Jump to content
SAU Community

Recommended Posts

The Barra engines are the go, only need to do internals if going 600+hp, they are a high torque motor and a lot of fun, power glide is definitely the go.

I have seen it done but can't remember the guys name.

Only real downside is it won't sound like an RB

Not only do they not sound like an RB. They sound like absolute dick.

Yep definitely don't have the same aggressive scream like RB and 2J its like the tone is stuck inbetween a 6 and 8, hate there sound but awesome performance.

Not only do they not sound like an RB. They sound like absolute dick.

Sounds like you have dicks in your ears.

Some of the comments in this thread are hilarious.

Take a look at a dyno sheet from a mildly tuned Barra 4 litre, and you'll soon realise why they would smack an rb25 like a redheaded step daughter. All while making peak power at about half the revs of the rb25, and hold it to redline.

Sounds like you have dicks in your ears.

Some of the comments in this thread are hilarious.

Take a look at a dyno sheet from a mildly tuned Barra 4 litre, and you'll soon realise why they would smack an rb25 like a redheaded step daughter. All while making peak power at about half the revs of the rb25, and hold it to redline.

dont let common sense get in the way of a good internet argument lol
  • Like 1

Sounds like you have dicks in your ears.

Some of the comments in this thread are hilarious.

Take a look at a dyno sheet from a mildly tuned Barra 4 litre, and you'll soon realise why they would smack an rb25 like a redheaded step daughter. All while making peak power at about half the revs of the rb25, and hold it to redline.

Interesting. I just got home from a cruise with some mates.

My mate with a tuned Barra got pissed on by an 34 tonight.

That's right, the guy in the 34 had time to stop, flop out is dick and piss on my mates car as he drove past.

Is that hilarious enough for you.

Because I find it bloody funny.

Edited by XGTRX

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...