Jump to content
SAU Community

Recommended Posts

Singapore Noodle Soup!  It is a bit of a dog of a job but so satisfying when it's done!  I'll be doing mine for the second time at some point which I'm not looking forward to.  It's amazing how much neater you can make it all look with some well routed wiring.

Enjoy! 😁

  • Like 1

There won’t be a single Nissan ecu sensor on the engine any more which basically made the original harness completely redundant, I was trying to pay someone to do this but everyone I spoke to had either stopped doing it or just came across as an arrogant prick

On 25/06/2022 at 9:48 AM, r32-25t said:

There won’t be a single Nissan ecu sensor on the engine any more which basically made the original harness completely redundant, I was trying to pay someone to do this but everyone I spoke to had either stopped doing it or just came across as an arrogant prick

I'd stop doing it or be an arrogant prick if I had to do wiring all the time too! 🤣🤣

  • Haha 2

Been doing some part collecting 

90FF21D1-965F-4F10-B08A-37B9DA831456.thumb.jpeg.104fb25fdcf52e630df931668b13d658.jpeg

first we have the oil pump blank because of the external pump the engine will now have 

33A629AB-FF79-4FDD-8B58-3DFD1502769D.thumb.jpeg.dfa335c0df97d694897c424244336e01.jpeg

new set of cam gears from prp, my old ones were fine but I like the locking system prp have come up with on their versions 

CCFB1E61-2242-4251-806C-2A41861048E6.thumb.jpeg.f945917d2274aece5d57278dae21e613.jpeg

new timing belt, tensioner, idler, washer and crank gear 

242C437F-1BFD-41C8-BFED-6EA5F168A8EE.thumb.jpeg.7d3c84d42af8cdb65b5099da35c20964.jpeg

brand new rear main seal housing just because 

6356A9BA-5BE5-43EC-8C8A-AEA5D16D505A.thumb.jpeg.d8a0529d60f44d982a011492235ac425.jpeg

and all new seals from nitto (they came in the full gasket kit)

  • Like 4

Haven’t touched it again yet, will get try and get the body wiring back into shape and taped up soon then need the engine to be able do the rest 

i know how you feel about all the car doing is collecting parts and dust 

  • Like 1
  • 2 weeks later...
  • 1 month later...
  • 3 weeks later...

Thanks, yes it does and I’m pretty sure it’s the first time I’ve seen it out of the box. I opened it a couple of times but I’m pretty sure I never took it out 

  • Like 1
On 9/9/2022 at 7:00 PM, r32-25t said:

291C4C72-B759-46F8-9F76-62E5C882FF8A.thumb.jpeg.0043b985064787d9c3b9c58737ef2a21.jpeg

shit just got real 

Haha, I was going to call you yesterday afternoon, I went past APM to see how they were travelling with my motor, they told me they just finished the billet one and mine was next. I though you’d be happy.
 My pistons have arrived. 

  • Like 1
On 10/9/2022 at 11:19 AM, Old man 32 GTR said:

Haha, I was going to call you yesterday afternoon, I went past APM to see how they were travelling with my motor, they told me they just finished the billet one and mine was next. I though you’d be happy.
 My pistons have arrived. 

Your pistons arrived a lot faster then mine then, I would love to have seen them before they went in though, I put a camera down the spark plug hole and the crown is so big that they have an area to leave clearance for the spark plug electrode 

On 10/9/2022 at 2:05 PM, r32-25t said:

Your pistons arrived a lot faster then mine then, I would love to have seen them before they went in though, I put a camera down the spark plug hole and the crown is so big that they have an area to leave clearance for the spark plug electrode 

Photo?

what compression ratio did you end up with?

photo of the head?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
×
×
  • Create New...