Jump to content
SAU Community

Recommended Posts

5 hours ago, Dose Pipe Sutututu said:

Subtle lol...

You used the word brilliant many times lololol

Wasn't me, but a close relation....

You'd be more interested in the car he replaced this with - an N55 335i AH3

Edited by GeeDog

On November 22nd 2018, I put an order for a GTX3576R Gen 2 supercore from Sparesbox.

Sparesbox then went all quiet for about 3 weeks, I then contacted them and they advise there will be a delay (thanks for telling me anything). Due to the lack of communication, they offered me a $35 voucher. Sure whatever, it's end of the year not like I'm going to work on my car anyhow lol

Fast forward a few weeks, Pxxx (trying to hide names) called me and she advised me GCG (their supplier) is unable to provide me the turbo bought, so the alternative was to bump me up to a GTX3582R Gen 2. A bit hesitant at first, I eventually agreed to go a tad bigger.

So, last week I received a package on Friday, excited I opened it and look what arrived ?‍♂️20190113_112207.thumb.jpg.06d94d86fd246bbb9bbc2a8723a2b1ce.jpg

So yeah, I got what I wanted nearly 2 months ago, but... I've ordered a 0.83 housing because I thought I was getting a GTX3582R Gen 2 not a GTX3576R Gen 2. If I was definitely getting a GTX3576R Gen 2, it would be a 1.01 housing not a baby 0.83.

So f you Sparesbox.

 

  • Like 1

Well... You said you wanted more response for skid pans. Maybe they heard you and this is they're way of helping you out.

 

When are skid vids of gtx3576 gen2 goodness scheduled?

 

 

13 minutes ago, Dose Pipe Sutututu said:

On November 22nd 2018, I put an order for a GTX3576R Gen 2 supercore from Sparesbox.

Sparesbox then went all quiet for about 3 weeks, I then contacted them and they advise there will be a delay (thanks for telling me anything). Due to the lack of communication, they offered me a $35 voucher. Sure whatever, it's end of the year not like I'm going to work on my car anyhow lol 

Fast forward a few weeks, Pxxx (trying to hide names) called me and she advised me GCG (their supplier) is unable to provide me the turbo bought, so the alternative was to bump me up to a GTX3582R Gen 2. A bit hesitant at first, I eventually agreed to go a tad bigger.

So, last week I received a package on Friday, excited I opened it and look what arrived ?‍♂️20190113_112207.thumb.jpg.06d94d86fd246bbb9bbc2a8723a2b1ce.jpg

So yeah, I got what I wanted nearly 2 months ago, but... I've ordered a 0.83 housing because I thought I was getting a GTX3582R Gen 2 not a GTX3576R Gen 2. If I was definitely getting a GTX3576R Gen 2, it would be a 1.01 housing not a baby 0.83.

So f you Sparesbox.

 

Moar raspanse, No Ragrats.

Keep the .83!

27 minutes ago, admS15 said:

Well... You said you wanted more response for skid pans. Maybe they heard you and this is they're way of helping you out.

 

When are skid vids of gtx3576 gen2 goodness scheduled?

After Spool Imports decide to actually identify the gears I installed are theirs. The idiot sales guy said the gears I put in aren't Spool Import gears ?‍♂️

f**ken hell brah. This is why i don't want to let the Nissan out.

Sales guy needs a kick in the arse.


After Spool Imports decide to actually identify the gears I installed are theirs. The idiot sales guy said the gears I put in aren't Spool Import gears [emoji2357]


Sent from my A1601 using SAU Community mobile app

20 minutes ago, r32-25t said:

Was your reply, “then whose gears did you sell me?”

Nope, sent a photo of the gears from new.

No response today... sigh, should have bought a M4.

I waited almost 6 months for sparesbox to supply my EFR6758 and it was an absolute f**k around. I only paid $1900 for it. Ended up cancelling because they told me it would be a 9 month wait from that point (at the end of the 6 months). Cancelled the order and they refunded the money with no voucher or anything.

Purchased 6758 the next day for ~$2800

Sparesbox ring me the week later saying they just got their order in. I said ill take it still because it was so cheap. They don't agree to the $1900 that i was supposed to pay (was purchased during a sale) and want to charge me $3k

f**k sparesbox

40 minutes ago, iruvyouskyrine said:

I waited almost 6 months for sparesbox to supply my EFR6758 and it was an absolute f**k around. I only paid $1900 for it. Ended up cancelling because they told me it would be a 9 month wait from that point (at the end of the 6 months). Cancelled the order and they refunded the money with no voucher or anything.

Purchased 6758 the next day for ~$2800

Sparesbox ring me the week later saying they just got their order in. I said ill take it still because it was so cheap. They don't agree to the $1900 that i was supposed to pay (was purchased during a sale) and want to charge me $3k

f**k sparesbox

that's f**ked, and so obvious that they were doing everything they can to get out of honoring that sale price. I'd be reporting that shit to the ACCC

Guess I'm the odd man out.

I've only had good dealings with SparesBox.

However, I've only been buying basic service and repair items - with the exception of a billet girdle which they had a killer price on and shipped in good time.

21 minutes ago, GTofuS-T said:

that's f**ked, and so obvious that they were doing everything they can to get out of honoring that sale price. I'd be reporting that shit to the ACCC

ehhh my CBF factor is maximum. Was like 1.5 years ago now anyway.

49 minutes ago, ActionDan said:

Can they swap the rear housing for you? 

Ordered it through someone else, worked out cheaper.

Trying to see if I can exchange 

So.. some updates, returned the 0.83 for a credit note and will be using that towards a turbo drain, lines/fitting kit, etc.

Also ordered the 2nd revision of Spool Import gears, hopefully it doesn't need to come out again. 

Lastly, come to an agreement with Sparesbox, they're doing their best to rectify the poor experience and making it up to be by shopping a rear housing at a reduced cost.

Guess that worked out ok, just in time for CNY.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
    • Well the articals keep saying a Q50s (Skyline in Japan) with a new Manual gearbox. I like the talk about the new looks with the round tail lights. I hope they bring back the retro look like they did with the Z
×
×
  • Create New...