Jump to content
SAU Community

What Is The Safest Way To Purchase A Car Interstate


Recommended Posts

Hi, i am looking to purchase an R34 GTR located in Perth and bring it down to Melbourne but i do not know how to. i am also concerned on how i could trust the seller to hand over the car to the transporting company if i do purchase it. Opinions please, what would you guys do?

You're buying an expensive car, so...

1. Find some reputable performance workshops nearby the the cars location, call them up and ask if they'd do a pre-purchase inspection for you.

2. Ask the seller if you can take the car for a pre-purchase inspection, if they say no. Walk away, it's not the car you want.

3. FLY up there, we're not talking about a $3000 R32 GTST, spend $500 on a weekend trip to go see the car in person... Drive it, get the pre purchase inspection done.

4. Once happy, go into your bank and get a bank cheque drawn up (make sure they're open on the days your planning on buying)

5. Make sure all the paperwork is in order before you leave, you don't want to be missing an interstate signature.

6. Deliver the car yourself to the car transport place. Taking plenty of pictures of the car out the front of the facility, to prove any damage that could be caused.

7. Hire security guards if it is going to be travelling through NSW at all... I hear they've got a problem with non-34R owners getting jealous.

  • Like 8

You're buying an expensive car, so...

1. Find some reputable performance workshops nearby the the cars location, call them up and ask if they'd do a pre-purchase inspection for you.

2. Ask the seller if you can take the car for a pre-purchase inspection, if they say no. Walk away, it's not the car you want.

3. FLY up there, we're not talking about a $3000 R32 GTST, spend $500 on a weekend trip to go see the car in person... Drive it, get the pre purchase inspection done.

4. Once happy, go into your bank and get a bank cheque drawn up (make sure they're open on the days your planning on buying)

5. Make sure all the paperwork is in order before you leave, you don't want to be missing an interstate signature.

6. Deliver the car yourself to the car transport place. Taking plenty of pictures of the car out the front of the facility, to prove any damage that could be caused.

7. Hire security guards if it is going to be travelling through NSW at all... I hear they've got a problem with non-34R owners getting jealous.

Hahahahhahahah

Pretty much what Simon said. If you're planning on buying the car if it turns out to be everything you expect it to, nothing short of a few grand worth of insurance measures is a waste of money on making sure it's what you want.

But if I can add some advice from my experience: stay there for a week to view the car and get the transport sorted. Also, book transport and insurance before you even look at the car - some transport companies don't need payment upfront and most insurance companies will do a cover note for transport.

My story (shortened): I flew up to Canberra to buy/pick up my GTR and I pulled off what can only be described as a miracle with the help of the seller who went out of his way to help me (someone else may not). Landed in Canberra with bank cheque, met seller who picked me up, looked like a gangster / stand over man, felt like if I didn't buy the car off him I wasn't gonna see Melbourne again (nicest guy ever though, and was a public servant lol). Inspected car, liked it (still kinda scared of him), handed over bank cheque. Go to book car transport - most of them told me they needed 24-48 hours notice before they could accept the car. f**k. After a couple hours of ringing around and waiting on hold, one company out of all of them managed to take my booking on the spot and let me take it to the depot (which was actually the same depot of a company who knocked me back with the 24 hour shit; the guys I ended up booking through were just a front for them who tacked on their middle man profit; go figure). No complaints though, cause I had transport (or so I thought) and it was only 3 hours until I was due to fly back home. Didn't wanna leave seller with bank cheque and the car, even though he offered to take it there the next day for me with the other transport companies.

Got tow truck to take the car to the depot. They came out and looked at it. Put a wheel under the car and said too low (minimum height needed to be 15cm!??!!). GTR was about 10-11cm so they said can't take it. My plane trip back home was due to leave in 2 hours, so it was either miss the flight and stay overnight to fix or find a workshop who can help me raise the coilovers - in the space of an hour. Found only workshop in area - all hoists full. Borrowed a jack off them - no C spanners to raise coil overs, attempted using screwdriver and hammer. Not working, too slow, may not even be that much travel in suspension. Rip off front lip and brake ducts - 6cm cleared there. Left rare front lip in Canberra :( Deflated front tyres a bit and overinflated rear tyres. 15cm clearance achieved. 1 hour until flight. Get car to transport mob, plead with them to take it and I'll even sign a form to indemnify them of damage to the car during transport (I was over this shit by now, having spent 8 hours fking around). Car cleared all good. Seller drove me to airport (don't judge a book, dude was a legend - was with me all day instead of looking after his kids). Fly home heart pumping and thanking my luck.

And yes that was the short version cause more shit happened!

tl;dr / Moral of the story is, you can never plan too much. Book EVERYTHING beforehand and plan to stay there longer than a day in case you have to. Also check the car height and that the transport company can accept the car etc. It's seriously a miracle that I got my car back to Melbourne. If it had a functioning engine I would have driven it home to save the fk around. Getting it registered was another miracle, but that's another story for another day!

:cheers:

  • Like 2

Yeah ground clearance. Tell me about it. Most transport companies have a minimum of 15cm.

Bought a GT-R in Sydney and could only find one company that would transport it to Melbourne as it is 12.5cm at the lowest point. Similar to Birds experience, I still had to indemnify them wrt potential damage.

