Jump to content
SAU Community

Recommended Posts

[SYD] Garage cleanout (seats, wheels, radiator, braided brake lines, turbo, ecu)

Hi All

Sold my R33 GTS-t now time to get rid of all the parts I still have.

Prices are firm but will discount if you buy multiple items.

Location is Gregory Hills (Oran Park / Narellan area).

email; [email protected]

PWR Radiator 55m R33 GTST/GTR - never installed, still in box. Will include brand new radiator hoses too. - $300

pwr5.jpg

pwr3.jpg

pwr1.jpg

pwr2.jpg

Autotechnica seats on autotechnica rails. rails are vehicle specific rials for R33 GTST - also fits some other cars R32, some s-chassis, etc. seats are in decent condition but could use a clean as have been sitting in storage for a number of years. price based off the value of the seat rails alone. - $150 - Sold pending payment.
 

seats1.jpg

seats2.jpg

seats3.jpg

Lenso staggered 17 inch wheels. fronts 17x8 rear 17x9. Clears the r33 brembo style brakes. Good condition, no gutter rash at all. $300

skylinewheel1.jpg

skylinewheel2.jpg

skylinewheel3.jpg

skylinewheel4.jpg

 

Edited by Jim985
update

As far as I am aware the Radiator should drop right in the same as the stock one. I never got around to even attempting it though so i can't speak from experience.

  • 2 weeks later...
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Before all the EFR fan boys come in, have a look at: https://www.garrettmotion.com/racing-and-performance/performance-catalog/turbo/g-series-ii-g30-825-58mm/ It also comes in a T4 1.06 divided housing. I would dare say if you want response & also decent power, this thing would chop.   AND apologies, just re-read your post, you've already bought the turbo... whatever you do, make sure you stick with divided housing and proper twin scroll manifold.
    • People have got to stop doing that. ShatGPT is not a search engine. It is a hallucination factory.   I also would recommend the 1.05. The .83 will "work" for you , in that it will be more responsive, but I think you'll find that it won't be anywhere near as good running it out to 8000rpm as the big housing will be.
    • Decided for the first time ever I would tow my car TO the track day on the same working theory as bringing tools and spares "if I have it I wont need it, but if I leave it behind i will 100% need it" all setup and ready to go out and try these A050 for the first time First session showed I needed to stiffen up the dampers a touch but still managed a few 1:21's without much effort. things were looking good. Came in a dropped the tyres down  to 26/28 as they had gotten to 35/33C from 22C cold The first lap of session two I managed to drop into 1:20's. Then in the second lap into the second session. Coming into T3 and I suddenly lost brake pedal followed by some huge rear end vibrations and scraping sounds. Got it back into the pits after session ended and found this. in the attached video, all of the wobble is in the hub its self, wheel is mint, and bearing feels tight. lKXLqpd - Imgur.mp4   Deciding it was a bent spindle I tried to find bearing/hub assembly locally but was unsuccessful so it was loaded back onto the trailer i luckily brought it on to drag it back home  
    • 1.05 you’ve gotta let it breath 
    • You have to continuously fill it to avoid dry running. Personally the transmissions I've serviced have never been bad enough to justify doing this because it is definitely a pretty complicated and somewhat risky procedure compared to simply draining the pan, measuring what came out, then refilling with the exact same amount.
×
×
  • Create New...