Jump to content
SAU Community

Recommended Posts

Agreed, united have done it correctly. By sponsoring the V8 supercars they've identified their market and really put it in their minds. And also having the same fuel the supercars run on available at the pump adds the extra wank factor.

And now that Caltex are pulling out they have the whole market, and they're gauging it like there's no tomorrow, so I reckon they'll be around for a while

whos gives a shit, i'll pay whatever E85 costs, I aint goin back to shit 98 ever.... just get a cheap daily and on weekends squirt the RB and love it!!!!!!! :woot: don't feed ya RB less than E85 its cruel..lol...

Edited by AngryRB
  • Like 1

What are 205 drums worth?

Never looked into it.

But, thought about drums as opposed to pump due to pump being 30mins each way.

I believe it is somewhere between 500-600 bucks for a 40gal drum of Sucrogen E85

You cannot legally keep any more than a 20 Litre drum in your suburban house and Shed , unless the law in this regard has changed, Out on Acreage might be a different story depending on the Land classification , 60 Litre Drum might be all you can store. IF you have 205 Litre then the entire scene changes this might even need to be in a Bund walled enclosure quite possibly with water readily available. Some of the semi urban areas can be tricky.

  • Like 1

Total in Suburbia is 20 Lit for Mower's and so on , BUT as I said these laws have possibly changed but there are restrictions for volumes based on fire risk.
The hoops I had to jump through to be allowed to Spray Paint at my place, Airbrush graphics with some base background , thinner's and Paint fumes etc.

  • Like 1

You cannot legally keep any more than a 20 Litre drum in your suburban house and Shed , unless the law in this regard has changed, Out on Acreage might be a different story depending on the Land classification , 60 Litre Drum might be all you can store. IF you have 205 Litre then the entire scene changes this might even need to be in a Bund walled enclosure quite possibly with water readily available. Some of the semi urban areas can be tricky.

bummer.

Might be able to keep it at work? (mechanic workshop)

Total in Suburbia is 20 Lit for Mower's and so on , BUT as I said these laws have possibly changed but there are restrictions for volumes based on fire risk.

The hoops I had to jump through to be allowed to Spray Paint at my place, Airbrush graphics with some base background , thinner's and Paint fumes etc.

I wonder how pleading ignorance would go?

Might need a fireproof cabinet and bunting.

well I guess if it's air tight and it's filled to the brim then it should be fine,


Definately not, NEVER fill a 205 Lit drum beyond 200-205 Litres EVER, you must leave expansion room or you could potentially create a massive situation.

If you going to buy fuel in bulk, which is not difficult if your in a rural area get your drum/s fill by a bulk tanker Usually a body truck that often deliver's fuel to several farmer's on the same day.

If your smart you will have a cover for them and prop them up on chunk of 4x2 on one side at 90 deg to a line between the 2 bungs , this way any rain or moisture can drain off the top without the possibility of contaminating your fuel.

If you use a rotary or a quart stroke hand pump this will also limit any water condensation in the drum from being pumped into your car. Many quart stroke pumps have an inbuilt filter and water trap so this shouldn't be a big deal but it is something to be aware of. Before we moved to where we are now I had a 200 Gal above ground tank and could buy petrol for $1.10 or less / Lit from who ever had the best deal on at the time.
Honestly if your not using a LOT of fuel then Drums or Larger are false economy because the fuel can get stale with the volatiles escaping to the atmosphere over time, potential contamination and so on .
If your on the outskirts of town it makes more sense to simply buy fresh fuel from you favourite servo.

Step one would check the local Council rules before you do anything,
And then seek an amicable supplier who can deliver, OR has a depot that you can exchange drums, make sure you have an old light truck tyre that you can drop fresh drums onto from the truck or your trailer and NEVER drop them flat they WILL burst .
I grew up on the Farm dealing with all manner of fuels and Lubricants in bulk, so I do know what I taking about.


  • Like 1

Its going to be a hard one.

Running E85 on a car thats stored is a issue as you will need to drain the tank to avoid it absorbing water from the air.

Flex fuel is a issue, a little bit of 98 mixed with E85 drops the E85 content drasictly (not in proportion to how you would think) and can take a tank or 2 of straight E85 to get the ethanol contenet back up again.

Water in E85 makes the flex fuel sensor read higher (more E85) and can cause issues with the flex tune running in the harder tune when the fuel is contaminated with water.

This was all gone over at the SAU flex fuel night a Sabbaddini's last year.

