Jump to content
SAU Community

Recommended Posts

I am trying to club register my highly modified

R32 gts-t

But I'm being told I need a road worthy certificate

Does anyone know someone that can

Do me a certificate on a car like this

I happy to pay $$ for the inconvenience

Please contact me on 0421 060 029

If you can help

Regards Anthony

  • Like 1

Club reg ain't an easy way around modifications - as you've found you still need a RWC and these are very hard to get for modified cars - not many leniant people these days because they are very tough on licence holders for passing cars that shouldn't. Best bet would be return to roadworthy state for RWC.

honestly the new modified car scene is all about stealth now. Even if you pass a dodgy roady, down the track you would most likely get defected, and if it involves epa then probably your best bet would be to make it a track only car assuming you have done a lot of engine work.

I think they recently changed the club reg rule, so people need a rwc every year right? someone confirm ?

I would just try to make everything look as stock as possible, hide everything and paint them black. make the car quiet and put standard rims and wait the hight. then go to some roady place in the bush that doesn't know anything about these cars and hope for the best

so for club reg.

it's basically same as normal reg now.

Full RWC on rego. Enginners certs for any modifications.

if there are modifications you will be issued with a M plate stating you ahve modifications (cop bait in itself)

The club in question must photograph the car when it is regoed.

If the club at any point thinks modifications have been made to the car they are to report that to vic roads who will ask you to get it checked.

you can still be EPA'ed and defected on the new club rego,

basically people were abusing the system and regoing unsafe cars on club rego as some clubs would take $$ for a club rego and ruined it for every-one.

I've recently read up on this and from what I can tell, it's easier to engineer a cage, can run wider wheels and talker tires than regular reg, fuel system upgrades fine as long as no in cabin components, brakes upgrades allowable, engine swaps from same manufacturer ok (without a vass I believe but might be wrong), power increase of 30% allowed unsure how a cop can tell how much power over standard it has :s.

I read this a but over a month ago so don't take it as gospel .

All the VSI documents are online and you'll find you end up with 3/4 open as they refer back to each other and certain sections.

See here https://www.vicroads.vic.gov.au/safety-and-road-rules/vehicle-safety/vehicle-standards-information

See mainly 33 ,26, and 8

Edited by anon32
  • Like 1

I've recently read up on this and from what I can tell, it's easier to engineer a cage, can run wider wheels and talker tires than regular reg, fuel system upgrades fine as long as no in cabin components, brakes upgrades allowable, engine swaps from same manufacturer ok (without a vass I believe but might be wrong), power increase of 30% allowed unsure how a cop can tell how much power over standard it has :s.

I read this a but over a month ago so don't take it as gospel .

All the VSI documents are online and you'll find you end up with 3/4 open as they refer back to each other and certain sections.

See here https://www.vicroads.vic.gov.au/safety-and-road-rules/vehicle-safety/vehicle-standards-information

See mainly 33 ,26, and 8

half cage can be egnineers not a full cage they changed that a few years ago.

tyres 2 inches bigger(wider or higher) ok.

fuel system is ok I think

brakes have to be engineered

engine swap for a engine that was avalbiel in that car.

eg no RB25 in a S-Chassis

no ECU mods unless you do full EPA tests.

Apparently you don't need an engineers for a full cage if it meets VSI28.

Check page 3 of it top right corner

VSI28 is no longer valid, thus is in the superseded section of the site.

Edit:

new regs:

http://www.infrastructure.gov.au/roads/vehicle_regulation/bulletin/pdf/NCOP7_Section_LK_Seating_and_Occupant_Protection_1Jan2011_v2.pdf

so rear is ok.

