Jump to content
SAU Community

Recommended Posts

It has midori dump pipes, 2x70>Into 80mm front pipes (not sure of brand as rage was missing) 3in 100cel cat and a hks cat back (the one with the huge mufflers in it.

But of corse for curiosity sake when I installed it i had a look down the exhaust and being a jasma exhaust it came with a free resrtictor in the center muffler

I had always intended to replace the exhaust anyway as I was never happy with how low it was and It didn't sit up in the rear bar how I would have liked

So now it's going to get a fully custom made stainless steel one that hugs right up into the body

Only a little update this time, I took the exhaust off the car and took it for a drive (I'm sure the neighbors were real impressed lol) and it reved clean and it made power!! luckily the next job was always going to be exhaust, so me and my mate will be building an exhaust for it ASAP

Also the car has decided to leave it mark around the place and that will be the next little job that also needs doing, is power steering and transfer case oil

E7DA229C-AEEC-46DC-8DC5-CFE3A79BA866.jpg

  • Like 1

Also turns out the leaks on the power steering are form the feed line to the pump and the transfer case is the speedo seal, so will order the o ring for that and do the actuator seal while I'm at it. The power steer line I will probably make up a custom one using dash fittings

  • 2 weeks later...
  • 2 weeks later...

Sorry haven't up dated this for a couple of weeks but was crook and then had things to do to the house,

I've only done a really small thing to it. Basically I've never liked that the superlaps don't have center caps and got some adaptors that allow me to fit some

Went from this

1C7C6251-16E9-4E97-9188-04A0FDCAE1D9.jpg

Added these 2 parts 265FB918-8A70-47AF-8707-20534BFAF136.jpg

114135F9-1D06-453A-8945-AF95726D6657.jpg

And ended up with this

EBAF575C-ADF5-4873-AE1A-654BDA7EEF8C.jpg

  • Like 2
  • 3 weeks later...

Another small job this week, the boost gauge has been an eye sore for a while after the bracket broke

09638E13-89B9-43E0-A649-60A359056720.jpg

So a trip to skyline spares and a little money later I was able to buy a second hand bracket and fit the gauge in it. Looks a lot better, it's amazing how the little things can make a huge difference

C3377158-E5A6-40BE-A373-1C4A7B03F7D5.jpg

sorry for the terrible photos but it was dark inside the garage

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
×
×
  • Create New...