Jump to content
SAU Community

Recommended Posts

I just wish they would also go for the drivers that piss around at 10klm UNDER the speed limit, How many times are you in a 60 zone with a boofhead doing 45 or 50, then it changes into a 50 zone and they do 55. They do it all the time up here (country town)

The best are the drongos that do 60 t0 70 in a 80 zone and get to an over taking lane and off they go to 90 :angry:

If you get booked for speeding you should also get book for holding traffic up :yes:

  • Like 1

Actually you can be booked for holding up traffic, they just don't seem to enforce it

Yes and Yes

Trouble is now if you overtake someone doing 90 in a 100 zone you must not go faster than 100. That does not work in most cases. Sometimes when they see you overtaking a lot will speed up and leave you hanging out there, then you have to back off and fall in behind them again :angry: or stamp on it and before you get by you could be doing 140ish +, goodbye license, maybe goodbye car ??

Back when I was younger I think the rule was or as I understood it ( before radar speed detectors) " wait till you have a clear section of the road and overtake as quickly as you can and pull back in to the lane and resume driving at the speed limit" this makes more sense. Maybe my memory just wants me to believe that was how it was, because that was what I did :woot:

  • Like 2

The more years I've gained on my licence I've learnt,

Pay extra attention on roads that have telegraph poles along them, if someone messes up and you're doing even the speed limit at 60km/h the end result is going to be very nasty. I'd never do silly things on a road like this, traffic or no traffic the risk is too great. If you have a car with 4 or 5 people in it, chances are 1 or more will die. Been in this situation many times when I was on my P's in my mate's cars thinking, ''Yep, I'm gonna die"

Also, people can't judge your speed properly if you're speeding and will pull in front of you, really it's not their fault as you should be doing the speed limit. I never carry a lot of speed through roundabouts now ever. Usually you have 1-1.5 secs to respond and pull the car up if someone miss judges your speed.

The only times I'd ever speed is if I've traveled the road many times, you pretty much know every crack and off cambers the road has, it was quiet and no traffic. Bendy roads I know people are going to be at a dead stop around the next blind corner. Highway on ramps or overtaking on the highway are probably the only times I'd have my foot to the floor.

So I guess I'll say yes it may be safe at times, but it's a very small window. Most of the time I'm scanning for peoples mistakes and just following the speed of the traffic, not getting into peoples blind spots for too long etc

Yes and Yes

Trouble is now if you overtake someone doing 90 in a 100 zone you must not go faster than 100. That does not work in most cases. Sometimes when they see you overtaking a lot will speed up and leave you hanging out there, then you have to back off and fall in behind them again :angry: or stamp on it and before you get by you could be doing 140ish +, goodbye license, maybe goodbye car ??

Back when I was younger I think the rule was or as I understood it ( before radar speed detectors) " wait till you have a clear section of the road and overtake as quickly as you can and pull back in to the lane and resume driving at the speed limit" this makes more sense. Maybe my memory just wants me to believe that was how it was, because that was what I did :woot:

don't know if it has changed, or just wasn't enforced, but it is illegal to go over the speed limit when overtaking as well.

I think this is a little dangerous in itself.

Someone doing 10 under, then you doing the speed limit, it's going to take a fair while to get past that person.

don't know if it has changed, or just wasn't enforced, but it is illegal to go over the speed limit when overtaking as well.

I think this is a little dangerous in itself.

Someone doing 10 under, then you doing the speed limit, it's going to take a fair while to get past that person.

Back when I am talking about the cops would have to be following you to get the speed you were doing, now they just use radar.

Frustration can get to you and if you were to stay at the speed limit when overtaking , you want to be sure there is a big gap between you and any cars coming the other way.

Most holding up traffic in a single lane gun it when the second lane appears, then resume doing 10-20 under the speed limit when the overtaking lane ends.

I know someone in a fast car that still overtakes the AH that guns it in this situation, gets infront of them and slows right down to let them see what it is like, feels so good, I would imagine, but road rage can be the end result, LOL

But this person does not do it anymore, he has mellowed a little :yes:

Actually you can be booked for holding up traffic, they just don't seem to enforce it

HWP friend has been instructed to use discretion in booking drivers for this. His base is Lawson so it's very rare that he'd implement this rule.

Mind you, he has done it. $119 fine and 2pts.

Should be more of it Terry, L platters excluded, maybe red Ps

Once I get to the stage I cannot drive at the speed indicated, it is time to hand my license in , would I do it , I do not honestly know , but it is getting to close for me, LOL

If it is not because you are old and your reflexes turning to mush, 1 warning, then book them :)

Trouble is, those overtaken drivers don't have a clue that they're speeding up.

Their lack of spatial awareness is clear by their poor skills when back on single carriageway, can't cope at the posted speeds.

Even cruise control doesn't help them, they give it a squirt at the start of an overtaking lane and then at the end their cruise resumes plodding along.

You can smell the fuel from the overloaded cat, always an indication someone has the foot hard down.

I've noticed these aces also crap themselves at the "end of passing lane 500m" sign and immediately swing out into the right hand lane, shortening the designed overtaking distance considerably.

There's enough room after that sign for a couple of "B" doubles to overtake but these inconsiderate drivers simply don't have any skills.

I know someone in a fast car that still overtakes the AH that guns it in this situation, gets infront of them and slows right down to let them see what it is like, feels so good…..

  • Like 2

When I get to an overtaking lane and the person in front has been dordling along 10 to 20 klms under the limit, there is no chance of smelling anything coming out of the back of a car that has had me pinned down for 5 to 20 klm and he had better have a rocket up his arse to stop me getting in front of him/her :yes:

That is safe speeding , stops me wanting to kill the prick :action-smiley-069:

  • Like 2

Another example of today's poor driver is at the school speed zones.

We have mostly 100 highway speeds and then a small country school will pop up with a 60 or 80 zone.

Really feel for truck drivers having to brake hard and then get it all rolling again simply because some clown doesn't know the day of the week.

School's out, it's Sunday, read the bloody signs.

I just pass when I think is safe. f**k the lines.

I rule.

I find it easy to stick with the lines, apart from the Tiida my cars have always had enough grunt to slid by easily.

Ever notice it is a good hiding place for the HP when a straight stretch of road hits double lines , they used to love it down the National park road to the Gong , not sure what it is like nowadays ?

But a few have closed and are gone forever.

People complain about the noise (the same people who are the first to say take it off the streets).

I don't understand why the tracks aren't better backed(government) to help get speeding of the streets.

No, they generally of the camp of "just don't own a performance car"

I only ever felt out of control driving a car one time, very briefly. Lift off oversteer in a 97 pulsar, on a road that I have driven 1000 times. Wasn't very familiar with the car and was pushing quite hard. I was never in a position that I was going to kill anyone however.

There is a time and a place for everything, even speeding.

Re: outdated speed limits, yes, in nearly all cases they are very outdated, but what some do not consider is that there is a metric shittonne more cars on the road now. And retards. Stack more retards. And they are breeding.

I commute nearly 50kms each way every day on a moto and see heaps of them. I saw a guy brushing his teeth while driving a few weeks ago. That was a new one. Mobile foneing both text and talk, newspapers, makeup, eating breakfast, searching for something in the back. I see all of these things nearly every day.

People just need to focus on the task of not running into anything, everything else (keeping eyes attached to the speedo included) can wait.

Edit: I am 35

Edited by MagicMikeZ32
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
    • Literally looks like direct port nitrous haha
×
×
  • Create New...