Jump to content
SAU Community

Recommended Posts

Iv been scrambling through the forums to find my best turbo choice for my R33.

Im running a forged RB25 with pon cams mild head work N1 oil pump FMIC and other supporting mods like full exhaust head gasket bearings coil packs AFM apexi ECU etc.

I had a high mount with a T04z greedy FF plenum and was making 653HP at the rears untill i got flagged into a RBT and ended up with a canary and living 7 hours away from the closest emissions testing center makes is hard to engineer as i work 6 days a week aswell so im toning it down abit to make it streetable with no red and blue lights behind me.

Iv sold the FF plenum and the hotside setup but im wanting opinions on a smaller turbo choice but i still want awesome responce and i still want power up untill the 8k RPM..

Here is my choices im choosing from at the moment.

-GTX3071r

-Hiflow my STD turbo

-GTX3582r

What do you guys think of these choices and any other turbo options u guys think is suitable as im after about 250-300rwKW and trying to keep the engine looking standard as iv already been pulled over 3 times in a month since its bsck on the road lol.

Don

Edited by donburtron
Link to comment
https://www.sau.com.au/forums/topic/463591-turbo-options/
Share on other sites

Read the thread and I'm sure 100% of peeps with one is over the moon with theirs.

Not quite, but who's counting...

Unfortunately bagging a forum trader's product is not allowed no matter how many times you have issues with it, or how you are treated, so you will likely only see one side on here Grant.

Link to comment
https://www.sau.com.au/forums/topic/463591-turbo-options/#findComment-7697062
Share on other sites

Iv been scrambling through the forums to find my best turbo choice for my R33.

Im running a forged RB25 with pon cams mild head work N1 oil pump FMIC and other supporting mods like full exhaust head gasket bearings coil packs AFM apexi ECU etc.

I had a high mount with a T04z greedy FF plenum and was making 653HP at the rears untill i got flagged into a RBT and ended up with a canary and living 7 hours away from the closest emissions testing center makes is hard to engineer as i work 6 days a week aswell so im toning it down abit to make it streetable with no red and blue lights behind me.

Iv sold the FF plenum and the hotside setup but im wanting opinions on a smaller turbo choice but i still want awesome responce and i still want power up untill the 8k RPM..

Here is my choices im choosing from at the moment.

-GTX3071r

-Hiflow my STD turbo

-GTX3582r

What do you guys think of these choices and any other turbo options u guys think is suitable as im after about 250-300rwKW and trying to keep the engine looking standard as iv already been pulled over 3 times in a month since its bsck on the road lol.

Don

You are missing the GTX3076 there, I think the 71 may drop off a little in the top end, but a .82 rear on a 76 might be perfect, especially if you externally gate the turbo or stock manifold.

Are you planning to run e85? That would change things... The GTX3076 is good for 400kw on e85.

Link to comment
https://www.sau.com.au/forums/topic/463591-turbo-options/#findComment-7697064
Share on other sites

Not quite, but who's counting...

Unfortunately bagging a forum trader's product is not allowed no matter how many times you have issues with it, or how you are treated, so you will likely only see one side on here Grant.

That's why I said 100% :P

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/463591-turbo-options/#findComment-7697068
Share on other sites

You are missing the GTX3076 there, I think the 71 may drop off a little in the top end, but a .82 rear on a 76 might be perfect, especially if you externally gate the turbo or stock manifold.

Are you planning to run e85? That would change things... The GTX3076 is good for 400kw on e85.

Thanks scotty ill look into it.. i didnt look at it but i will check it out now..

My thoughts are the 3582r will be to laggy downlow and the 3076 sound good

What im aiming for is a response and power through to about 8k rpm.. the KW ill be happy with 250 even but im wanting 600-700nm out of it as iv had big HP cars but they are useless.. can only go 100kph and il love to leave anything behind up to the 200kph..

Link to comment
https://www.sau.com.au/forums/topic/463591-turbo-options/#findComment-7697077
Share on other sites

I've been a trader on this forum for 7 years and been recommended by many for good reasons. We don't compete on this forum through bagging out other traders.

For around 250rwkws application, high flow of factory turbocharger will do the job, it bolt up to factory spot, looks standard and that is more responsive then any of the GT30 or GT35 options. We have a big evaluation and discussion thread which covering different aspects of RB25det modifications as well as development in Rb turbochargers. Thread is indexed on page 1, and packed with member's results, feedbacks and options.

http://www.sau.com.au/forums/topic/261613-hypergear-hiflow-service-continued/


We move a good number of Garrett turbos, and will be able to supply at a very competitive pricing. For any of the GTX range apart from GTX3071 is not recommended as a responsive option or to run internal gate with. You are welcome to give us a call or send in a PM for recommendations and latest pricing.

Link to comment
https://www.sau.com.au/forums/topic/463591-turbo-options/#findComment-7697099
Share on other sites

I've been a trader on this forum for 7 years and been recommended by many for good reasons. We don't compete on this forum through bagging out other traders.

For around 250rwkws application, high flow of factory turbocharger will do the job, it bolt up to factory spot, looks standard and that is more responsive then any of the GT30 or GT35 options. We have a big evaluation and discussion thread which covering different aspects of RB25det modifications as well as development in Rb turbochargers. Thread is indexed on page 1, and packed with member's results, feedbacks and options.

http://www.sau.com.au/forums/topic/261613-hypergear-hiflow-service-continued/

We move a good number of Garrett turbos, and will be able to supply at a very competitive pricing. For any of the GTX range apart from GTX3071 is not recommended as a responsive option or to run internal gate with. You are welcome to give us a call or send in a PM for recommendations and latest pricing.

Ill give you a call tomorrow mate..

I dont want to run a external gate cause its more expense i have to fork out

Link to comment
https://www.sau.com.au/forums/topic/463591-turbo-options/#findComment-7697135
Share on other sites

You are missing the GTX3076 there, I think the 71 may drop off a little in the top end, but a .82 rear on a 76 might be perfect, especially if you externally gate the turbo or stock manifold.

Are you planning to run e85? That would change things... The GTX3076 is good for 400kw on e85.

Also missing the GTX3576 ... spool/response is nearly-ish the same as a GTX3076 but it will make more up top.

To find good comparisons, look on the NAISOC forums... heaps of testing back to back on GTX3076 vs. GTX3576

Link to comment
https://www.sau.com.au/forums/topic/463591-turbo-options/#findComment-7697348
Share on other sites

I'm using Hypergear's SS2 in a .82 rear with a Nissan front cover making 297rwkws at 20psi full boost by 3800rpm. factory appearance, and completely bolt on.

Does this require a spacer plate between the flange and do standard water lines bolt up?
Link to comment
https://www.sau.com.au/forums/topic/463591-turbo-options/#findComment-7697790
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...