Jump to content
SAU Community

Recommended Posts

1 hour ago, iruvyouskyrine said:

Do yourself a favour and don't use sparesbox.

I waited 10 months for mine to arrive and it was always coming 'next week'. Even getting my money back was a pain.

 

7 hours ago, burn4005 said:

Sparesbox have 20% off on eBay all the time but I'm not sure they actually can get their hands on them/have stock

Also sparesbox are pretty darn expensive, and seem to just jack up all their prices whenever they have a 'sale'.

  • Like 1
Do yourself a favour and don't use sparesbox.
I waited 10 months for mine to arrive and it was always coming 'next week'. Even getting my money back was a pain.


+1 for this.
Took them two n a half weeks to inform me that they were unable to get the exhaust system that I wanted which was marked as in stock on their website.
I asked a couple times what was happening and they just kept saying they were expecting it to turn up today
  • 2 weeks later...
On 9/16/2018 at 5:08 PM, VFRegal said:

One of the guys in Street Cars Class in WA.

7670, not nice !

 

Yes, that's mine - a 7670 on 23psi on a SR 2.2L pushing out some impressive numbers. Still waiting for an assessment of why the compressor shaft snapped after 1 dyno run and 1 and 1/2 laps at Barbagallo during a slow warm-up lap. I'm a big fan of the EFR and pretty impressed with my 9180 on an RB34 that's run faultlessly for 3 seasons+ of racing.

Forgot to mention that the 490kw was done with Bosch 1650s,
stock R34 fuel lines,
stock fuel rail
stock nissan filter
single in tank pump (pierburg l3lm at 17.5v and pwm control)
Aftermarket fuel hat
Diff Fuel pressure drops from 45 to 42psi from idle to redline with fixed pump speed but can be ramped in to keep it flat.

Pressure at pump outlet is probably much higher!

18 hours ago, Nissanmania said:

Yes, that's mine - a 7670 on 23psi on a SR 2.2L pushing out some impressive numbers. Still waiting for an assessment of why the compressor shaft snapped after 1 dyno run and 1 and 1/2 laps at Barbagallo during a slow warm-up lap. I'm a big fan of the EFR and pretty impressed with my 9180 on an RB34 that's run faultlessly for 3 seasons+ of racing.

Yes I follow your racing exploits on facebook. I have a 7163 in my s15 which is great but a little small for Barbagallo. I actually passed your s14 the other morning on the way to work. Was trailered up outside the deli/coffee shop in West Perth. I would be interested to find out why your 7670 let go.

18 hours ago, Nissanmania said:

Yes, that's mine - a 7670 on 23psi on a SR 2.2L pushing out some impressive numbers. Still waiting for an assessment of why the compressor shaft snapped after 1 dyno run and 1 and 1/2 laps at Barbagallo during a slow warm-up lap. I'm a big fan of the EFR and pretty impressed with my 9180 on an RB34 that's run faultlessly for 3 seasons+ of racing.

That's pretty unlucky with the 7670 :( Not something you hear happening, the few EFR failures I have heard of have been overspeed / turbine wheel related

9180 on a 3.4 sounds like a real hearty combination though! 

While there's some sr20 chat. I got mine re dynoed last week. Changes / upgrades and attempts to fix boost drop were:

Link g4+ ecu (controlling boost now)

New boost solenoid

map sensor instead of hpx afm

New iat sensor

Canbus wideband controller

New vct gear (old one was rattly)

new tomei 258 Poncam (maybe more ex flow)

 

Was pretty much better everywhere. More response. More power on less boost. Pretty fantastic result. My gen1 Walbro 416 fuel pump was maxing out so will probs change to the new 525 one and retune to smoothen things out.

 

Car also lasted about an hour before the original (260,000kms old) rocker arms snapped (two of them) so getting new ones out in and dual shim setup on them done this week to get her back on the road.

 

338rwkw and a really meaty midrange of about 260rwkw at 4k. Full boost at about 3800rpm.

 

Green is the final result. The 'shit' red one is the last 307rwkw with more boost in the mid but less power overall especially as tapering off.

Image (5)~2.jpg

Image (2)~2.jpg

  • Like 3
2 hours ago, R_34 said:

Awesome result !

A friend is thinking about stepping up on his SR. Can you give me  some details about your setup or point me to your topic where you present your setup.

