are running the temps to hot or cold?

Perfect question... i could answer it now, but where is the fun in that.

Another question i have is, How many of you are running E85?

I am and I know a fair few others who do as well. Very interested to talk about E85 oils

Hi Guys...

We would like to postpone this event for one week if possible and run it on Wednesday the 18th if it is OK with you guys? (One week delay).

This will allow us to add a few members that would be missing out on this event due to the timing, if this is a problem feel free to PM me and discuss and ill see what we can do. This will also help Nulon prepare and provide a better event for us all.

Can you please confirm that Wednesday the 18th is OK asap.

I am aware this is very short notice and hope it works out for all...

Cheers,

Mat




  • Similar Content

  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...