Im thinking if E85 starts becoming hard to find that its time for people to start looking into running 98 with water meth injection.

The inputs to E85 (corn -24% over last 12 months)

I hope United keep carrying Ethanol. However, we need to be making it from sugar cane. Making it from corn is retarded. The yield (energy produced burning it vs consumed making it) is only 1.3 - that is you only get a 30% energy benefit. Sugar cane's yield is 8 or higher. You get 8 times (800%) as much energy as you put in to make the fuel. That's why Brazil has done so well with Ethanol fuel, and we can produce sugar cane in QLD so we should be on board. Corn ethanol is a waste of time and ties up land that could be used for something more productive.

I hope United keep carrying Ethanol. However, we need to be making it from sugar cane. Making it from corn is retarded. The yield (energy produced burning it vs consumed making it) is only 1.3 - that is you only get a 30% energy benefit. Sugar cane's yield is 8 or higher. You get 8 times (800%) as much energy as you put in to make the fuel. That's why Brazil has done so well with Ethanol fuel, and we can produce sugar cane in QLD so we should be on board. Corn ethanol is a waste of time and ties up land that could be used for something more productive.

Wilmar (Formerly Sucrogren) still produce E85 in like 200 Litre drums as far as I know. Don't know how much they supply or produce though.

i do wonder what the V8 supercars and other commercial racing are running for fuel? i'm sure if the demand is bumped back up with proof and commercial promoting of E85 as a reliable fuel it will coax the masses to see the fuel from a better perception

Edited by Dan_J

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, it went to Unigroup for a run in and tune on Friday, everything went (generally) well. In terms of fixes, the engine was good and there were no leaks. It needed plugs (I hadn't checked them because the coil pack cover was on a new engine and I couldn't imagine they weren't new.....but turns out the temporary plugs to just keep it sealed up were in there.....new plugs gapped to 0.8 and it was fine from there. Also, there was a little preload on the clutch slave which caused some slip. I haven't had the box off so I don't know what the clutch looks like; my guess it is brand new and the pedal had not been adjusted....backed that off a bit and it held fine. Last thing will have Dose crying....the idle especially when cold is a bit difficult between the cams, forward plenum, atmo blow off valve and an 80s air management system. It is fine when hot but a little uneven when cold, will see if I can sort or at least improve that one cold morning. Other than that, tuning went fine. It made 245 but was pulled back to 227 which 2 opportunities to improve in future. 1. The factory CAS is not great and was jumping around at high RPM, so Mark took 2 degrees out up top (that is why it stops making power and lost 20kw). Very safe this way and the extra power is available but will require a more modern ECU and better cam (or even better crank) sensor 2. The 2871 in factory housings is very big for a low mount, and the internal wastegate is too small, so it was creeping from mid range all the way to redline....the duty cycle on the boost controller is turned down a little for safety. That is much harder to fix, it would need a large external gate and that would require a whole bunch of other changes, so it will go as it is for now. It feels nice and healthy and safe, so should be good for about a billion laps like this.
    • what sort of caliper are they? If they are a slider and you gave everything a good clean, you might need to regrease the pins. My guess though is they will come good after some abuse as suggested above
    • I don't know what you should expect with an LS, but the oil pressure sounds terrible, sorry. As for the brakes, you can get fade from the pads not just the fluid, although generally that feels like a wooden block not doing anything while fluid feels like an oh shit there is no pedal so you can generally tell. What pads are you running front and rear?
    • Went over my datalogs on a whim and noticed a worrying combination of events. High RPM High Temperature Low Oil Pressure Knock Retard I bought some 10w-60 because I actually think this will be better going forward given track temp is 125C and 10-40 will actually be thinner in those environments. I know I had a leak but it's not entirely sure how much pressure loss can be attributed to that. The knock retard does correlate with all of the above. When it's not present oil pressure is higher. And by 'low' I mean at 6800 RPM the oil pressure was recorded as low as ~35psi pretty constantly. Which is obviously very not good. I'm hoping that thicker oil that ISNT LEAKING will result in a bit more pressure when I need it. Also in the last session I got a very spongy break pedal. I bled the lines as the car is on jack stand right now with the wheels off and I noticed... no air in the lines? Maybe the tiniest bit of tiny frothy bubbles for the first 0.1 seconds of bleeding the whole car? The breaks did come back to me after I backed off (and felt fine driving normally). Doesn't appear to be any leaks anywhere that I can see. Any thoughts on that?
    • Solution, run shitter tyres. Let wheel spin be your weak link 😛
×
×
  • Create New...