Jump to content
SAU Community

Recommended Posts

Shit Box Specs:

  • Garrett GTX3576R Gen 2, divided 1.01
  • Tomei 260/9.15mm Poocams
  • Sinco Twinscroll manifold, single gate (pulses split all the way to the gate)
  • Turbosmart Gen V 50mm Gate
  • 3.5" TBE with 5" 100 cell cat, mid muffler and rear muffler
    • Gate plumbed in after cat
  • Built blah blah.

 

I think the power range I guess will be fine then? 

Or should I bump the range to 440rwkw to be safe? 

Close to 600rwhp seems about right? 

Edited by ActionDan
1 hour ago, Dose Pipe Sutututu said:

Shit Box Specs:

  • Garrett GTX3576R Gen 2, divided 1.01
  • Tomei 260/9.15mm Poocams
  • Sinco Twinscroll manifold, single gate (pulses split all the way to the gate)
  • Turbosmart Gen V 50mm Gate
  • 3.5" TBE with 5" 100 cell cat, mid muffler and rear muffler
    • Gate plumbed in after cat
  • Built blah blah.

 

Are you going to fully send it ? What kind of Dyno?  And fuel system big enough to support full send (thinking 1300cc injectors?)

Edited by Lithium

@LithiumMainline roller dyno, will be using 255 semi slicks too LOL.. don't have any other tyres/wheels to use.

Fuel system will be good :)

  • Bosch 1480cc (aka 1500 or 1550 or 1650cc depending who you talk to)
  • 2x Walbro 460L in surge
  • 1x DW200 in tank (lift)
  • 8AN from surge to rail
  • OEM feed & return as return

Not too sure about full send, however let's see. A bit scared the gearbox will go bang instead lol.

  • Like 1
1 minute ago, admS15 said:

452kw and an exploded gearbox within 2 hours of finished dyno session.

LOL as I was typing the above response about gearbox going ka-blam lol

1 minute ago, Dose Pipe Sutututu said:

LOL as I was typing the above response about gearbox going ka-blam lol

Just stay out of 3rd gear, she'll be right. Otherwise, i have a brand spanking new in box r34gtt gearbox sitting in my shed that may or may not be for sale. Actually, i better hold onto it.

1 minute ago, Dose Pipe Sutututu said:

@LithiumMainline roller dyno, will be using 255 semi slicks too LOL.. don't have any other tyres/wheels to use.

Fuel system will be good :)

  • Bosch 1480cc (aka 1500 or 1550 or 1650cc depending who you talk to)
  • 2x Walbro 460L in surge
  • 1x DW200 in tank (lift)
  • 8AN from surge to rail
  • OEM feed & return as return

Not too sure about full send, however let's see. A bit scared the gearbox will go bang instead lol.

That should be a very solid setup all around if it all cooperates and you aren't shy.   I'll go with 452kw but more or less wouldn't shock me 

@admS15 will need to, will find a pair before the dyno day.

@Lithium kind of pulling my finger out because I have a track day to attend (gift from the S15 owner I tuned recently).

1 minute ago, ActionDan said:

Just saw your fuel system, downgraded power now because using pleb brands.

I know, at least 50kW less now because not ID injectors and mechanical pump.

On 5/30/2020 at 4:13 PM, Dose Pipe Sutututu said:

Why not, celebrate driving the R33? Great excuse to open it.

20200530_160734.thumb.jpg.c65a957f1c1f4afc476ca298261a898e.jpg

We are coffee pals. I have the same machine (well actually the cheaper one without an LCD). 
Mine has been going strong for 5 years. It's been through three offices and now makes my morning coffee without fail.

Literally the greatest little coffee machine i could have asked for. I trust yours is going just as strong?

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Was that with the cas upside or correct way up?
    • Did and sync timing with light 
    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
×
×
  • Create New...