Jump to content
SAU Community

Recommended Posts

Hi,

I'm upgrading my trans cooler and I'm wondering if r34's have a thermostat on them already so I can just take the hoses off the stock one and put them on the new one. If it doesn't have one what would you guys recommend for one ? Preferably something not too pricey..

Also is the plumbing for the trans cooler just 1 line from the box to the cooler then 1 line back or is it connected to anything else ?

Any help would be greatly appreciated ! :)

Link to comment
https://www.sau.com.au/forums/topic/455375-r34-gtt-auto-trans-thermostat-help/
Share on other sites

No thermostat stock, generally you need to leave the fluid going through the radiator on a road car.

I run a $30 inline transmission thermostat off ebay, the blue ones. You will likely see them if you look through. They are 10mm fittings so you may need to muck around with the 8mm lines to get it to fit.

A trans cooler can never be too large, and it needs to be after the radiator outlet and thermostat. You will need to work out which line is pumping out and which is the return without making a massive mess preferably. :P

R34s have a small external trans cooler. I would expect that there's no thermostat involved because it's not very large. You could probably double or triple its size on a car being worked hard without too much problem, unless you end up driving it around gently in cold weather.

The question of whether you actually CAN run a thermostat in that line is another problem. I don't know if the cooler line runs the total flow of some circuit or if it's just a bypass. If it's not a bypass in it's own right, then a thermostat in that line would need to have a bypass in it to return flow when closed.

Hi,

I'm upgrading my trans cooler and I'm wondering if r34's have a thermostat on them already so I can just take the hoses off the stock one and put them on the new one. If it doesn't have one what would you guys recommend for one ? Preferably something not too pricey..

Also is the plumbing for the trans cooler just 1 line from the box to the cooler then 1 line back or is it connected to anything else ?

Any help would be greatly appreciated !

Something else - normally the radiator . This helps to bring the auto up to temp quickly from a cold start. I would guess temps are normally high where you live so a thermostat may not be necessary. If you are keen you could install a temp gauge for a while and see what you get.

No need for an inline thermostat with autos unless you live where it is really cold

If you do fit one make sure it has a bypass until it warms up otherwise you'll starve the rear planetry of oil and damage it

Fitted my stand alone davies craig 679 and driven it with no problems in 6-10deg weather every morning. It is placed behind the grill and takes roughly 10min for the trans to go into lockup if driving like a normal person on 60-80k roads. When the weather starts to get colder if I notice any adverse affecs I will add a plate that can sit over it and shield it from air. It got rid of all flairing inbetween gears and shifts better than before. (Could just be masking another problem)

Thanks for all the help and suggestions guys. But as this is a daily and gets used in mornings when it's fairly cold I'd like to be able to get it to temperature quicker and I'm not a big fan of cooler covers. Also since I'm doing a shift kit, trans temp gauge and trans cooler I'd like to do it properly and add the thermostat while everything's pulled off.

I'm slightly confused with the plumbing of the stock cooler but. Is it not just a straight line from the tranny to the cooler then a line straight back to the tranny ? Or does it connect to the Intercooler as well somewhere along the line ?

Ah that's what I wasn't sure about. Cheers for that guys. Also cheapest I can find an external thermal bypass is like $50+. Is there any thermostat from Supercheap or something I could use ? If so what one would you recommend and does anyone know what's the minimum temperature for safe performance and for the thermostat to open up ?

Cheers

Cheers for that

Also reading the description the Inputs and outputs seem a little small in diamiter. Won't that restrict flow?

And while I'm here I'm looking to install an oil temp gauge and I need a housing for the temperature sensor. Would you happen to know where to get one ?

The hosing for the Davies Craig kit I bought looks pretty wide so I just wasn't sure. And good idea with the bung on the sump but I'd like to do that as a last resort

3/8 is loose on the 679. They are thick lines, that's all.

I believe Scotty was talking about a temp gauge in the last auto thread, using a sensor adaptor for the 3/8 lines.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...