Jump to content
SAU Community

Recommended Posts

12 hours ago, dezz said:

IT kunce, does this VPN stuff work, and if so, what's a good one to use... Criterion - effective, easy to set up, not a rip off.

Another popular one is tunnel bear

11 hours ago, emts said:

apparently, I've only played with the android one as I only use it on my tablet

but there is a windows one as well.

 

assuming it the same as the android one it just a matter of install and enter user name and password

 

https://www.ipvanish.com/vpn-setup/

 

 

Martin knows his shit so this will be just as good / maybe better 

11 hours ago, dezz said:

I pretty much only want it for downloading torrents... Keep seeing the ads on kickass/pirate bay etc... Been downloading torrents as normal without giving a f**k, but if it's only a couple $ a month to avoid any potential bullshit later then why not..

Express VPN seems to be the highest rated? $8.32/mnth for 12 months...

But do I then need to use something else to download torrents or do I just download through utorrent as normal?

Yep, VPN basically 'tunnels' you over to another network and acts like you're working / downloading from that location or network. 

I'd be trialing and making sure you get good speeds, the biggest downfall with these VPN services (mainly the free ones) is it slows your speed right down, Martin mentioned 50mbps if that's true then you'll be fine. 

Took car to suspension place, for front suspension being  abit crashy.

Advise is to replace entire coilover system, entire rear subframe, both rear wheel bearings and lockout bars galore - None of which they are willing to take on for any amount of money.

Good times.

13 minutes ago, Kinkstaah said:

Took car to suspension place, for front suspension being  abit crashy.

Advise is to replace entire coilover system, entire rear subframe, both rear wheel bearings and lockout bars galore - None of which they are willing to take on for any amount of money.

Good times.

Why didn't the Haltech alert you to this before it was an issue?

  • Like 1
1 minute ago, joeyjoejoejuniorshabadoo said:

Why didn't the Haltech alert you to this before it was an issue?

Didn't buy the optional suspension is f**ked sensor

16 minutes ago, Birds said:

I don't wanna curse Brett with your penchant for disaster, but maybe take it to Shockworks?

I thought about this but I was under the impression the setup I had was great. Certainly felt fine, though wanted to see what the Shockworks R34 felt like. I suspected nothing was even wrong with the rear end actually. Just thought the front was hitting the stops a bit too eagerly and was a little low.

But nope, apparently the rear is so bad it'd be 'suicidal' to drive it. I'd really rather not pay $5k to get it into an approved setup lol.

16 minutes ago, Kinkstaah said:

I thought about this but I was under the impression the setup I had was great. Certainly felt fine, though wanted to see what the Shockworks R34 felt like. I suspected nothing was even wrong with the rear end actually. Just thought the front was hitting the stops a bit too eagerly and was a little low.

But nope, apparently the rear is so bad it'd be 'suicidal' to drive it. I'd really rather not pay $5k to get it into an approved setup lol.

They just did a coilover swap on my GTS-T and the cost was very reasonable, so I guess if it's something inevitable for you, that would be a good starting point.

To be fair if I do go the whole hog and replace shocks and springs I would consider Shockworks or MCA really as the only two options to choose from. I may get away with a new set of coils, hicas lock bars and toe arms to suit, and two rear wheel bearings.

Still somewhat shit when my initial complaint to get checked out was "hm, the front seems to be pretty happy to hit bump stops and isn't low"..

Can anyone actually recommend a suspension place that won't go "Oh it's a sedan, I see your money and your questions are beneath me and please stop lowering the property value of my amazing shop"?

as this happens quite a lot

1 hour ago, Kinkstaah said:

Took car to suspension place, for front suspension being  abit crashy.

Advise is to replace entire coilover system, entire rear subframe, both rear wheel bearings and lockout bars galore - None of which they are willing to take on for any amount of money.

Good times.

werent you trying to convince me to buy it?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...