Jump to content
SAU Community

Recommended Posts

4 hours ago, r32-25t said:

Did you get the 230mm version? 
 

I’ve got the solid center version and it’s a dream to drive 

Yeah same as yours, however just sprung centre.

Trying to prolong the box going KAPOW as long as possible lol

  • Like 1
On 11/26/2024 at 10:18 PM, Dose Pipe Sutututu said:

Been needing a new clutch for a while, but holding off because of life tingz and adulting.

But... Being of Asian descent, I can't pass on a good sale, especially everyone else is selling it for $2k+ (JJR has it for $1799).

Screenshot_20241126-2209572.thumb.png.2e75bee160c45eca784e6aabba53e42b.png

Really on the fence on this one, because the unsprung version of this is $1281 via Shitbox (Sparesbox) and the sprung version is quite a bit more (no idea why Shitbox doesn't offer them).

Screenshot_20241126-231517.thumb.png.caa6908ea45b13172efb4637ff2d6b0d.png

Ending up just sending it and getting the twin sprung organic. Mainly because I wanted the car to be nice to drive and didn't want to make it more of a shitbox than it already is.

 

 

I used to daily mine with a 6 puck button clutch. It drove (to me) like a factory clutch. Roll it off the mark all like normal, no jerking, no bucking.

Hilariously no one else could drive it without dialling up about 3,000rpm and chirping the tyres off the mark, or stalling it.

It's all about getting used to it.

  • Like 1
1 hour ago, MBS206 said:

I used to daily mine with a 6 puck button clutch. It drove (to me) like a factory clutch. Roll it off the mark all like normal, no jerking, no bucking.

Hilariously no one else could drive it without dialling up about 3,000rpm and chirping the tyres off the mark, or stalling it.

It's all about getting used to it.

Haha yep, everyone stalls mine. Even catches me off guard when I'm trying to reverse up my driveway into the driveway with a decline.

Hoping the twin plate sprung organic is a bit more forgiving for my old and tired body/legs/pelvis.

  • Like 1

Fark this... mental health day it is tomorrow.

Booked Luddenham lol

Is the clutch fked? yep
Do I need to fix that in tank venturi? yep

Will I do any of the above? No

image.thumb.png.f57f0fd13af0e7c342f84450feac4e3f.png

  • Like 1
  • Haha 1
15 minutes ago, Dose Pipe Sutututu said:

Fark this... mental health day it is tomorrow.

Booked Luddenham lol

Is the clutch fked? yep
Do I need to fix that in tank venturi? yep

Will I do any of the above? No

image.thumb.png.f57f0fd13af0e7c342f84450feac4e3f.png

Yeah boiiiiiii

PB the karnt, then lost an IC clamp. Was also warned about go sideways 😂

He said he understands the track is hot and tyres let go in the heat.

Called it a day 4th session, came on the throttle on Lap 2 and lost boost. No idea where the passenger side IC Bluetoothed to, and it was getting quite hot so called it quits.

Waited for the other boys then we ended up at the pub for 3 hours lol.

My mate in the R33 shit box managed a 59s on his first track experience at Luddenham.

PXL_20241204_002306478.thumb.jpg.99a73ebbad0f0525a8a4b90a8a02dadc.jpg

PXL_20241203_234844370.thumb.jpg.7909c5a58613c0af2040fdbc9f59a2a4.jpg

PXL_20241203_230327669.thumb.jpg.b40c59f5213f52a43d7a34df78ed717a.jpg

PXL_20241203_220459127.thumb.jpg.4b9caad756cc4e1ec8ddf1e5ac5fce6c.jpg

  • Like 7
6 hours ago, Milkmun said:

How much work to get you in the 55s? Or just more seat time?

I think just better tyres, I'm just on Hankook RS-4 tyres at the moment, which aren't really meant for the track.

Also, been mucking around with my suspension for sometime now and I'm really happy bow neutral it is. Car doesn't want to just oversteer or understeer like it did years ago. 

Time to put on proper tyres one day and see what the shit box can do at SMSP, One Raceway and Luddenham again.

  • Like 1

Yeah, you'll never get a reasonable time without spending on tyres, they ware worth more than all the other mods put together for lap times.

How's the garmin going? It is difficult to get data logging into the new car (because must retain standard ECU for tuning which can't do lap logging so need separate systems nekmennit), was thinking about using one of those in the meantime

2 hours ago, Duncan said:

How's the garmin going?

It's great, fantastic bit of kit for the novice like me.

One thing it doesn't do, as @No Crust Racing pointed out before, is capture CANbus data. Would be great to get additional data from the car to overlay.

I'll download the video from my 56s for a laugh soon.

  • Like 1

yeah basic OBD data would be nice, and cheap electronically to add, might be coming in future.

unfortunately in nissan at least, only a small subset is on the OBD can and all the interesting stuff like boost or oil pressure is on a proprietary CAN

  • Like 1
3 hours ago, Duncan said:

yeah basic OBD data would be nice, and cheap electronically to add, might be coming in future.

unfortunately in nissan at least, only a small subset is on the OBD can and all the interesting stuff like boost or oil pressure is on a proprietary CAN

It's easy to tap to the other CAN networks, and in addition, most of the stuff you'd want could be obtained by querying the data over UDS on the network available on the OBD2 port. That said, it's much nicer to just listen on the appropriate network to data that's being streamed rather than querying in steps using OBD2 or UDS.

10 hours ago, niZmO_Man said:

what are you going to get?

I think depending how much left over cash I have after all the kids and wife (daycare, extra curriculum activities, toys, and whatever they drain from my account, wife's spending, etc.) I might go for the Advan A052 OR if the bank account says no, then Nankang CR-S.

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Lamb roast on Saturday will be different 🥲
    • They are under bucket shims. Tomei provides a test shim kit and then any measurement of shim required. 
    • I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
×
×
  • Create New...