Jump to content
SAU Community

Recommended Posts

lol I like the idea of an Evo, but it would be a chunk more spending for likely minimal gain over the current car. 

I think an MX5 warrants a closer look, in terms of light, NA, and capable, it seems to top the charts. 

In the meantime, as was suggested, I'll track the Silvia some more. 

Edited by ActionDan

They vary widely like any car with multiple models across multiple years and types of usage. 

The attraction there is that being lighter, and NA, the running costs (time and money) will be lower overall than another boosted tyre, fuel, and brake hungry beast.

I already have two of those :D  

 

 

Here's a cool open wheeler,,, just across the ditch, dry sumped and lots of fruit. Left shifter for your convenience.

 

http://www.trademe.co.nz/motors/specialist-cars/competition-cars/auction-1202180099.htm

 

Cheers

Neil.

  • Like 1
  • 5 weeks later...
On 15/11/2016 at 8:52 PM, V28VX37 said:

...

I've been entertaining the idea of offloading the 34 though it's way too far gone in terms of time and cost over the past five years. It's the only car and keeping the balance between family friendly (=safe) and track friendly (=quick/reliable) is tough - I've just about tipped it over the edge with the 1.5-way. Sounds like DJBarnstar is familiar with that story :)

Anyway if you replaced it with a 2-car combo you could optimistically do a ~10k family diesel wagon (how exciting) and a ~10k track toy, but you don't get much for that money. MX5's are very appealing but a sorted turbo example wouldn't fit the budget. Though heaps lighter it'd be hard to go NA for the lack of power (at least on paper) but that said ditching the turbo would also mean reliability & heaps less ongoing cost.

...

I've been investigating the MX5 option a bit more just out of curiosity, window shopping is fun. There's heaps for sale on CarSales and mx5cartalk, and a few more track focused ones on my105 and TrackSales.

If I had the space for a trailer a well sorted racer (even non-turbo) would be sensible but since I don't it really would need to be registered. This would leave a couple of options:

  1. Club rego: Find an existing early NA project with mostly NB S1/S2 parts and other required track upgrades; ideally a turbo conversion too ;) There are a few around but many interstate, and getting them regoed in Vic is probably an engineering job = $$$
  2. Full rego: Find an NB (turbo) or NC that is registered but with a track focused setup. Newer car = theoretically less hassles but more rego cost

So essentially it's the good old 'streetable race car' dilemma, with a bit of 'is old but highly modified better than newer but more stock' thrown in.

Besides the purchase price a primary factor would be ongoing cost. I'd really prefer something that is reliable and cheap to track (haha oxymoron) over something that is fast but in bits half the time (already have one of those). If there was a measure it would be lowest $ per lap say over a year. Essentially, how to get the cheapest seat time?  

Darn you Greg for making me think about this :huh:

An alternative which I don't think has been mentioned yet is something like a RX7 with a LSx engine, there have been a few conversions like that done so picking up a completed one is a possibility. But of course a decent one is going to cost a lot more than some of the other suggestions here. Thing is though you get a powerful, nice handling car that should be low maintenance, to each their own but running something like a MX5 would get boring real quick, there is no substitute for power and all the interesting challenges it brings to the track.

An alternative which I don't think has been mentioned yet is something like a RX7 with a LSx engine, there have been a few conversions like that done so picking up a completed one is a possibility. But of course a decent one is going to cost a lot more than some of the other suggestions here. Thing is though you get a powerful, nice handling car that should be low maintenance, to each their own but running something like a MX5 would get boring real quick, there is no substitute for power and all the interesting challenges it brings to the track.

Nice. I'd love an LS swap for easy reliable power but never seen one on the street - I'm guessing they're pretty tough to get engineered?

I stupidly suggested to my gf that a MX5 would be a perfect car for her to get a head start in, learn on, use, etc. 

Now I want one, with a small turbo albeit.

LS Swapped FD would be great, but if you want a ~1250-1350kg car with an easy to use 250-270kw then you start looking into options like, oh I dunno, a RX7.. or a jap turbo import made by Nissan...

I have this discussion with my housemate who got an E36 328i with plans to put a LS1 in.

 

  • Like 1

The OP is interested in NA options, he already has a turbo and the LS/RX7 conversion is popular because their rotor motor blows up regularly whereas a properly lubricated LS will go forever. The LS has other advantages too, low C of G, compact, parts availability, aftermarket support and relatively light in weight.

The OP is interested in NA options, he already has a turbo and the LS/RX7 conversion is popular because their rotor motor blows up regularly whereas a properly lubricated LS will go forever. The LS has other advantages too, low C of G, compact, parts availability, aftermarket support and relatively light in weight.

Sidetrack but the new owner is racing my old Monaro and it's onto its third or fourth LS now so they're not bulletproof either... Granted he's pushing close to 400rwkw naturally aspirated in a high G environment but still.
  • Like 1
58 minutes ago, 260DET said:

Lubrication. Other than abuse, pretty well every LS engine failure/premature wear situation can be traced back to inadequate lubrication.

Hundred percent. He's gone a dry sump setup now, hopefully less dramas in the future.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
    • You think its the AFM? I know its a common issues on R32s. I find it coincidental how this issue raised right after cleaning the fuel system. As everything except the fuel system was fine before. I tried running it with the IACV unplugged but did not notice a difference and still stalled. However, the RPM gauge is not in the cluster right now, so I will need to connect the laptop again and use Nistune to check the RPM. I will check this weekend.
×
×
  • Create New...