Jump to content
SAU Community

Recommended Posts

Advan ad08r great dry performance. Better than you would expect given the amount of tread they have wet weather performance.

In the same category as the re003 is also the hankook rs3

I have the 595 rsrr at the moment, but they have some incredible road noise, good grip and cheap, but you don't want to be cruising down highways/motorways on them.

I run a 255/40/r18 ad08r on the front and a 315/30/r18 Nt01 on the rear. Probably the most expensive combination you could get hahaha but I can't fault the setup.
I have a partially stripped out s13 widebody with a 460whp rb25 with full rollcage, solid bushes on everything, 15 body braces as well as big whiteline swaybars and obviously coilovers to top it all off...
so I'm super light and super stiff...
Traction has always been an issue but since running this setup for the last few months I couldn't be happier with how the car sticks to the road...

NT01 isn't really a street tyre, it is in fact barely legal as there's about 2mm of tread before it hits the indicator (well the 1st indicator). I run them on my car however it's 80% track 20% street use so I don't mind the useless wet weather grip and the crazy amounts of road noise.

For a decent set of street tyres I would look at Nitto's INVO range or Bridgestone RE003.

  • Like 1
  • 4 weeks later...
24 minutes ago, Hadouken said:

Where in aus can you get them?

Unfortunately you can't yet.. They came on my car from Japan.. I've emailed Bridgestone Australia and they said the tyre would become available to our market this year... Patiently waiting..

On ‎13‎/‎01‎/‎2017 at 9:20 PM, vxsr33 said:

I ended up getting rs3's all round in 235/45/17. Very happy with them, the grip and turn in response is amazing and i found them to be good in the wet too.

they are good hey. Have them on the front at the moment in the same size as you, and will do them on the rear too as soon as current tyres wear out.

For me to date though, the ultimate performance street tyre is still the RSRR. Just bloody awesome. Quick wearing but also relatively 'dirt cheap' on the performance scale. I imagine the ad08 might be better still but more $$, and not used them myself.

On ‎14‎/‎12‎/‎2016 at 2:53 PM, Anfanee said:

Apparently the new Michelin Pilot Sport 4's are brilliant. 

I also hear great things about these; only thing the tyre shop pointed out, is they're not made for' performance' driving, eg not made with large shoulder blocks...so apparently will be good but just wear fairly quickly if pushed.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • 310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
    • The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
    • Just like in being 14mm too small (296mm) makes it not fit, being 14mm too big (324mm) it also won't fit. You want to find the correct rotor.
    • @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
×
×
  • Create New...