Jump to content
SAU Community

Recommended Posts

I'm hopeful of a new Silvia/something similar. 

With he success of the 86, Toyota's willingness to allow another Supra to be released, even if it is a BMW, and the ever increasing interest in old Nissan's, I'm hoping Nissan does "something" in the RWD 4cyl space. to compliment the 400z. 

 

  • Like 1

I just bought 20 used Tigo optimisers for $16.25ea delivered, see how that goes with the shading on my off grid system. The on-grid system will benefit from a tree removal when it's dry enough for me to get the 4wd in there safely to assist.

I'm getting slammed by shade all round. 

 

  • Like 1

Nice man, hope that helps!

I really liked the idea of microinverters but reality is, I have no need for them as my roof is flat and there's no shading at all!

This solar shit is pretty interesting ay? more fun than playing with broken Nissans.

Dollar vs gain for microinverters is still a ways off IMO. Especially when you can get decent strong inverters so cheap, ew or used. Takes a very specific install to warrant them. 

I wouldn't have bought these optimisers either if they weren't cheap AF. 


 

  • Like 1
On 06/07/2021 at 9:08 AM, ActionDan said:

Boohoo... 

My graph stops at the apex, and just drops away to almost zero as the shade hits 1 single panel on my old grid system with a single tracker... 

hopefully the optimisers do something, if not time to look on aliexpress for micro inverters haha

Microinverters won't get me anything extra above optimisers in my setup. This is retro fit, I already have inverters in place, I don't need to convert to AC at the panel. I just have shade issues in winter. 

Optimisers will help that on the off grid system, cutting down the stupid tree above the grid system will sort that one lol 

At the moment, if nothing else, I am off peak all the time as I can fill the battery overnight. 

 

 

On 7/6/2021 at 9:50 AM, ActionDan said:

cutting down the stupid tree above the grid system will sort that one lol 

I have spent >10 years cursing the massive eucalypt that shades my array in the afternoon, but it would be a seriously f**ked up world where tress get cut down to increase yield on a solar array. No?

Mine is a 4mt tall scrubby wattyl piece of shit right on the embankment above the shed, it can go. That's all that's shading my on grid system, but it's a single tracker so on an old Kaco so 1 panel is enough to gut the output to 10%. 

The big euc's that shade the off grid array at various times, and our pool (filling it with leaves and seed pods constantly!) stay lol 

 

On 06/07/2021 at 11:19 AM, GTSBoy said:

but it would be a seriously f**ked up world where tress get cut down to increase yield on a solar array. No?

I don't see any issue, if that means less fossil fuels are burnt and factoring in transmission losses, etc. even more unnecessary fossil fuels are burnt & CO2 is released. Council would argue otherwise though, if we were powered by nuclear then yes cutting down 1x tree is bad, but we are burning rocks.

 

On 06/07/2021 at 11:32 AM, ActionDan said:

The big euc's that shade the off grid array at various times, and our pool (filling it with leaves and seed pods constantly!) stay lol 

Fire wood lol

Chopping established trees is about more than the carbon balance. This one tree feeds an enormous number of rainbow lorikeets, rosellas, and lots of other birds that eat the blossom or live off the insects. Recently the flying foxes are eating there too. The possums that live there are semi-welcome, if they learn to stay out of the roof!

Habitat loss in the suburbs is a terrible thing. I'm lucky. I live in what amounts to parkland - there's thousands of such trees around me. And I still wouldn't cut that tree down to improve my solar yield. In other suburban areas, such as the sprawling urban wastelands of Sydney and Melbourne, every large tree should be considered sacred. They are the last shreds of the ecosystems that used to cover the whole area and are tiny little islands of life in a concrete and bitumen wasteland.

On top of that, I would rather have that tree for the shade that it casts on the house, which makes the place more pleasant on hot summer days. I'd hate to have bare brick walls (and the parts of the roof not covered in panels) facing the NW sun. I shudder every time I see those horrendous 2 storey McMansions with no eaves and massive walls facing W and N (or worse, massive windows facing W and N!).

 

  • Like 2
On 06/07/2021 at 12:18 PM, GTSBoy said:

Chopping established trees is about more than the carbon balance. This one tree feeds an enormous number of rainbow lorikeets, rosellas, and lots of other birds that eat the blossom or live off the insects. Recently the flying foxes are eating there too. The possums that live there are semi-welcome, if they learn to stay out of the roof!

if you put it that way probably not, how about a slight haircut?

