Jump to content
SAU Community

Recommended Posts

Hi Kustom20.   I have purchased some GTR radiator top support brackets from you around five weeks ago.  I haven't been able to contact you via Twitter, the only means of contact I have for you. I understand now you have had some IT issues? Can you  please e mail me with an update as to when I can expect my brackets I have purchased.  [email protected].  Thanks 

I've emailed them a few times on the address given on their site but had nothing back from them...... I'm going to give them the benefit of the doubt and give things to the end of the month, if I've heard nothing by then I'm just going to reclaim my money via PayPal 

  • 2 weeks later...
  • 5 weeks later...
  • 1 month later...

Paid for a custom R33 fuse box cover in Feb 2018... still no sign of my cover, they ignored all my attempts to contact them, then lost their domain. No idea what’s going on now but PayPal would not give me my money back either. AVOID

$247.50 AUD WASTED

2 hours ago, Keeper said:

Paid for a custom R33 fuse box cover in Feb 2018... still no sign of my cover, they ignored all my attempts to contact them, then lost their domain. No idea what’s going on now but PayPal would not give me my money back either. AVOID

$247.50 AUD WASTED

Why did PayPal refuse you? Screenshot your emails with kustom20 and present a solid appeal. I got 100% of my money back. 

I'll Crack open a cold one for ya. 

- Canadian guy

Edited by Sam62391
Typo
12 hours ago, Sam62391 said:

Why did PayPal refuse you? Screenshot your emails with kustom20 and present a solid appeal. I got 100% of my money back. 

I'll Crack open a cold one for ya. 

- Canadian guy

PayPal told me I waited to long to escalate it from escalated to some other status, closed my case with minimal warning and very poor wording then told me as the case was closed I had no right to appeal. 

I may not have a right to appeal, but I had a right to close my PayPal account and have done so. Anyway, that’s a different battle

  • 3 weeks later...
On 3/27/2018 at 1:50 AM, Kustom20 said:

Hi Guys,

You have every right to express your feedback and make comments, unfortunately we can't control things that are out of our hands from non-conforming product to freight delays or the unfortunate manufacturing quality issue and needing to fab the parts again. We always send our customers tracking details for each and every order - during the end of the year we always get busy with end of year events and also start of the year gets busy as we need the time off for our holidays. We express to our customers that there could be delays due to influx in orders and always maintain contact, having a small team here does also provide a challenge, whether it be personal or family issues, mental health or the unfortunate passing of friends and family members. SAU has helped me personally through so much more than any of you guys can imagine. And I thank you for this and we will do our very best on any current orders

Do you still do the GTR R35 badges ?

  • Confused 1
  • 1 month later...

Are they still missing? Odd since the website is still up and they have contact details.

I'd pay a lot of money for the GTT front and rear badges...

On 8/24/2018 at 11:33 AM, r32-25t said:

Have you not read the latest posts in this thread? They aren’t delivering the products and have gone missing with peoples money.

 

  • 1 month later...
On 6/13/2017 at 2:46 AM, Kustom20 said:

Hi Guys,

Was away over the long weekend, if you can shoot through email to me that would be great.

All stock has been picked up mid last week for the CAS Covers, I just need to run the sample off and get some images back to you guys.

Also got these made but forgot to post the images, a happy customer in Netherlands ordered 2 and sent me images when he fitted one on his car.

kustom20_custom_cnc_billet_gtst_gts-t_badge_decal_logo_emblem_mirror_polished_milling_machining_parts_supplier_r32_r33_r34_nissan_skyline.jpg.10b2338ff1aaddbc3c4291839d7b4e28.jpg

kustom20_custom_cnc_machining_milling_billet_aluminium_vehicle_parts_aftermarket_gts-t_gtst_gt_gtr_r32_r33_r34_nissan_skyline_badge_decal_emblem_logo_gtt.jpg.23185cd1e4fe8658961c6b8452a77822.jpg

 

These are unique

Anyone have GTT boot and grill badges willing to sell?
Hi bro, when they were up and running i brought 2 lots... rear badge, side gaurd badges but i didn't get any front grill gadges.. if you interested i have a spare set in carbon look i might sell?? Cheers mate just let me know as they will go quick.. for some reason i cant put pic up so pm me your mobile and i can send ya a pic...
1 hour ago, mick-r34gtt- said:
On 12/4/2018 at 6:42 AM, Sam62391 said:
Anyone have GTT boot and grill badges willing to sell?

Hi bro, when they were up and running i brought 2 lots... rear badge, side gaurd badges but i didn't get any front grill gadges.. if you interested i have a spare set in carbon look i might sell?? Cheers mate just let me know as they will go quick.. for some reason i cant put pic up so pm me your mobile and i can send ya a pic...

I too would like to see how these look. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
    • Car has been running great, I've put about 300km's of break in time on it. First thing that stands out with properly sealing rings is no more noticeable crankcase smell coming out of my catch can. This may seem insignificant, but the constant smell while driving around was infuriating. It's also nice to see my oil level remain stable. Two new issues have developed that I only noticed this weekend though. There's a very noticeable driveline vibration past 100kmh. I only noticed it now as I've been babying it under 100kmh in the backroads. This comes as no surprise as I'm running a one-piece shaft, and I paid zero attention to my driveshaft angle when I put everything back in. I also have a fair bit of voltage drop on hot starts. The starter audibly is forcing. No issues on cold start though. I must not have removed all the paint under my main block ground during assembly. I'll try and take care of both those issues this week once the kids are asleep.  I also received all the parts I was missing for my direct port setup. I will hopefully have pictures of that up soon. I'm hoping to get back on the dyno the week of June 30th as I'll be on vacation. I'm confident I should be able to make north of 500rwkw on pump gas and WMI. I'll go back again later this summer with E98, but I want to confirm my ethanol content sensor is working properly first. I've never seen it read anything but 11%. This makes sense for our 10% ethanol content pump gas here, but I would expect the occasional movement between fill ups. 
    • 75% complete. Will now need to get a new axle with 5x114.3 hubs and then figure out how to customize some mudguards for it once the wheels are on.
×
×
  • Create New...