Sure:
 - Forged engine, pistons, rings, rods. Head studs, main studs, nitto HG, stronger valve springs, RAS.
 - Full-race T4 TS Manifold (ewg but with the ewg ports blocked off with vband plates so I can use in future if I want)
 - BW EFR7163 0.80 TS. TS Bov. TS Dual port 24psi actuator
- Bosch 1650cc injectors in top feel rail. All braided lines, aftermarket fuel filter.
 - Havoc straight intake and 2.5" custom intercooler piping with new Aeroflow core
 - 3" vband dump to cat, resonator, muffler (3" all the way)
 - Link G4+ S15 plugin ECU
 - Walbro 416lph fuel pump direct wired to battery

That's about it for the turbo / engine / power setup.

I really love the result but alot of me would be hard pressed to recommend it given the cost and issues I've faced. When something like a new GTX2867R Gen2 will perform 90% as well in basically bolt on configuration with stock manifold etc..... certainly way less headaches.

  • Like 2
7 hours ago, MaximuSmurf said:

While there's some sr20 chat. I got mine re dynoed last week. Changes / upgrades and attempts to fix boost drop were:

Was pretty much better everywhere. More response. More power on less boost. Pretty fantastic result. My gen1 Walbro 416 fuel pump was maxing out so will probs change to the new 525 one and retune to smoothen things out.

338rwkw and a really meaty midrange of about 260rwkw at 4k. Full boost at about 3800rpm.

 

 

That's a really nice result!  Still having boost control issues, though?   The turbo should have more flow in it, which is a shame - but that is a massive delivery for an SR20!   How does it drive?

1 minute ago, Lithium said:

That's a really nice result!  Still having boost control issues, though?   The turbo should have more flow in it, which is a shame - but that is a massive delivery for an SR20!   How does it drive?

Thanks.

And not 'really'. Line is a little wavy but pretty flat holding ~25psi the whole time now. Internal gate is always a little tougher to manage but I'm trying to squeeze the best result out I can before going external gate. Just because $$$ and legality here in Vic (not sure who I'm kidding about legality after going high mount).

Drives really really well. It's my daily driver so just putting around town and the streets is great. Beautiful torque and pull down low. You REALLY use that BW transient as you can come off/on throttle and it's quite effortless to get moving again. It does break traction in the dry in a straight line in 3rd now... soooo.... I'll do new subframe/diff bushes and some rear suspension arms in the hope of providing a little more rear grip, if that doesn't work I might run a little less boost just to make it a little less of a handful.

Not tooooo sure why I'm getting such a huge power drop after 6000rpm, maybe the cams are just too small. But to be honest I'm not that fussed, just want to be driving the car now. Will probs drop the RPM limit a bit for safety to prevent me snapping anymore rockers and see how she goes.

Ideally I'll start putting some $$$ away to chuck a P12 head on in future which will fix me having to replace VCT gears and hopefully stop the cam bottleneck (if that's what it is).

1 minute ago, Lithium said:

I had guessed that the power rolling over may have been partly necessity to avoid leaning out with the fuel pump starting to max out?

I'm not sure. Unfortunately I wasn't there when the tuner was finishing up so I didn't get a huge amount of details about some of those little niggles. Will go back for a touch up with the new bigger fuel pump in and see if that helps smooth anything out.

 

here is my dyno log over the 8374 compressor map. the 8374 is a pretty good match for an rb26.

 

I've moved the air flow scale slightly to make the turbo speed lines line up better. I would also expect the pressure ratio to be slightly higher due to air filter and intercooler pressure drop. I'm just using MAP here. you can see why they snap on so hard, it goes right through the peak efficiency zone when it's spooling.

