Jump to content
SAU Community

Recommended Posts

Ok first a bit of history

I bought the car in 2003 it came with the usual exhaust and pods and beyond that was pretty much standard, i replaced the fuel pump and had the factory ecu remapped and made a respectable at the time 235kw at the wheels

In 2004 I sold the car and stayed in contact with the new owner, come easter 2007 the owner decided he wanted to part with it and after a check over the deal was done.

Image005.jpg

Over the next few years it stayed basically mechanically the same but got fitted with a set of r33 brembos and a new set of wheels DSCN0097.jpg

In 2011 the engine finally let go and after dramas with the engine builder I lost interest in the car and it sat outside, untouched for about 3 or so years. Eventually I bought and fitted a stock r33 engine, removed the hicas and fitted another set of wheels BE45199B-21D6-4332-A0D8-DFF69E14B8B2-334

So here we are today and I've finally decided to do a build but won't be anywhere near as big as the previous one was. The goal for this build is to make 373kw (500hp) at the wheels with as close to standard response as possible

Now on to the build

First things first after sitting around for so long, with my little helper I replaced all the oils in the car 38715BAD-0206-4564-8071-EAA643FC9322.jpg

Then took it up to jez for a baseline run so that we know where I'm starting from and know how far I need to go8DDD7264-F675-4601-8890-6964AD4070D8.jpg

So here we are with the baseline and a plan in place that I will reveal as the build continues

  • Like 5
Link to comment
https://www.sau.com.au/forums/topic/458011-r32-gtr-long-term-love-now-project/
Share on other sites

I'm going to try and keep the updates weekly in order to stop the thread/build going stale, not everything will be a performance upgrade, there will be some general refreshing and tidying up as well. But there will be photos and information of everything that gets done along the way

This won't be a do everything in one hit build, it's also not going to be a slap a bunch of crap together and hope for the best. It's going to be a very thought out and have a few things a lot of people either wouldn't do or wouldn't think of

TBH it's very hard to find info on E85 and -7's.

i just said stuff it and we will find out. Tuner thinks 350-360 on E85 and they will run out of puff. Will report back when she is finally fixed though. Can't wait to see what you will do man!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
×
×
  • Create New...