Jump to content
SAU Community

Recommended Posts

jeez. Just kiss already.

Doesnt matter which way you put it, a equal length front pipe is the best sounding RB26. But if you go single then it sounds mental on its own.

Some say a equal length is beneficial to allow the gasses to flow evenly out to the tailpipe and inturn helps with shuffling. I can definitely say that a equal length front pipe helps with shuffling. My midori front pipe shuffled like a fair bit up inclines. But with the mines front pipe I do not experience the same level of shuffling.

But biggest point here is sound.

The end.

That is not the purpose of this topic and if you go and google I am sure you will find many more theories on the differences.

They hug the body VERY well. I've never bumped them on the ground. They generally won't do an exhaust unless they have THE car they're going on... So they can get the fit spot on. Not sure if that's changed but that was the story a few years ago.

  • Like 1

They hug the body VERY well. I've never bumped them on the ground. They generally won't do an exhaust unless they have THE car they're going on... So they can get the fit spot on. Not sure if that's changed but that was the story a few years ago.

thanks Piggaz they said they could send me one I just wanted to see if anyone in sydney could make one just as good if not better so I can make sure it fits snug

The unequal length twin 3 inch system on the 33 gtr I have here sounds awesome, if only the 3L bottom end didn't make it sound like a VL.

You seriously think a few extra inches in a front pipe will make it sound any different?

The unequal length twin 3 inch system on the 33 gtr I have here sounds awesome, if only the 3L bottom end didn't make it sound like a VL.

You seriously think a few extra inches in a front pipe will make it sound any different?

Yes,

http://youtu.be/6dSrNZK6ogc

  • Like 1

The unequal length twin 3 inch system on the 33 gtr I have here sounds awesome, if only the 3L bottom end didn't make it sound like a VL.

You seriously think a few extra inches in a front pipe will make it sound any different?

for an extra couple of bucks, can't hurt?

The unequal length twin 3 inch system on the 33 gtr I have here sounds awesome, if only the 3L bottom end didn't make it sound like a VL.

You seriously think a few extra inches in a front pipe will make it sound any different?

You made them?

  • Like 1

Yes,

Lol, you believe a youtube sound clip? That is obviously not just swapping the front pipes. It's the mufflers that change the note, not the pipes.

I agree, it makes little difference to the price, although there are many more bends and you will be sacrificing flow for this equal length nonsense. I like to tuck my systems up, not have them hanging down lower. Each to their own I guess.

You made them?

This was Daz's car, he already had a twin 3 inch system, I am just making it work with the taller block.

I have done a few twin 3 into 4 inch systems, usually tapering back to 3.5 at the mid muffler.

My car came with the usual unequal length front pipe. I changed it to an equal length one (no other changes to the car) and the sound changed (used to sound like my old neighbour's 6cyl BMW, now sounds like a "real GT-R" :P).

  • Like 1

If some of you gtr owners are that purist, perhaps the stock exhaust is the go? I am sure Nissan will still have a few in storage.

The unequal length sidepipes on the Gibson GTR I worked on had a beautiful note at 8000 revs. :P

  • Like 1

Fact is, unequal vs. equal length front pipes produce different sound. I know I heard it on my car. Doesn't mean it sounds any less meaner, just different.

Here's another youtube vid.

Performance wise? probably no difference. Practical wise, unequal is better, my equal length hangs pretty low (lowest part of the car) and has copped some dents.

Lol, you believe a youtube sound clip? That is obviously not just swapping the front pipes. It's the mufflers that change the note, not the pipes.

I agree, it makes little difference to the price, although there are many more bends and you will be sacrificing flow for this equal length nonsense. I like to tuck my systems up, not have them hanging down lower. Each to their own I guess.

This was Daz's car, he already had a twin 3 inch system, I am just making it work with the taller block.

I have done a few twin 3 into 4 inch systems, usually tapering back to 3.5 at the mid muffler.

I am terribly sorry that I used evidence to give you an example. Or maybe the fact that I also changed front pipes to equal length ones and the note changed of the exhaust. Oh and didn't touch the timing nor manifolds. Now you are calling me simple minded? Give me some credit at least.

But I don't know why we are arguing. You are clearly wrong and now it seems you are just hell bent on being right.

That is not the topic of discussion here.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...