  • Like 1

Agreed, the big trees around the house are essential the wildlife here, I moved out of town to be closer to nature among other things. 

But that Wattyl... can eat a dick. 

On 7/6/2021 at 11:50 AM, Dose Pipe Sutututu said:

how about a slight haircut?

Acceptable.

On 7/6/2021 at 12:43 PM, ActionDan said:

But that Wattyl... can eat a dick.

I'm actually with you there. f**king Acacias. They only live 10 years then they sucker all over the bloody place anyway. Take it down knowing full well that it won't take long to replace it with something else.

They were completely surrounding my water tanks up the hill, if there was a fire we'd have no water 0_0

Had fun clearing those. 

I discovered the limb dropping is due to birds eating grubs from out of the wood. 

 

On 7/5/2021 at 9:40 AM, DaymoR32 said:

would be great if there was a newer nissan you could buy the bits from. i need the whole AC assembly apart from the bit under the dash essentially. im looking at a fortune if i want AC back in my car (which i do)

yup, been piecing my a/c componentry together for a couple of years and only half mine was missing...

...All because the owner before me decided to cut lines pulling the motor instead of disconnecting 🙄

  • Like 2
On 06/07/2021 at 3:28 PM, mr_rbman said:

..All because the owner before me decided to cut lines pulling the motor instead of disconnecting 🙄

this reminds me of my old 180SX, sold it to a chic, who then sold it back to a friend of mine, who then decided to remove the A/C by just using tin snips on the condenser pipe work and the compressor pipework.

 

  • Haha 1

1634538948_Screenshot_20210707-205200_SEMSPortal.thumb.jpg.2160b9df6866dae72e0580f397287387.jpg

Tempted to angle my panels slightly up, this would theoretically increase my yield. However will the gains be worth more than the initial cost, even after 3 to 4 years? Probably not.

In other not so interesting news, rather boring. My block has been machined, cleaned and ready to go. Head has been skimmed, all the usual shit done to it and valve clearances being set for the brap sticks. This time being a RWD block, with an even larger sump I suspect we might not have any more oil supply and drainage issues.

You can DIY a tilt adjustment easily enough.

I have a big set of adjustable aluminium legs sitting in my shed doing nothing, kept them for the materials alone. 

I didn't need them as my roof pitch is bang on for my locale. 

Also these babies arrived. 

No description available.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Scenic roads, stunning skylines, and Chickos to finish it off! Join SAU NSW as we cruise through the Royal National Park and along Lawrence Hargrave Drive to Figtree! Sunday 26th October 2025 4:30PM Meeting Waterfall Station Parking 5:00PM Cruise Departure Royal National Park > Lawrence Hargrave Dr > Memorial Dr > Sid Parrish Park 6:15PM Arrival at Sid Parrish Park Figtree Meet Location: Waterfall Station Parking Final Destination: Sid Parrish Park RSVP: https://forms.gle/E4s5SiRKQfDdypky8 *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • It's funny, as Ive seen plenty of people use them in cheap builds on YT. And they actually go okay, even though a lot of other maxspeedingrods stuff is terrible. Those turbos seem reliable enough, the only part being, a good quality turbo that is "identical" to it, will out perform it day in and day out. In both a lower boost threshold, and the ability to flow more air at the same boost pressure. As a cheap cheap replacement, not a terrible choice. For cheap and shouldn't blow in a day, not terrible (like other eBay/Temu turbos) for low cost and still decent performance, that's where the question comes in to play from the results I've seen. I'd actually find it hilarious to buy one, and strap it to a paddock basher or some other cheap as POS originally NA car, and send it to the moon!
    • The maxpeedingrods turbo is cheap and bolts on to stock parts. I think you just need a bigger silicone coupler for the intake. Its a cheap china turbo, but it's been running on mine for almost 3 years at 16-19 psi.
    • What do they look like right after you've tried to start it with everything connected? Also post photos of what they actually look like.
    • Also wanted to say, my new spark plugs are blackened looks like it's very rich. I have splitfire coilpacks but stock coilpack loom and ignitor. I tried directly grounding the ignitor ground to body as well. 
×
×
  • Create New...