Jump to content
SAU Community

R32 Gtr Long Term Love, Now Project


Recommended Posts

Got some free time again today so I spent a few hours working on the car again

So I pulled out the gearbox and the clutch that was in it was in surprisingly good condition considering it's been in there since I bought it in 2003

F602C262-493D-463B-A9F4-01781C724A96.jpg

Here's the clutch that I removed

F4782AF1-79DF-4663-8056-38FA3824186A.jpg

And the nismo clutch bolted up with the "clutch aligning tool"

CE7617EF-44F9-4CDD-BBD7-2E3A4F06304D.jpg

  • Like 1
Link to comment
Share on other sites

With the gearbox I decided to change a couple of thing that needed doing and were easier to do while the box was out

First one being the power harness which also has the gearbox connections on it, it had come undone and looked untidy, so it was replaced

E7288E32-3DB9-40BE-873B-AF3C09FDEB3A.jpg

and also the car had a vibration under hard acceleration and rather then put up with it feeling like a VL commodore I bought a new one and fitted it. Which was even easier then I expected it to be

12A29CF7-031B-431E-925B-A0334813444F.jpg

Link to comment
Share on other sites

So today I had some time and I did the last couple of things that needed to be done before dropping it off to get tuned

First was the a set of cam gears

F5D539BC-2B45-4FD1-A5AF-564EAA216623.jpg

And I managed to replace them without needing to take the balancer off which helped saved and hour or 2, but I wish I had of worked it out earlier and I could have saved even more time

1D21CEC5-8878-463E-A349-816070B7A6C1.jpg

then I drilled out a spare factory fuel rail to suit an 11mm injector 34943C53-FDD4-452A-9725-DED3A964B906.jpg

And the last thing was changed the spark plugs and when I inspected the factory coils I could see signs of arcing so I replaced them with a set of split fire coils

35C89724-6B8F-4536-89A3-9177555816ED.jpg

DFBB57BB-4EF0-4AD6-9D3A-D87DC0F38C26.jpg

Link to comment
Share on other sites

Ok not really related to the Gtr it self but it's living space, while the Gtr was away I decided to paint the garage floor to make working on the car nicer and easier to clean up afterwards

Before

443B6029-5915-427A-BF9E-3F5270328DA3.jpg

And after, I think it look a lot better and makes the place brighter B423C3FA-5F91-44F4-9C49-5440C6E8F74B.jpg

Also the results are in, will update ASAP

  • Like 1
Link to comment
Share on other sites

Technically it took 3 days but there was only about 6 hours in actual working time. It took about 2-3 hours to degrease and clean the concrete and then 24hrs to let it dry, to put a coat on took about an hour or 2 but then it was 16hrs between coats and 2 coats was enough. After that it recommends 4-7 days to cure before putting anything on it

The paint was just white knight branded garage floor paint from bunnings and a roller with a few cheap mats to put it on the floor

Link to comment
Share on other sites

Grabbed the car today and the results were a little low compared to what I expected for this round result was 281kw with 1.5bar of boost and at 6,000rpm would choke to the point it no longer reved

1F255AFD-43CD-4F64-8C9E-7EF749723E20.jpg

We believe the exhaust is the culprit, basically after the drama with the engine build, I grabbed a bunch of second hand parts and put them all in there to make the car drivable. Which means the next upgrade will be building a proper exhaust that I know will never become a restriction

On a positive note it has lost very little in the way of response and makes more power down low then previously

  • Like 1
Link to comment
Share on other sites

Technically it took 3 days but there was only about 6 hours in actual working time. It took about 2-3 hours to degrease and clean the concrete and then 24hrs to let it dry, to put a coat on took about an hour or 2 but then it was 16hrs between coats and 2 coats was enough. After that it recommends 4-7 days to cure before putting anything on it

The paint was just white knight branded garage floor paint from bunnings and a roller with a few cheap mats to put it on the floor

Did the same. Unfortunately the tyres pull the paint off the floor and it looks shit.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Me too. Apparently the new version of Invision will allow some customisation so look forward to a 'Love' reaction and a new 'Like' icon.
    • Which injectors are you using? It's likely the fuelling is off also, so as above.
    • Awesome to know. I have a Series 1, and When pulling my front bumper off for the first time i realised my reo/crash bar was a bit worse for wear, and was going to try pick up a better one soon just so i can replace it. Someone is selling a full series 2 front bar and brackets for a decent price, so was going to probably reuse my brackets and install the new second hand reo/crash bar. I also have a genuine Altia body kit to do up, spray and put on, and not sure if that will use the series 1 or series 2 brackets for the front bumper, so having both will be handy, and knowing i can drill holes out to make stuff fit between series is also handy to know!
    • I should also say that the while they are different the only parts that matter are the center headlight supports and center bar from S1 to S2. The center bar will work, but the S1 has holes that clips go through into the S1 bumper. So if you were super cheap you could simply drill the S2 bar. Same thing with the side/wings. They have slightly different 'clips' but can be made to work. The center headlight brackets however, cannot. This is also where the GTR differs, which has a different center bar, and different headlight supports (to either GTT system), it also has different 'wing' headlight supports which is what I am calling under the headlight. However those CAN be made to work with the GTT Reo for a GTR front bar by a small spacer and a drill/tapping a thread into the reo because the bolt positions are slightly different. So people only really need the center brackets to go between GTT S1, GTT S2, and GTR if you are happy to do some tinkering.
    • Indeed  😃  Appears the site is back up now (migrated not updated) - kudos @funkymonkey & @PranK
×
×
  • Create New...