Full not so much unless manufacturer supplied.

actually VSI8 article 9.5 refers to roll cages:

https://www.vicroads.vic.gov.au/~/media/files/documents/safety-and-road-rules/vsinumber8guidetomodificationsformotorvehicles.ashx?la=en

9.5 Internal Rollcages

internal Rollcages must be certified by a VASS signatory as complying with either VSB14 Modifications Code LK8 or with Codes LK9 and LK10

VSB LK section:

http://www.infrastructure.gov.au/roads/vehicle_regulation/bulletin/pdf/NCOP7_Section_LK_Seating_and_Occupant_Protection_1Jan2011_v2.pdf

LK8 deals with half cages,

LK9/10 deal with full cage.

not that I have read all this at far too great length.

Thus why deregistering car shortly.

  • 2 weeks later...

I am also looking into club registration for my '90 R32 GTR. I noticed they have started changing the rules for 'Club Registration Plates'. I haven't got a problem getting the roadworthy for my car. As I have only used after market 'Garrett GT 2860R's. And use a '3.5" Cannon, X-force/Varex 3-stage electric controlled muffler, which limits it down to to close to the 90db mark. My mechanic is going to sign off on it for me.

My thought is with this though. What are the other restrictions that they have pushed upon us? I want to set this car up for casual street driving, and as much track options as possible. Is it still worth getting the club plates still?

I actually logged in, to to see what other members from 'SAU' might be using for club registration/plates in the Victoria Northern Country area. I'm in Bendigo. What 'Car Club', should register to for club plates with? I was thinking 'Ballarat Car Club.

Anyone help me with this?

Any other links/threads about?

Thank you in advance.

WHITEBEAST.

FYI Varex isn't EPA legal

My mechanic is going to sign off on it for me. "I put it on after that." (2 cops that didn't notice it, have let it go so far). Wonder if VICROADS do!

Found links to sauvic.com.au. Be joining. - For club registration information.

Thanks guys.

what people do is run it on the street till defected then dedicated track car....

This is the question. How long will my club plates last. Hopefully I can get it all sorted with engineer certificates and compliances.

What happened to peoples rights to drive high powered cars on the street safely? Even if the aged restricted it, or even better yet. Make bigger fines for club car drivers that fail to do the right thing by driving dangerously on the streets.

to be honest club rego will last less time than regular.

if you have modifications to your car your get special modification Club rego plates...and thus makes you cop bait.

Club rego for modified cars is a dad thing these days...only good for standard cars.

My mechanic is going to sign off on it for me. "I put it on after that." (2 cops that didn't notice it, have let it go so far). Wonder if VICROADS do!

Found links to sauvic.com.au. Be joining. - For club registration information.

Thanks guys.

Yeah most cops won't notice it. I've never had trouble with mine but there are cops who know what they are and can recognise em. Just sayin don't be surprised if it's part of a defect - noise testers (when clearing an EPA) also do their test with it on open mode from my experiences.

Last time I dropped in to spectate a matsuri they had hwp sitting on the entrance road to Winton, casually picking off cars... I must say, I felt very safe in the skyline, compared to the majority of the drift kids and their "daily's"

