Jump to content
SAU Community

Recommended Posts

Random car broken wtf problem.

Turbo howls when in vacuum (between -10mmhg and 0) and then stops at about 6psi and then sounds normal.

No, it is not the exhaust drowning it out.

How can this be a thing.

All I have done is tighten the v-band that is connected to the external gate (which is off the housing), but the problem happens at a point where the gate isn't even in play.

I don't really know what it is, pretty confident there's no boost leaks (sadly I have become very very very intimate with my charge pipes and clamps and silicon joiners and they are all replaced).

Just sounds like a big WOOOOOOOOOOOOOOOOOOO as its spooling but no sound when actually making boost. The car sounds naturally aspirated from 7psi to 25psi which is really quite weird feeling. Just very much when the turbo is spinning up, but I wouldn't say its surge because you can hear the turbo spinning *down* after you come off throttle and you are around -15/20mmhg, which is just flat out strange.

In b4 turbine blown out of exhaust or compressor wheel in intake valves, but of course both the wheels look perfect and have no play.

so you've inspected the exhaust side of the turbo after the noise started?

Sounded like a manifold leak but not ticking, just a weird... sound. Could actually be an exhaust leak from the actual exhaust because I may have hit the flex join on a few things but you know, check everything.

Fixed hose clamp going to gate from exhaust housing on turbo. You could move the band around previously so clearly it could be better sealed. Removed and new bolt after cutting the original bolt off with a hacksaw because long story.

Howly sound and better feeling engine/spool so assumed fixed.

Just makes a loud sound now. Didn't make any kind of sound before fixing the vband. Maybe always broken. Maybe not.

Dropped dump pipe and intake, had a look, spun wheels around, clearly not making contact and all the fins appear to be intact, etc.

Its more the intermittent nature of it that makes no sense, I've had leaks and manifold to turbo gaskets go etc, and it SOUNDS like that but all of those don't mysteriously stop making sound at 7psi.

I will borrow a gopro and make a video cause everything on the net seems to imply it shouldn't be possible, but hey, not like the limits of reality has ever contained this car's ongoing problems.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah well per the video it took 15s for the stock unit to start up....even if I give it a few seconds discount for starting that is at least 12 sec before you get a reverse camera if you are trying to leave a park.  The android unit is way faster, but 2016 for the stock unit is a long time ago in consumer electronics
    • Yea that’s why I said ima test them with multimeter and see the reads.
    • Only at idle. Isn’t a problem when rev it seems.
    • @Haggerty This seems silly to ask, but are you confident in your ability to tune the Haltech?  
    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
×
×
  • Create New...