Jump to content
SAU Community

Recommended Posts

Thanks guys, have all be added to the list :)

Thanks for the update Shehan.

Could you see if they can come on here to add them on the official list?

Just about 24 hrs to go guys!!!

wow, thats big attendance list.

should be good.

FYI, anyone wanting to spend the whole day and into the evening out, the solar storm is still going with another predicted burst late Sunday night... considering they were seen as far north as port earlier in the week,Robertson should be a good spot to see the aurora australis...

  • Like 1

Are we limited to only bringing skylines? Or can we bring any car? I've got a few people who'd like to attend but don't own skylines.

Also I'll be joining the cruise at Picton road, thought I'd give a heads up.

Anyone and everyone is welcome, Shaun. It doesn't matter what you drive.

SAUNSW only requests that all attendees must obey the rules of the event as listed on the 1st page of this thread.

Cheers!

  • Like 2

Are we limited to only bringing skylines? Or can we bring any car? I've got a few people who'd like to attend but don't own skylines.

Also I'll be joining the cruise at Picton road, thought I'd give a heads up.

I haven't owned a skyline in 2 years if that answers your question?

The guys let me hang around at events out of pity ;)

  • Like 1

Liar! PJ thinks he's had us fooled for years what with his paper mache Z shape panels.

Wagzy you can rock up in anything you like.

Hey! I'll have you know that I use plaster of paris. Only the best will do for my little nugget ;)

  • Like 2

Just checking to see where the meet point is at Albion park?

Adam

Hi Adam,

I would think it's at the Public School there. We normally park up around there on previous cruises. Just opposite the Caltex.

Cheers.

Hi Adam,

I would think it's at the Public School there. We normally park up around there on previous cruises. Just opposite the Caltex.

Cheers.

St. Paul's Catholic School.

Any idea what time you'll meet there?

Edited by Nod089



  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...