  • Like 1

On the plus side of interstate buying - you're already miles ahead of people who are scared / cbf doing the travelling you're doing. There's real bargains to be had and to assume the best of the lot can be found in your own state is an arrogant gamble :)

Extending the search Australia wide is the best hope of finding your perfect vehicle. There's nothing dodgy about interstate cars; you're really in the same position you are when you buy locally...just with a plane ticket, a schedule and a transport company. The rest is the same but 6 times more chance of finding a great car :D

Thanks for the advice guys. Unfortunately i cannot afford to be taking any more than the weekend off to look at this car so that leaves me with a really tight schedule. I am also unsure on booking a Transport company prior to looking at the car considering the tight schedule i have and my decision on buying the car (right now my decision is 50/50 as i have only seen photos of the car and it may not be to my liking in person).

Hi, i am looking to purchase an R34 GTR located in Perth and bring it down to Melbourne but i do not know how to. i am also concerned on how i could trust the seller to hand over the car to the transporting company if i do purchase it. Opinions please, what would you guys do?

I used CEVA to transport my skyline from Perth to Melbourne, no problems. You can track it online throughout the journey too.

Thanks for the advice guys. Unfortunately i cannot afford to be taking any more than the weekend off to look at this car so that leaves me with a really tight schedule. I am also unsure on booking a Transport company prior to looking at the car considering the tight schedule i have and my decision on buying the car (right now my decision is 50/50 as i have only seen photos of the car and it may not be to my liking in person).

To buy a car interstate, or to wanna spend $700 on flights to Perth, I'd want to be 90/10 about the car and that 10% is merely you checking to see if there are any scratches that weren't in pictures or any obvious mechanical issues.

  • Like 1

Pretty much what Simon said. If you're planning on buying the car if it turns out to be everything you expect it to, nothing short of a few grand worth of insurance measures is a waste of money on making sure it's what you want.

But if I can add some advice from my experience: stay there for a week to view the car and get the transport sorted. Also, book transport and insurance before you even look at the car - some transport companies don't need payment upfront and most insurance companies will do a cover note for transport.

My story (shortened): I flew up to Canberra to buy/pick up my GTR and I pulled off what can only be described as a miracle with the help of the seller who went out of his way to help me (someone else may not). Landed in Canberra with bank cheque, met seller who picked me up, looked like a gangster / stand over man, felt like if I didn't buy the car off him I wasn't gonna see Melbourne again (nicest guy ever though, and was a public servant lol). Inspected car, liked it (still kinda scared of him), handed over bank cheque. Go to book car transport - most of them told me they needed 24-48 hours notice before they could accept the car. f**k. After a couple hours of ringing around and waiting on hold, one company out of all of them managed to take my booking on the spot and let me take it to the depot (which was actually the same depot of a company who knocked me back with the 24 hour shit; the guys I ended up booking through were just a front for them who tacked on their middle man profit; go figure). No complaints though, cause I had transport (or so I thought) and it was only 3 hours until I was due to fly back home. Didn't wanna leave seller with bank cheque and the car, even though he offered to take it there the next day for me with the other transport companies.

Got tow truck to take the car to the depot. They came out and looked at it. Put a wheel under the car and said too low (minimum height needed to be 15cm!??!!). GTR was about 10-11cm so they said can't take it. My plane trip back home was due to leave in 2 hours, so it was either miss the flight and stay overnight to fix or find a workshop who can help me raise the coilovers - in the space of an hour. Found only workshop in area - all hoists full. Borrowed a jack off them - no C spanners to raise coil overs, attempted using screwdriver and hammer. Not working, too slow, may not even be that much travel in suspension. Rip off front lip and brake ducts - 6cm cleared there. Left rare front lip in Canberra :( Deflated front tyres a bit and overinflated rear tyres. 15cm clearance achieved. 1 hour until flight. Get car to transport mob, plead with them to take it and I'll even sign a form to indemnify them of damage to the car during transport (I was over this shit by now, having spent 8 hours fking around). Car cleared all good. Seller drove me to airport (don't judge a book, dude was a legend - was with me all day instead of looking after his kids). Fly home heart pumping and thanking my luck.

And yes that was the short version cause more shit happened!

tl;dr / Moral of the story is, you can never plan too much. Book EVERYTHING beforehand and plan to stay there longer than a day in case you have to. Also check the car height and that the transport company can accept the car etc. It's seriously a miracle that I got my car back to Melbourne. If it had a functioning engine I would have driven it home to save the fk around. Getting it registered was another miracle, but that's another story for another day!

:cheers:

i want the rest of the story. pull out your diary and get typing

I used PrixCar from Melb -> Perth. They transported it door-to-door. 15cm clearance a must. No issues. Happy :)

I then used a different company from Perth -> Melb. I drove it to depot & had it delivered to premise.

The truck driver unloaded the car down the street & drove it to my premise...Engine temp was also warm...

Not only that, there was a scuff mark on the door (probably from another car door) which they did not admit to.

no doubt took it for a joy-ride before pulling up on the driveway, didn't see him unloading as the truck was around the corner...

The above can happen with any transport company as it comes down to the individual moreso than the company.

Just make sure to take plenty of photos & be there when delivery occurs.

I had the car delivered without me present & hence the person accepting it was not confident to challenge any marks or unloading of vehicle.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...