Jump to content
SAU Community

Recommended Posts

FD has better balance, infinitely better handling and stock for stock more reliable than shitty RB's

Finding an unmolested example of either is very difficult these days

FD's consistently hosed GTR's in the 12hr races in early 90's. That should give you a clue.

Rb over a rotor any day.

More grip

350kw on stock motor

Don't have to put 2 stroke in it to stop it burning oil

Better fuel consumption

350kw? are you high? more like 270 MAX. Struggle to hit that on a stock R.

FD has better balance, infinitely better handling and stock for stock more reliable than shitty RB's

Finding an unmolested example of either is very difficult these days

FD's consistently hosed GTR's in the 12hr races in early 90's. That should give you a clue.

I would argue that stock for stock GTR's are much more reliable TBH. Rotors are more touchy than a woman on her period.

Basically with a rotor be ready to rebuild it. They have massive overheating issues that you need to address properly. They have the smallest heat margin i have ever seen. It's something like 10 degrees is the difference between all is well and bang. They can be trouble when trying to push too much power out of them.

In saying that GTR's have issues as well. It all depends under what application you are driving. The oil control comes into play if you want to move them in any way.

So it depends. Do you want to spend thousands fixing cooling issues in the RX7 or thousands fixing oil issues in the GTR.

Both cars will require another $5000 around that ontop of what you spend to buy it at least to make them reliable. This is not taking into account performance upgrades at all, this is the money i would spend to make them daily reliable. Provided the engines are in good condition to start with.

Also FD's are f**king tiny. No space what so ever, many people i know struggle to even fit in them. Trying to get the interior to look nice with the required gauges you need is almost impossible.

FD's do handle really nicely in stock form. You could get one and not have to touch the suspension. GTR's are not tooooo bad. In stock form they will understeer, sway bars will counter this issue.

One of my very good friends has 2001 FD3s RS currently on the boat coming here. It's going straight to Ric Shaw to get intercooler, radiator, and gauges done. He isn't even confident to drive it back to canberra without the radiator and intercooler done. They are that bad.

TL;DR they are both money pits. Don't buy 1 unless you can afford 2.

Apart from that it will be personal opinion. What one do you prefer? Do you want the braap braap of a rotor or the howl of an RB?

just my 2c.

Basically with a rotor be ready to rebuild it. They have massive overheating issues that you need to address properly. They have the smallest heat margin i have ever seen. It's something like 10 degrees is the difference between all is well and bang. They can be trouble when trying to push too much power out of them.

You talking rotors in general, or FD's in particular? When I had cooling issues, then fan-belt alignment issues I saw my 12A spike over 120 deg lots of times, and it spent a lot of time over 110 deg. Never went Bang, nor did it need a rebuild. Must admit it was getting a bit tired by the time I sold it - I'd spent 5 years rallying it, and god knows how long since it had a rebuild before I bought it (I'd sorted the cooling issues by then, and it ran a comfortable 90 deg no matter what I did to it)

Well maintained rotors are as reliable as anything else on the road. I'm hearing a lot more reliability issues from RB's than I do about injected rotors. Of course bolting a huge turbo and running 800HP out of a rotor is going to make it wear out faster.

Very true comment about personal preference. The RX7 was built from ground up as a sports car. The Skyline is a converted family car (although build quality is admittedly very good - no doubt about that). Different cars for different markets. Personally I'd go a stock FD over a stock GTR but I've always preferred nimble cars to brute strength. I think for dollars spent on mods, an FD would be faster and more reliable.

This

Just realised who OP is.

Nothing more than another theoretical discussion point, then.

Ask this same question at OzRotor and see what responses you get

Rotang FTW.

Just as long as you like noise and buying petrol and rebuilding motors.

Depends if you like Rb's or Rotors

Also depends what car you like the look of

I will own a RX3 Savana one day.

Been trying to convince my uncle to sell me his, Been sitting in the gararge for the last 15 years with a 20b or 26b from memory

FD's consistently hosed GTR's in the 12hr races in early 90's. That should give you a clue.

they also lied about their engine capacity to win races.

they don't go that we'll for the 3.9l engine they are.

Personally, as a stock daily, you don't need to touch the oil system on a gtr.

short blasts are fine, and that's all you'd be doing on the road.

never had a problem with mine.

Not sure about the rx7 as I've never driven one, but would like to one day.

  • 10 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...