image.thumb.png.356ec6191934f57343d820badde90a33.png

Edited by burn4005
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • PayPal is a safe, online payment system that enables businesses and individuals to safely send and receive money, making it an indispensable tool in both personal and professional contexts. However, many users wonder how to send money on PayPal? Don't be alarmed if PayPal is new to you - all the steps can be found by visiting merchant sites with links marked "Pay or send money". Once clicked, select payment method, amount, and add message or note for recipient(s). Upon successful transaction completion you will receive an email containing details of transaction. Let’s start by understanding how PayPal works, how money transfers from banks to PayPal and using various payment methods. Moreover, to transfer money between PayPal and bank, head to the Wallet section and click "Add Account", selecting either "Transfer within seconds with debit" or "Transfer between 3-5 days with bank", and following any instructions shown on screen until completed successfully.   How to Send Money Over PayPal: The Basics Before sending money through PayPal, first create an account. Here is how to set-up a PayPal account: ·         Click “Sign Up” on either the PayPal website or app to enter your basic information such as email address or name into their system. ·         Link your bank account, debit card or credit card directly with PayPal so you can fund transactions directly using these accounts. ·         Verifying your PayPal account will enable you to send and receive more funds. Typically, PayPal requires that you verify your credit card or bank account by making small deposits into it. ·         Once your PayPal account has been established, you can send money through it.   How Do I Send Money to Someone on PayPal? After creating a PayPal account, you can easily send money through it. Here is how to send money to someone on PayPal: ·         First of all log into your PayPal account ·         Once on your dashboard, click on "Send & Request Tab." ·         After this enter the recipient's email or mobile phone number. ·         Enter the amount you wish to send to someone. ·         At last, recheck all the details and click "Send Payment" to complete your transaction if everything looks in order.   How Can I Send Money PayPal for Goods and Services? PayPal provides a safe method for individuals and businesses alike to transfer funds online, both personally and commercially. When paying for goods or services there are additional protections in place both for buyers and sellers. PayPal Buyer Protection offers you peace of mind when paying for products or services with PayPal. In the unlikely event that there is an issue with a transaction, if there are any discrepancies you may dispute it and be eligible for a possible refund. You need to follow the same steps to send money, but select Paying for Services or Goods when prompted. In fact, this extra layer of protection will keep your account safe from fraudulent attacks.   How to Transfer Money to PayPal from Bank? Here is how to transfer money from PayPal from bank: ·         Log into PayPal using either its app or website. ·         Click "Add Funds" in the Wallet section, and add money directly from your bank to your PayPal account. ·         If you have linked your bank account with PayPal, select it under Funding options to select it as your funding option. ·         Enter the amount you would like to transfer to PayPal from your bank balance. ·         Click Add Funds. It typically takes several days for funds to arrive on your PayPal account.   FAQ How can I send money PayPal? Log into your PayPal account, select "Send and Request," enter in your recipient's phone number or email address, select the amount due, payment method of choice and click on "Send Now" - quickly and safely sending money via PayPal is now an efficient method of money transfers!   How do I transfer money to PayPal from a bank? Log into PayPal and select "Add Funds" to transfer money from your bank to PayPal. Select your account number, input an amount, and confirm it. Though the transfer may take up to several days for completion.   How do you send money to someone on PayPal? Simply log into your PayPal account, select "Send and Request", enter the recipient's phone number or email address, select the amount to send, and click "Send Now".   How can I receive payment through PayPal? Senders can easily accept payments with PayPal by providing your PayPal email address and being notified via email when a payment has been completed. When funds appear in your PayPal account, they will appear instantly!
    • At least yours have parkour down pat. One of mine will still trip over his own shadow and fall over... He's a special type of cat... Ha ha ha
    • The question then becomes - was there any fluid coming from that hole before you did the rebuild ?    You may not have noticed, of course.   Depending on how you did the rebuild, the possibility has to be considered that somehow (cleaning ?)  fluid entered that hole and is now being 'forced'  out by small movements of the proportioning valve.   From the factory, there's actually a small rubber plug in that hole but with age and under-bonnet heat it's quite common for it to 'go missing'.  That rubber plug is designed to allow the venting process but also to prevent 'stuff' getting to the area (prevent corrosion, etc).   The plug is also not available as a spare part AFAIA. Personally I wouldn't race and buy a new master just yet but keep an eye on the area to see if the 'leak' continues.   If you're concerned about brake fluid damaging nearby paintwork, cable tie a piece of suitable absorbant material over the hole and remove/monitor occasionally.    Operation of the proportioning valve and the brake master itself won't be affected, but also keep an eye on brake fluid level, of course. In terms of a new master, the genuine part is getting expensive, unfortunately.  Amayama is showing AUD900+.   I was searching recently and there's an aftermarket part available from Japan made by 'Parts Assist': https://zenmarket.jp/en/yahoo.aspx?q=BNR32%2bBM50&p=1 Whether it's any good I have no idea, although in my experience Japanese aftermarket stuff is pretty good quality-wise.   The above site allows overseas buyers to purchase stuff more easily from Japan but there are fees and shipping costs, of course.   The original Japanese seller page is here: https://auctions.yahoo.co.jp/jp/auction/p1197401228 Copper/Nickel is fine but I still prefer bundy tube and it's also cheaper.
    • Your chihuahuas look weird!
×
×
  • Create New...