Jump to content
SAU Community

Recommended Posts

my 2cents:

I think you've tried making one in the past and you probably stuffed it up or found it to be quite difficult so you decided to convince yourself and your customer that it does nothing and is a waste of time.

don't be offended a lot people take this approach.

when clearly people are changing nothing other than a front pipe and reporting first hand that IT MAKES A DIFFERENCE IN SOUND AND..."some" also report slight power gains.

MINES have also been known to make pretty good cars and they clearly state that they are only interested in modifications that make a DIFFERENCE IN PERFORMANCE.

My 2c

By the same logic applied above, people who have shelled out $000's on front pipes or equal length pipes will "convince" themselves there is a positive difference in order to justify the spend and maintain the shoppers high they so desperately need.

Just. Do. It.

  • Like 3

My 2c

By the same logic applied above, people who have shelled out $000's on front pipes or equal length pipes will "convince" themselves there is a positive difference in order to justify the spend and maintain the shoppers high they so desperately need.

Just. Do. It.

this, all of this!! And don't forget mines will tell you they are better cause they salesmen and they want you to buy their product.

Power gain is probably going to a bigger front pipe, or something else.

I paid $250 for my front pipe (off fatz), money well spent :P.

Scotty, I think you mixed up something from that video, the first two 'runs' were inside the car, the other two were outside/sound sourced elsewhere (so went HKS inside -> MINE'S inside -> HKS outside -> MINE'S outside). The sound difference (in that video) between the HKS and MINE'S front pipes is pretty small IMO. MINE's one gives a bit more 'bark'.

If anyone has a twin 3 inch with no merge at all would love to hear that sample just to compare them

fatz had that HKS twin exhaust on his car, there might be some videos floating around somewhere.

Mines achieved something, they achieved the placebo effect, just watch their r34 "response monster" video it's a laggy dog with really really short diff gears in it

But

but

standard bore increases response

:unsure:

Mines achieved something, they achieved the placebo effect, just watch their r34 "response monster" video it's a laggy dog with really really short diff gears in it

A laggy dog that can lap Tsukuba in 57s in a full weight R34 GTR...

No one said it wasn't fast, but it's not responsive

Oh and it was an n1 so not quite a full weight r34 Gtr

Have you driven it to call it laggy? Have you seen its dyno sheet? Or are you basing this off of the videos you have seen...

Yes I agree that the reason why it appears to be so quick is because of its short diff gear ratios, however calling it a laggy dog is an over exaggeration... At the end of the day, it is a well set-up car and hence why it is fast

And n1 gtr's weigh about the same as a standard gtr: http://www.jlimports.com.au/nissan-skyline-r34-gt-r-1

So yes, it is a full weight r34 gtr

You can see when it falls off boost they wait, wait and go,

I understand that its a hero car to so many people (it was to me for a while) but sometimes you need to step back and see things for what they really are. It's a set of 2530s on a 2.6 Gtr there is enough evidence around to show how they respond

And it didn't do a 57 are Tsukuba just because of a couple of diff gears and some turbos, it has some serious suspension and brakes sitting under it as well

Im not defending it because it is a hero car, I was more so having a dig at that "laggy dog" comment and how you can make such a statement from only watching the car in videos, and despite the fact that professional racers who have actually driven the car have praised it on its acceleration.

And yes I agree that there is much more to the car than just the engine set-up that makes it fast - and no not the front pipes

thanks Piggaz iv got a tomei stroker too so should be the best comparison yet.

On the dyno. It's the best video I have sorry :/

th_36C2F2CF-1BF4-46B5-B37C-EB14ECBFD4CE-

Although it doesn't show the front pipes, i can assure you the rear pipe wraps around the front.

20121107_173138.jpg

EDIT: Video's on photobucket suck wang.

  • Like 2

On the dyno. It's the best video I have sorry :/

th_36C2F2CF-1BF4-46B5-B37C-EB14ECBFD4CE-

Although it doesn't show the front pipes, i can assure you the rear pipe wraps around the front.

20121107_173138.jpg

EDIT: Video's on photobucket suck wang.

haha unigroup hey, local boy unigroup is where I'm going to take mine for a tune also couldn't really hear the audio too well but it does sound like your engine has shitloads of torque down low which is good is yours on e85 Edited by mr skidz

haha unigroup hey, local boy unigroup is where I'm going to take mine for a tune also couldn't really hear the audio too well but it does sound like your engine has shitloads of torque down low which is good is yours on e85

Taken to PM. Save clogging up the thread with off topic dribble.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...