Jump to content
SAU Community

R33 GTR LM Limited

Steve85

By Steve85,
in Introduce yourself

 Share

Recommended Posts

Steve85 Mentor

Steve85

Posted
Posted

R33 GTR LM Limited

Hi all,

So long time stalker and awkward question guy here. I have been chasing an R33 GTR LM Limited for a long time. 

I have seen all the LM Limiteds that have been for sale this year. In total, there were less than ten cars for sale here and in Japan.

In the end, I have purchased an LM Limited from Perth from a nice guy called Gavin. He contacted me early in my search to offer his car to me. At the time, I was looking for a stock car that had a few modifications as possible. Gav's car did not fit that bill. It has been built from the ground up in all aspects (engine, suspension, brakes, etc).

The months rolled on and I followed up every lead I could to try to find the car I wanted. I spent hours and hours trawling through the internet, facebook and of course SAU. All the while a little voice on my shoulder kept asking if maybe I should just buy that worked one that Gav offered. It was already here after all. 

Finally, I cracked, I gave up my search got back in contact with Gav to offer to buy his car. His response: "I'm going to hold onto it and not sell it." I was devastated and proceeded to offer the amount that I knew Gav wanted for it. He changed his mind after a couple of weeks and I sent a healthy deposit over to secure the car. 

The car had a few minor issues that needed to be worked out at Galvsport. While it was there I asked that the car be inspected with the intent of me purchasing it. The guys at Galvsport were fantastic and were very patient with my questions and commentary. In the end, I did buy the car and transfered the rest of the money to Gav. I know owned the car I wanted.

If only it wasn't 3500km away. I had the car shipped over using CEVA on the premium race car transport. The car arrived in excellent condition and was exactly what I was hoping for. It was shipped from Galvsport directly to Racepace in Melbourne who have gotten the car into a roadworthy state (VicRoads are notoriously scrupulous on modified cars). 

I picked the car up with its roadworthy today and drove it away. I did stall it once trying to complete a u-turn and it has insanely hard suspension. I was advised that I should soften it up and having driven it for 30 minutes this is now a priority. Fortunately the car has adjustable damping which should result in a better ride.

So whats the car like? It's fast, really fast. Like oh my god, what just happened, fast!

It's also very loud. Not the exhaust, it is tolerable, but the noise from the suspension, fuel pumps and differentials is insane. Its got a radio so I might have to give that a go to remove the unwanted noise in the background.

So all in all, it's a very different car than I was expecting, this thing feels and acts like a racecar. Certainly once the suspension is softened up, I think it will be more tolerable on the roads. 

So, pictures, I know most of you are only here for pictures:

IMG_3485.JPG

IMG_3486.JPG

IMG_3487.JPG

IMG_3493.JPG

IMG_3494.JPG

  • Like 4
Link to comment
https://www.sau.com.au/forums/topic/468143-r33-gtr-lm-limited/
Share on other sites
Steve85 Mentor

Steve85

Posted
  • Author
Posted
Quote

OMG. So much yes. Beautiful car, you really scored.

Almost everyone who sees it says that. It's a testament to Gav and Galvsport for building and to myself for asking soooo many questions. I even queried people who had only seen the car once.

I attempted to leave no stone unturned in my quest and it is paying off. The roadworthy for this was less complicated than for my Ford Falcon and to me that suggests that my research has paid off. Big win!.

  • Like 1
Steve85 Mentor

Steve85

Posted
  • Author
Posted

Mod list is extensive, here is a google doc with the details:

https://docs.google.com/document/d/1TyxCj2NoIdTviEseLMahUZxGtzKSrCDqhgPiPNz1RJ8/edit?usp=sharing

But the short version is:

  • 2.8 Tomei stroker, with N1 block.
  • Tomei Oil Pump and an N1 water pump. 
  • JUN CAms and head equipment.
  • Nismo inlet manifold.
  • GTX2863R Turbos.
  • 3" Kakimoto Exhaust (has been damaged by E85)
  • Twin Walbro Fuel Pumps.

Plans:

2016: get it on the road. (Just need one more piece of paper and then this is done).

2017: Mechanicals. Specific items (development of a single LCD gauge set) Suspension tune. Remap engine if required.

2018: Body work, to be touched up, carbon wing blade to be sourced and installed (if not already completed). Full protective wrap.

2019; ???

Power: Currently

640hp at the wheeis @6000RPM.

818NM Torque at the wheels @5000RPM 

 

Steve85 Mentor

Steve85

Posted
  • Author
Posted

So i picked the car up from Racepace around 11 this morning, drove it to work where i parked it where i could see it directly in front of the building.

I carry on with my work showing the car off ans having a good time until late afternoon. One of the other engineers comes upstairs and doesnt even mention it. I ask him if we just not going to talk about it, at which point a conversation is struck up about the car.
We look out and i can see the drivers door is ajar. There's someone in my car i ran downstairs and chased the bloke off.
He jumps into an i30, and starts to drive away, i start taking pictures of the car. So he stops jumps out and threatens me with a knife saying "you wanna get fu**ing stabbed?" I reply "just get the fu** out of here". He drives off.
Police were great, they showed up within minutes, really good cops too. Super helpful and feel bad for me.

Gdaymate123 Enthusiast

Gdaymate123

Posted
Posted
5 minutes ago, Steve85 said:

So i picked the car up from Racepace around 11 this morning, drove it to work where i parked it where i could see it directly in front of the building.

I carry on with my work showing the car off ans having a good time until late afternoon. One of the other engineers comes upstairs and doesnt even mention it. I ask him if we just not going to talk about it, at which point a conversation is struck up about the car.
We look out and i can see the drivers door is ajar. There's someone in my car i ran downstairs and chased the bloke off.
He jumps into an i30, and starts to drive away, i start taking pictures of the car. So he stops jumps out and threatens me with a knife saying "you wanna get fu**ing stabbed?" I reply "just get the fu** out of here". He drives off.
Police were great, they showed up within minutes, really good cops too. Super helpful and feel bad for me.

thats f**ked 

  • Like 1
dyl33 Mentor

dyl33

Posted
Posted

That's terrible luck, dose the car already have an alarm? I hope so. If not wow 

hope alls sorted. But you can not leave a R33 LM limited with 2.8l stoker + all the other goodies on the street. If the right thief gets it, it's all gone. +1 for tracker of some sort.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Matt Z
      SAU NSW - Archies Flame Grille Meet & Cruise to Kurnell

      By Matt Z · Posted

      Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Ozdavroz
      WTAC 2025

      By Ozdavroz · Posted

      Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • bcozican
      WTAC 2025

      By bcozican · Posted

      i will be there 😁
    • patrickxdf12
      Squeaking clutch/throw out bearing

      By patrickxdf12 · Posted

      Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...