Jump to content
SAU Community

Recommended Posts

Anyone paid their rego late? 2 Regos due this month, neither cars are on the road.

Vicroads website says you can pay rego up to 3 months after it expires, you're just not allowed to drive it until you do. Anyone done this?

Yeah I've done this for a car I wasn't using. You can leave it lapsed for 3 months before you need to re-register with a RWC. Until that 3 months you can just pay it at any time as you normally would...however...it doesn't extend the registration period so if you pay after 2 months you only get 10 months rego out of it :(

Anyone paid their rego late? 2 Regos due this month, neither cars are on the road.

Vicroads website says you can pay rego up to 3 months after it expires, you're just not allowed to drive it until you do. Anyone done this?

drive it unregistered anyway but keep a kg of ice in the boot and a hand gun in the glovebox. they wont worry about the rego if you get pulled up.

  • Like 2

Just don't do what a mate of mine from uni did...

Left it for 2 months, drove it anyway... got flashed by a red light camera after getting stuck behind a truck in a turning lane and didn't see the light changing....

$$$$$$ Unregistered Vehicle fine

+
$$$$$$ New Rego costs
+
$$$ Red light camera fine
=
The better part of $1500, didn't see him at any of the Uni Bar nights for the next few months after that

lol unregistered fine is exactly the cost of rego, have to hand it to them it's incentive enough to register...but sucks for people who haven't received notices and now the stickerless system there is no easy reminder of when it's due.

I'm told you can register on VicRoads to get sms reminders of it.

I copped a fine for unregistered driving but I paid rego on the spot while the cop was there (she wouldn't let me drive off unless I paid it then and there), then sent a letter to civ compliance pleading ignorance (it was true I hadn't received any rego reminder in the mail) and they let me off = save $700 worth of fine.

Hmm wheel decisions. Work Emotion CR Kai bronze (second hand), R34 GTR wheels (second hand) or MP37s (brand new with new tyres)? All should cost me between $1,500 - $2,000.

Here's a picture comparison:

Work Emotion:

http://farm8.staticflickr.com/7336/9408532537_64deef3197_b.jpg

MP37 (same style, not genuine TE37's)

http://www.daidegasforum.com/images/351/nissan-gtr34-nera-black.jpg

GTR wheels:

http://imgur.com/vDarLcx

manufacturer built a char grill for us, all compliant to AGA standards. arrives at the site with no flame failure(a mandatory requirement, selling them without this = a huge fine), company refuses to fit it, AGA gets involved... now we wait.

While I agree NOT building a road for the better part of a billion dollars is a completely retarded idea... you do realise that report also says the contracts shouldn't have been signed in the first place right? it's even in the headline...

In any case we probably wouldn't need another 92 schools if Kennet hadn't closed and sold off 350 ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...