Jump to content
SAU Community

Recommended Posts

17 minutes ago, Leroy Peterson said:

Need to paint the D1Rs black so no one can see them properly.
Theres that falcon on bags that was wrapped like an aqua green colour... White D1Rs spoiled it.
I also thought 18's were too small for gloria, but reducing tyre width made heaps of difference. Also good luck try to sell wheels without tyres. People too tight assed about it. Its like rego and selling cars.

True, they only Achilles but still pretty new / decent enough for now.

Dunno, some kid is keen af for the BBS's trying to get money together, maybe this will make it affordable :P 

Also birds those were Stance SC5's or what ever :P 

 

Here you go same car with your favourites

14466305_10154067074692499_424908004_o.j

 

Anywho, enough ford talk, lets talk about Mohsen. 

Edited by UNR33L
2 hours ago, Leroy Peterson said:

Anyone going to the drags Friday night? It's going to be mayhem mayhem mayhem

I don't understand driving in a straight line line line

6 hours ago, UNR33L said:

first ones i don't mind, but from the pics pretty much won't fit over the brakes.

I just tried on some of these at otr with the 9.5s on the front +30 clears brakes by a bees dick, only problem is cant get silver they can only get flat black. Still looks good though just need to decide if I want to go black again

 


These look shit house Leigh, apprentice across the road from me has them on his FG X XR6T and they look proper shit house. Don't do it!

12 hours ago, Rekin said:

HR rarely stuff up any annual leave / salary calculation. It's probably covered in some fine print in the contract.

 

12 hours ago, blah_blah said:

I'd say the opposite, unless you work for a big corporation.

I deal with many errors on a regular basis.

Most HR or book keepers have no idea of the tax law and Fair work entitlements in regards to staff entitlements

 

12 hours ago, Rekin said:

Transaction errors perhaps but I've found contractual calculations are usually accurate to the decimal point as they had to go thru approvals/legal/payroll etc

 

It's a minor error, but it's still there...

Standard working hours at that place used to be 9-5 with a 30 min unpaid lunchbreak, so a 7.5h/day = 37.5h week. Thus 20 days of Annual Leave would accrue at  (20d x 7.5h) / 52w = 2.88h/week

When workplace agreements were the thing to do (8 years ago) they drafted one up and change it to be a 38h week and made everyone work an extra 30 minutes on Wednesday evenings.

So since that time, the hours were 38/h week, which should have accrued at (20d x 7.6h) / 52w = 2.92h/week... but just looked at the payslips and although our hours were changed to 38, it was still accruing at the 37.5 rate. (They forgot to update it in MYOB 8 years ago)

Only noticed because in July this year they changed to Xero and I just spotted that the number is different to what it normally was.

So technically, they've shortchanged everyone... only a little bit of time per week... but for someone like me who has worked there for the entire 8 year period it adds up to about $700. (There are a few other staff that it would apply to as well, some at a higher hourly rate than I was on)

Same thing with accruing Sick Leave, but thats a moot point now.

Also, I had 5.5 hours of Time in Lieu which was "earnt" by getting up at 1am a few months back and fixing a major IT crisis as it unfolded... That didn't get paid out in my final pay, not sure of the legislation around that, can't find anything in the work place agreement so it should fall back to National Standards.

13423897_643436012477890_107009884822907

2 hours ago, Borci88 said:

Leroy how much you pay to enter?

$25 to spectate.

it sounded like it would be fun to watch. uleh's and old men getting competitive and racing each other for money. good to see some fast cars, but also cars break and maybe a punch-on. looks like its 1/8th mile (not sure if good thing?) and no timeslips, good ol' lights win.

and I think up to 200 people are allowed to spectate from the start line which is kind of cool.

 

It's a minor error, but it's still there...

Standard working hours at that place used to be 9-5 with a 30 min unpaid lunchbreak, so a 7.5h/day = 37.5h week. Thus 20 days of Annual Leave would accrue at  (20d x 7.5h) / 52w = 2.88h/week

When workplace agreements were the thing to do (8 years ago) they drafted one up and change it to be a 38h week and made everyone work an extra 30 minutes on Wednesday evenings.

So since that time, the hours were 38/h week, which should have accrued at (20d x 7.6h) / 52w = 2.92h/week... but just looked at the payslips and although our hours were changed to 38, it was still accruing at the 37.5 rate. (They forgot to update it in MYOB 8 years ago)

Only noticed because in July this year they changed to Xero and I just spotted that the number is different to what it normally was.

So technically, they've shortchanged everyone... only a little bit of time per week... but for someone like me who has worked there for the entire 8 year period it adds up to about $700. (There are a few other staff that it would apply to as well, some at a higher hourly rate than I was on)

Same thing with accruing Sick Leave, but thats a moot point now.

Also, I had 5.5 hours of Time in Lieu which was "earnt" by getting up at 1am a few months back and fixing a major IT crisis as it unfolded... That didn't get paid out in my final pay, not sure of the legislation around that, can't find anything in the work place agreement so it should fall back to National Standards.



You should start an office rumour about it
  • Like 1

Going to casually mention it to them if I do happen get called in over the next few weeks to help fixing their phone system which is currently broken... If I bring it up myself, I doubt I'll get called in if they think I'm just money grabbing

subtle salary suggestion there Simon

 

I assume they treated you well and leaving on good terms to not mention the variance

 

Otherwise why would you forgo the money with just a hey your calcs are wrong m8 

subtle salary suggestion there Simon



Shit you'd be doing well to calculate his salary from that info, particularly given the payrises/promotions over an 8 year period
6 minutes ago, joeyjoejoejuniorshabadoo said:

 


Shit you'd be doing well to calculate his salary from that info, particularly given the payrises/promotions over an 8 year period

 

Easy

Annual leave is paid at the current hourly rate, you dont need to know his payrate during the 8 year period only the end

  • Like 1
13 hours ago, Borci88 said:


These look shit house Leigh, apprentice across the road from me has them on his FG X XR6T and they look proper shit house. Don't do it!

Got a pic? probably cos he has the 18s and 18s look shit on falcons.. so many people do it dunno why. 

Oh and FGX looks sheit too, wait is that a white one? 
Limited to wheels now with big front brakes :(

Edited by UNR33L
11 hours ago, Odium said:

Also, I had 5.5 hours of Time in Lieu which was "earnt" by getting up at 1am a few months back and fixing a major IT crisis as it unfolded... That didn't get paid out in my final pay, not sure of the legislation around that, can't find anything in the work place agreement so it should fall back to National Standards.

Yes I had 100 hours TIL and got paid out at last place, you should be able to fight it but for 5.5 hours probably not worth it 

Easy

Annual leave is paid at the current hourly rate, you dont need to know his payrate during the 8 year period only the end



Oh yeah... Forgot about that lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
×
×
  • Create New...