Jump to content
SAU Community

Recommended Posts

Hey all,

The Mrs has decided to come over to the dark side and nab herself a M35 Stagea as her next car. I was wanting the opinions of people in the know, more than I, what the best model of the M35 is. On a quick search I see there is around 6 or so sub-variants of the car, and as I've never owned a M35, I'd not have a clue which one was better than the other.

The car will ultimately be a kiddy wagon, however, that by no means, means it has to be boring ;)

Anyways, let the opinions begin!

Cheers,

- Lance

Link to comment
https://www.sau.com.au/forums/topic/452941-picking-the-right-m35/
Share on other sites

Depends how much you want to spend. New regulations make it difficult to comply 250s so all newer ones tend to be 350s which have the same power as the 250 turbos. For example TradeMe auction 83300352 a 350 with 67K for $11k

250s are to be had from $5k but it may pay to look for one that has had the $2k cam chain replacement job done!

The pm35 (series 2) is probably the better every day car. The nm35 2.5t model is the better performance option.

Other then that it is more a staying difference between those sub models then an actual model difference. Even some low grade cars with stock outside can have everything the higher models had if the owner ticked the boxes

Cool, thanks for the input so far guys. To a point, money isn't a problem so I'm not too worried there. Okay, well if the 3.5's have the same power output then I'll probably go off the hunt for a 25T as it'll have more potential for issues which is not what I want for this car. Besides, that's what the C34 is for lol.

- Lance

Depends how much you want to spend. New regulations make it difficult to comply 250s so all newer ones tend to be 350s which have the same power as the 250 turbos. For example TradeMe auction 83300352 a 350 with 67K for $11k

250s are to be had from $5k but it may pay to look for one that has had the $2k cam chain replacement job done!

Interesting about the cam chain replacement. When does it need doing? I ask this because my original RMR30 did 600ks and was never replaced.

If I was buying again I'd go for a PM35 (RWD) due to the greater crossover of parts with G35s and 350Zs. Having said that the only thing that even slightly worries me about my PNM35 is around-town fuel consumption, and now prices are down even that's not such a hassle.

They're fantastic family wagons and I have yet to run out of space when taking the family away, I normally find myself looking for more things to put in the boot to stop everything bouncing around.

Interesting about the cam chain replacement. When does it need doing? I ask this because my original RMR30 did 600ks and was never replaced.

It doesn't, unless it has never been serviced, or the K's are stupidly wound back.

Have owned both a 250t RS Four and (currently) a 350RX Four.

Go the 3.5. Interior (everything) is much nicer. Exterior is nicer. Transmission is nicer. AWD system is easier (no need to worry about external pumps). Engine is common although the 2.5t is much better for cheap performance.

3.5 is a better drive in factory spec. if you are modding, anything up to 6-7k will see significant performance increases with the 2.5t and okay increases with the 3.5.

If you are spending big for performance ($15k+), you will get more out the 3.5 but it will require stronger internals.

Neither have to be "boring" (brakes, suspension and bracing perk up the drive quite a bit) and both make an excellent kiddy wagon.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...