Jump to content
SAU Community

Recommended Posts

4 hours ago, r32-25t said:

Did you get the 230mm version? 
 

I’ve got the solid center version and it’s a dream to drive 

Yeah same as yours, however just sprung centre.

Trying to prolong the box going KAPOW as long as possible lol

  • Like 1
On 11/26/2024 at 10:18 PM, Dose Pipe Sutututu said:

Been needing a new clutch for a while, but holding off because of life tingz and adulting.

But... Being of Asian descent, I can't pass on a good sale, especially everyone else is selling it for $2k+ (JJR has it for $1799).

Screenshot_20241126-2209572.thumb.png.2e75bee160c45eca784e6aabba53e42b.png

Really on the fence on this one, because the unsprung version of this is $1281 via Shitbox (Sparesbox) and the sprung version is quite a bit more (no idea why Shitbox doesn't offer them).

Screenshot_20241126-231517.thumb.png.caa6908ea45b13172efb4637ff2d6b0d.png

Ending up just sending it and getting the twin sprung organic. Mainly because I wanted the car to be nice to drive and didn't want to make it more of a shitbox than it already is.

 

 

I used to daily mine with a 6 puck button clutch. It drove (to me) like a factory clutch. Roll it off the mark all like normal, no jerking, no bucking.

Hilariously no one else could drive it without dialling up about 3,000rpm and chirping the tyres off the mark, or stalling it.

It's all about getting used to it.

  • Like 1
1 hour ago, MBS206 said:

I used to daily mine with a 6 puck button clutch. It drove (to me) like a factory clutch. Roll it off the mark all like normal, no jerking, no bucking.

Hilariously no one else could drive it without dialling up about 3,000rpm and chirping the tyres off the mark, or stalling it.

It's all about getting used to it.

Haha yep, everyone stalls mine. Even catches me off guard when I'm trying to reverse up my driveway into the driveway with a decline.

Hoping the twin plate sprung organic is a bit more forgiving for my old and tired body/legs/pelvis.

  • Like 1

Fark this... mental health day it is tomorrow.

Booked Luddenham lol

Is the clutch fked? yep
Do I need to fix that in tank venturi? yep

Will I do any of the above? No

image.thumb.png.f57f0fd13af0e7c342f84450feac4e3f.png

  • Like 1
  • Haha 1
15 minutes ago, Dose Pipe Sutututu said:

Fark this... mental health day it is tomorrow.

Booked Luddenham lol

Is the clutch fked? yep
Do I need to fix that in tank venturi? yep

Will I do any of the above? No

image.thumb.png.f57f0fd13af0e7c342f84450feac4e3f.png

Yeah boiiiiiii

PB the karnt, then lost an IC clamp. Was also warned about go sideways 😂

He said he understands the track is hot and tyres let go in the heat.

Called it a day 4th session, came on the throttle on Lap 2 and lost boost. No idea where the passenger side IC Bluetoothed to, and it was getting quite hot so called it quits.

Waited for the other boys then we ended up at the pub for 3 hours lol.

My mate in the R33 shit box managed a 59s on his first track experience at Luddenham.

PXL_20241204_002306478.thumb.jpg.99a73ebbad0f0525a8a4b90a8a02dadc.jpg

PXL_20241203_234844370.thumb.jpg.7909c5a58613c0af2040fdbc9f59a2a4.jpg

PXL_20241203_230327669.thumb.jpg.b40c59f5213f52a43d7a34df78ed717a.jpg

PXL_20241203_220459127.thumb.jpg.4b9caad756cc4e1ec8ddf1e5ac5fce6c.jpg

  • Like 7
6 hours ago, Milkmun said:

How much work to get you in the 55s? Or just more seat time?

I think just better tyres, I'm just on Hankook RS-4 tyres at the moment, which aren't really meant for the track.

Also, been mucking around with my suspension for sometime now and I'm really happy bow neutral it is. Car doesn't want to just oversteer or understeer like it did years ago. 

Time to put on proper tyres one day and see what the shit box can do at SMSP, One Raceway and Luddenham again.

  • Like 1

Yeah, you'll never get a reasonable time without spending on tyres, they ware worth more than all the other mods put together for lap times.

How's the garmin going? It is difficult to get data logging into the new car (because must retain standard ECU for tuning which can't do lap logging so need separate systems nekmennit), was thinking about using one of those in the meantime

2 hours ago, Duncan said:

How's the garmin going?

It's great, fantastic bit of kit for the novice like me.

One thing it doesn't do, as @No Crust Racing pointed out before, is capture CANbus data. Would be great to get additional data from the car to overlay.

I'll download the video from my 56s for a laugh soon.

  • Like 1

yeah basic OBD data would be nice, and cheap electronically to add, might be coming in future.

unfortunately in nissan at least, only a small subset is on the OBD can and all the interesting stuff like boost or oil pressure is on a proprietary CAN

  • Like 1
3 hours ago, Duncan said:

yeah basic OBD data would be nice, and cheap electronically to add, might be coming in future.

unfortunately in nissan at least, only a small subset is on the OBD can and all the interesting stuff like boost or oil pressure is on a proprietary CAN

It's easy to tap to the other CAN networks, and in addition, most of the stuff you'd want could be obtained by querying the data over UDS on the network available on the OBD2 port. That said, it's much nicer to just listen on the appropriate network to data that's being streamed rather than querying in steps using OBD2 or UDS.

10 hours ago, niZmO_Man said:

what are you going to get?

I think depending how much left over cash I have after all the kids and wife (daycare, extra curriculum activities, toys, and whatever they drain from my account, wife's spending, etc.) I might go for the Advan A052 OR if the bank account says no, then Nankang CR-S.

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
    • Well the articals keep saying a Q50s (Skyline in Japan) with a new Manual gearbox. I like the talk about the new looks with the round tail lights. I hope they bring back the retro look like they did with the Z
×
×
  • Create New...