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi everyone, I'm about to complete my first single turbo conversion on my R32 GTR and I thought I would post the step by steps that I will be following. I will list the parts I have / the parts I will be buying. I will be redoing this guide after I have completed the conversion. Parts list: - 3576 turbo 0.82 v-band (coolant and oil)  - v-band top mount turbo manifold - 50mm wastegate - manifold copper gasket - titanium manifold stud kit - turbosmart 3 port boost solenoid - link can lambda kit (wideband) - link ECU - radium 12AN push in valve cover fittings (pair) - hi octane catch can - 3.5inch downpipe - screamer pipe - pipe from turbo to intercooler - intake pipe setup - power steering relocation kit - oil drain block off plate - coolant and oil lines Now onto the step by step guide (please add / correct me if there's anything I missed: 1. remove fluids, twin turbo pipes, pod filters and afm's 2. remove the factory coolant hardlines from the hot side. 3. remove heat shields  4. remove the downpipe 5. remove turbos and manifolds 6. remove factory manifold studs 7. clean whatever mess you have made 8. install power steering relocation kit 9. install new manifold studs 10. install new turbo manifold with gasket 11. install new wastegate with screamer pipe 12. install new turbo  13. install new coolant and oil lines  14. install rear oil drain block off plate 15. stop and appreciate that you now have a single turbo in your GTR 16. wipe away tears of joy and install downpipe 17. install the wideband sensor into downpipe 18.install pipe to connect turbo to intercooler 19 .remove stock boost solenoid  20. install new boost solenoid 21.  install intake setup 22. setup the rest of the can lambda kit with the ecu  23. refill fluids and hope for the best 24. ask forums for help with issues 25. fix issues 26. drive your single turbo swapped r32 GTR into the sunset. Doneeeeeeeeeee. Now I know this isn't detailed at all but I will be doing that when the conversion is done. I will be posting pics and any helpful details i can and ill make sure to fit in as much information as I can. If there's anything I should know before i do this PLEASE let me know. Stay tuned for what's next. Thanks...
    • I have wasted too much time on this, more than I am willing to admit. I hope someone can set the record straight for me.  I want to replace my Nismo (non GT pro, non GT) standard 2 way in my R33 GTST with a 1.5 way... Ideally I want to get an ATS 1.5 way Carbon LSD, but I don't want to reuse my 29 spline 5x1 axle stubs, and new 30 spline 5x1's are impossible to get a hold of ($$$), and I don't want to drop the cash on going to 6x1 stubs and axles ATM. Which leads me to the Nismo GT Pro 38420-RSS15-B5 or RSS20, as they come with new axle stubs meant for the diff, and is "Convertible" from a 2 way or 1.5 way to "Other ways", but that is where I am stuck as the documentation is a bit all over the place.  To sum up what I have found I believe the all the Nismo GT Pro PN's are convertible from 2 way, 1.5 way, and 1 way; but Nismo sells 2 skus (2 & 1.5) so people do not have to disassemble to convert it.  I found this thread on 350z but it left the question unanswered. https://my350z.com/forum/engine-and-drivetrain/620032-nismo-gt-pro-lsd-1-5-vs-2-way-and-torque.html  Essentially the way I think it all works out is like follows...  2 way  1 way  and 1.5 way would be the center pinion shaft in the 1 way block, but with the with the center flipped 180*. So the ramped side of the pinion would face the 1 way gate and act like a ramp.    I can only get my hands on the 2 way in the states, and I am not trying to get stuffed on tariffs by ordering from Japan or anywhere else. I want to confirm that if I get the 2 way I can convert it to the 1.5.     
    • Hi everyone, I have purchased my first GTR and I want to do a single turbo conversion to it. I've been doing as much research as i can and there are a few things that I can find and need to know. I need to run a coolant feed, coolant return, oil feed and oil return for my turbo setup. Here's what I know so far: On the hot side of the rb26 there is coolant feed, oil feed and oil return. Coolant return will be going around the front of the engine to where the thermostat is located. I will need to block off the rear oil return port. I will be running a turbosmart boost solenoid so any of the factory boost stuff wont be needed. Now onto what I don't know: 1. What do I do with the coolant / vacuum hardlines that run around the back of the motor?. 2. What do I block off or loop or move or remove?. I will be running the OEM intake manifold. 3. Is there anything in particular I need to buy for the cold side of the rb26?. I already have the intercooler and pipes sorted. If you have any pictures or information it would be appreciated. Thanks....  
    • The fab work can be as simple as a couple of silicon hoses and clamps to the factory piping. 
    • Just sounds like either way you need to do some fab work to get everything to fit, so why limit yourself at that point? If the GCG high flow option is zero effort in and out swap though I'd probably do that. It's almost certainly lowest risk, lowest cost, etc. The HKS GTIII-RS option that Kapr mentioned is laughably expensive for what it is, they charge the exact same for two turbos on the RB26 so their margins are off the charts on that thing.
×
×
  • Create New...