Jump to content
SAU Community

Recommended Posts

7 hours ago, TiTAN said:

 


So a massive gate and massive sliding/folding glass doors across the whole back of the place?

It seems like a fine stage from which to show off your efforts in the gym, at least thats the first reason you would want it that comes to mind.

 

you_got_me_breaking_bad.gif

24 minutes ago, emts said:

small side garden I see to work on.

 

the empty lot next door is that part of the park or will some-one build on it? 

Park - only have one neighbour.

first home buyers duty reduction. you get 50% off if it your primary place of residence.

 

if you put the full 80% down them you don;t need to pay loan mortgage insurance.

 

simples

 

 

You mean 20%

 

If you put down 80% up front on your first house you have done well.

 

Going 20% deposit also gets you lower interest rates on top of not having to pay mortgage insurance.

3 minutes ago, TiTAN said:

 

You mean 20%

 

If you put down 80% up front on your first house you have done well.

 

Going 20% deposit also gets you lower interest rates on top of not having to pay mortgage insurance.

With this I got the NAB first home buyer rate which is apparently the best in the market right now - fixed for two years. Also get about $1800 worth of shopping vouchers.

Oh shiiiit

Don't tell him/her that you earned the money with CSGO skins

 

I prefer independent jewellers (bcoz hipster) because the people and artists actually know what they're doing, and they have no reason to lie to you, the items do all the talking so to speak. It's not just a spec sheet.

 

I've used e.g. etal in the CBD a couple of times. More designer stuff, but guaranteed unique and brownie points for the wimminz (compliments and envy galore amongst peers). Also got quality custom necklace from Ralf Finch in The Basin (chose a design, picked necklace and got to choose the pearls to use).

 

Edit: diamond earrings is a tough choice. Easily lost, small, mostly are studs so super subtle.

 

 

 

3 minutes ago, Leroy Peterson said:

Oh shiiiit
Don't tell him/her that you earned the money with CSGO skins

I prefer independent jewellers (bcoz hipster) because the people and artists actually know what they're doing, and they have no reason to lie to you, the items do all the talking so to speak. It's not just a spec sheet.

I've used e.g. etal in the CBD a couple of times. More designer stuff, but guaranteed unique and brownie points for the wimminz (compliments and envy galore amongst peers). Also got quality custom earrings from Ralf Finch in The Basin (chose a design, picked necklace and got to choose the pearls to use).

"Pearl necklace" sure sure 

Ok cool so there's no decent online shop gotta get off my ass and go somewhere? 

Mortgage insurance is proportional to your LVR and there's a law of diminishing returns to it, which starts to get awfully shitty when borrowing at high LVRs.

Here's a good example - you have 70k saved up as a first home buyer, it could be allocated as such:

A. 600k property, 5% deposit of 30k, LMI of 26k, stamp duty 15k = initial upfront of ~70k and your LVR is 95% on 570k borrowed

B. 500k property, 10% deposit of 50k, LMI of 9k, stamp duty 11k = initial upfront of ~71k and your LVR is 90% on 450k borrowed

So whilst 100k difference between the purchase price of the two places, the more expensive one actually requires you to borrow 120k more due to money spent on LMI (and some for the extra stamp duty).

One loophole you could use to avoid this - get a relative to borrow and "gift" you enough to make up a 20% deposit and cover the stamp duty - you finance the other 80% = no mortgage insurance and you just service both loans. Or they can go guarantor on the loan and you technically don't need any deposit or LMI.

With this I got the NAB first home buyer rate which is apparently the best in the market right now - fixed for two years. Also get about $1800 worth of shopping vouchers.

 

I'm on 3.81% at the moment, zero annual fees.

 

Looks like the comparison rate for that 3.69% deal is 4.38%

 

Pretty sure ubank and loans.com.au are still the actual comparable cheapest as they have no annual fees on their variable rate loans, with a once off few hundred $$ fee if you want to go fixed rate. But you have to have minimum 20% deposit to get those deals.

1 hour ago, UNR33L said:

Where's a good place to buy some diamond earrings? 

Don't mind spending a bit but not stupid amounts, birthday present.

 

Inb4 subtle, VWL6fig, 800k etc.

http://www.bbc.com/news/world-europe-39943470

48 minutes ago, TiTAN said:

Il stick with my pay less interest and fees In the long run than get some vouchers up front plan.

We comparing our loans or what was available to me at the time?

8 minutes ago, TiTAN said:

 


It was available to you too? You said you went in on 20% or more deposit?

 

Talking about the rate; I have no idea when you obtained a loan.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
×
×
  • Create New...