Jump to content
SAU Community

Recommended Posts

I've read conflicting information in regards to removing HICAS on an R33:

-Some say they removed the HICAS ECU and lost power steering.

-Some say they kept the ECU and lost variable-weight power steering.

-Some say they kept the ECU and retained variable steering weight.

I'm going to throw in a lock bar soon, but I want to make sure my steering (variable weight) stays the same.

Obviously I will keep the HICAS ECU and just de-pin the warning light.

So is it as simple as throwing in a lock bar and leaving the ECU plugged in?

Link to comment
https://www.sau.com.au/forums/topic/456770-final-word-on-hicas-delete/
Share on other sites

From what I gather, If I remove the HICAS ECU etc altogether...will I end up with single stage power steering and no speed assist? Or will I lose all power steering?

I've tried searching but nothing really matched what I was after, and didn't want to start a new topic yet. Car has already had all wiring removed, auto sparky was at my workshop today to get moving on the new loom.

Car is being fully rewired with basic loom and stand alone haltech, and have cusco drag rods in the back.

This is in a R33 BTW.

Edited by R31 drift pig
  • Like 1

Unplug, Remove, put a lock bar in. Simple.

I've already done this. There's no wiring at all in the car, drag links are in.

My question was pertaining to what happens to power assistance without any HICAS wiring/ECU/Anything, without making a new thread.

Question seemed relevant given the topic title.

There is a solenoid in the rack controlled by the HICAS ECU. Ive had power steering issues when me HICAS ECU played up. Replaced it and steering went back to how it should be.

I have a Lock bar and I just pulled the bulb out and have had no issues besides the one i mentioned above. But this could have happened with or without HICAS, its a 20 year old car, i expect these things

You dont want to lose the power steering assist from the HICAS ECU by just removing it. Its way to heavy at low speeds (parking etc)

There is a mod i think you can do where you remove the ECU and put 12v on one of the wires (which i assume goes to the rack solenoid) but you will just have full power steer assist this way

I think the obvious thing to do is to look into other Nissans of the same era that had variable speed power steer and no HICAS, and work out what little box of smarts was installed to do it. Grab one, wire it in in place of the HICAS CU, and enjoy all the benefits of installing the whole HICAS system in the skip, while still having nice PS. It can't be too hard.

By the same token, it's absolutely no trouble to keep the HICAS CU either. Let's face it. I did it 15 years ago and it's still sitting there under the parcel shelf, minding its own business, making my steering feel right and trying desperately to make the rear wheels move.

  • Like 2

I've already done this. There's no wiring at all in the car, drag links are in.

My question was pertaining to what happens to power assistance without any HICAS wiring/ECU/Anything, without making a new thread.

Question seemed relevant given the topic title.

you will have permannent heavy steering because the solonoid on the rack has no voltage being applied to it so will put no preload on plunger in rack. Easiest solution is take out the solonoid in the rack and preload with 5cent coins until you have the feel you want in the steering. I use 2 5cent coins in my drift car and feel is good similar to what you would have if you were doing 100ks with ecu controlling it. So to adjust simply more shims make it lighter less shims heavier.

  • Like 1

you will have permannent heavy steering because the solonoid on the rack has no voltage being applied to it so will put no preload on plunger in rack. Easiest solution is take out the solonoid in the rack and preload with 5cent coins until you have the feel you want in the steering. I use 2 5cent coins in my drift car and feel is good similar to what you would have if you were doing 100ks with ecu controlling it. So to adjust simply more shims make it lighter less shims heavier.

Awesome. Exactly what I was after!

Edited by R31 drift pig

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...