Jump to content
SAU Community

Recommended Posts

1 hour ago, Birds said:

Replica*

not just a replica a true replica, like that's almost the same thing.

 

"now you can get hold of a true Replica....The closest you can get to the real thing"

 

Another improvement over a crappy real one is made from steel, not crappy lightweight materials like an original one.

"The vehicle is made of steel..... so it doesn’t squeak and rattle."

 

 

If you want a good time to sell and buy back in later for an increased stake or some short term profit, now would be it while the stock is peaking. Everyone is taking their positions now and short term traders and opportunists unfamiliar with the company are jumping on board for the ride. A steady fall is IMO inevitable post-spud. Reasoning:

What you're seeing now with 88E is a perfect example of irrational shareholder behaviour - nothing new has been announced that hasn't been expected - everything is going to plan. How do we explain the 15%+ rise over the last week or two? Insider information is virtually impossible - the well hasn't been spud yet, so no new oil-based information available. Drilling permits being approved and the rig set up + FB posts are the only real news, but these were expected all along - did people expect hiccups? I put it down to people viewing the well spud as a major event rather than a mere milestone and taking their positions in the company before the big expected rise that comes post-drill (depending on the outcome of the drill, of course). However...there is a lot of time between spudding a well, drilling, testing and delivery of results - weeks to months, and it's here that I think it will sink back down if it doesn't find a new floor.

I recently sold at 4.4 thinking we would fall before or not long after spud, as I thought the rise from 4 cents to 4.4 was the above event taking place...got the timing on this wrong and didn't expect it to draw out to 4.8 cents, but I still exited with some profit (yay). Only cut that I missed out on another $1000 if I'd held and sold now - perfect trade hindsight. I'm both hoping and expecting that we'll see a fall post spud for reasons above. I'm doubting a new floor will be created at just under 5 cents - but who knows - it could be bolstered by media reports of the drill, creating further interest in the project. Really, the only safe way is to stay in and ignore the fluctuations.

If you want to know what happened historically with the last well (not all wells are the same, as last time was exploratory and this is more analysis) - the share price climbed to 1.8 cents thereabouts just prior to spud. It then dropped to 0.6 cents while we were drilling, due to a lack of news; people not understanding the reports when there was news; some probably expecting oil to gush out of the ground like in the movies. Weeks later the test results of samples came in positive and the share price shot up to over 4 cents and eventually 8 cents where some people made lots of money - that's where, if you're in it for the long term, buying or selling now isn't a huge deal as long as you're in it, because if the share price ever gets to $1 you sure won't be squabbling over 0.4 of a cent.

tl;dr: stay in this if you have balls, sell out and buy back in soon if you have bigger balls.

I'll probably sell a small packet next week depending on where things are at. Will keep most until results. Otherwise the money sits in a savings account generating f**k all interest. Might as well make it work for me towards 12months ownership for dat tax-less muns. August is only a few months away and expected results are due before that.

47 minutes ago, Leroy Peterson said:

I'll probably sell a small packet next week depending on where things are at. Will keep most until results. Otherwise the money sits in a savings account generating f**k all interest. Might as well make it work for me towards 12months ownership for dat tax-less muns. August is only a few months away and expected results are due before that.

I buy and sell so often that a 12 month CGT discount is a fantasy...I decided long ago I'm better off making up the discount in profits instead lol

Going to be awesome and shit at the same time if SP ever R eaches $1. Probably leave it in there for dividends. The best case scenario is someone buys out the company and pays you for your shares, leaving you with no choice and no ragrets.

I wouldnt mind a farmout/payout.

At $1 a share I could almost get a deposit to buy a house in a respectable suburb :O but f**k that, pulsar would get handballed to a workshop to finish 100%. Motivation at an all time low. Use the leftover cash to sit there and do nothing.

#boringbutsavvy #onlycountcashthatsinyourpocket

  • Like 1
2 hours ago, Leroy Peterson said:

I wouldnt mind a farmout/payout.

At $1 a share I could almost get a deposit to buy a house in a respectable suburb :O but f**k that, pulsar would get handballed to a workshop to finish 100%. Motivation at an all time low. Use the leftover cash to sit there and do nothing.

#boringbutsavvy #onlycountcashthatsinyourpocket

At $1 a share I'll buy a house with cash. $1 sounds like a bit of a dream, but hey, when the share price was 0.6 cents none of us imagined it getting to 8 cents...and that's without turning a single dollar of profit over, just mere speculation based on reports. When/if the oil comes gushing and the JV/farmouts are on the table, the multiplication of SP will be exponentially more and the market won't dictate the shareprice - assets alone will. Oil discovery is the kind of thing that can turn a million dollar company into a multi-billion dollar one and when you do the maths on hypothetical scenarios, $1 is quite conservative. Fortescue Metals is my analogy and my dream...

There are certainly worse things you can throw some savings at.

Just now, dezz said:

What's this discount you speak of... Pretty sure I've had my shares losing money for 12 months or close to by now.

At $1 a share I'll pay cash for a nice place in Toorak

In the unlikely chance you ever make money off 88E, when you sell you'll only pay half the capital gains tax on your profits.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...