Jump to content
SAU Community

Recommended Posts

On September 24 a driver in a silver or grey FD Honda Civic (or some other Honda sedan) decided it'd be a good idea to speed through a red light.

I couldn't stop in time and we collided :( . The guy in the Civic then left the scene :mad:

Thought I'd share the damage while I sit here waiting for the bad news that my baby is written off.

Out of interest, what do you guys think? Definitely a write off?

 

Also, just in case, if anyone has seen a smashed up civic in the Cabramatta area in the last week - any info would be appreciated.

1.jpg

2.jpg

3.jpg

4.jpg

5.jpg

Edited by Wight
Link to comment
https://www.sau.com.au/forums/topic/467070-it-might-be-bye-bye-to-my-34/
Share on other sites

Damn that's rough mate, write off for sure!! 

I had Troy from iron chef try to source me another clean bayside GTT for around 6 months with very little luck before I called it quits, hopefully you can find another one!

sorry to hear
Exact same thing happened to my mate's super clean r33 gtst too in 2005 when the r33s were going for around 20k still, except it was hit by a kingswood and the kingswood fled the scene.
Police wasn't much help back then.
It's a shit thing to go through and I definitely know how you feel

I'm considering buying the car back, getting a front cut (without the engine) and repairing it that way. Hopefully engineless front cuts aren't too expensive.

That is, of course,  it isn't a statutory write off - which I doubt.

 

Unfortunately the police haven't done much now either. Because of where it happened there is just no footage. They did at least check the servo nearby,  which was nice.

Essentially you need to ask the insurance company for the salvage value of the car. This is what you need to pay them.to keep your wreck. If you choose to keep it then they pay you out the insured value less your excess less salvage, then you.need to goto the rms to get a form to fill out to apply for the right to repair it. Then have the repairs sign off saying it's done properly. Then get a blueslip. Then take the rms permission, the repairers sign off and all recipes to the rms to get it registered again.
However there is still a small loop hole. The wovr will ignore most 15 year old or older cars and not record them as write offs. So that may or maynot happen

  • Like 1

I was aware about the salvage value. But wasn't aware of the specifics regarding the RMS. Thanks heaps for the info - I'll look further into it.

I love this car, so will definitely be trying everything to get it back on the road, unless the cost is exorbitant.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Not really, but the heater box is pretty simple mechanically....if the door is one way the air bypasses the heater core and if it is the other way it goes through it for warm air.  If you are sure the actuator you moved manually is for the heater mix (there would also be one for output air direction) then I'd take the heater box out and see what is happening (you'll have to regass and re-coolant the systems afterwards) BTW pp724 onwards from the GTR workshop manual cover the system in good detail, it is probably worth checking. I think the IAT sensor might be a problem electrically for getting cold (if you got 24 error code not -24 it thinks the incoming air is -50c) and it covers how to test the sensor (although most likely it is either not plugged in or a wire is damaged)
    • Use the GKTech subframe bush and bring your subframe 10mm closer to the chassis. You'll need to fix an exhaust hanger to suit. One of the best mods I've done.
    • You'd really have to pull it apart further to know, it least you can be confident that the one heading to the back is not connected any more. There was once a ground on the shifter seal mount too, your head unit issue could be that simple
    • Perfect, I'll get to it this winter then at the same time as I weld on my anti squat kit. 
    • Alright so my 32 only has one temperature no matter what degree you set it to. I’ve tried disconnecting the servo motor arm and moving it either direction and got no change. I’ve fixed the leak in my AC and re charged it and with it on and clutch engaged it still blows hot even though the low pressure pipe going to the firewall is ice cold. Both heater core hoses are hot while running as well. Diagnostic code showed 24 for intake air temperature sensor. Anybody got any ideas?
×
×
  • Create New...