Jump to content
SAU Community

Recommended Posts

ATS Carbon Triple Plate Clutch to suit RB

Hi Guys,
 
I have an ATS carbon triple plate out of my BNR34 for sale. Will suit RB25/ RB26/ RB30. Funnily enough I thought it was a twin and wasn't going to handle the new setup but turns out it is indeed a triple and is rated to 1200hp. Unfortunately I had already bought a new clutch before opening it so I guess my loss is your gain.
 
It is a push type clutch and I was using it with a push/pull converter but I am keeping that for my new clutch. Push/pull converters are around 300-500 new if you need one.
 
I measured the discs at 3.7mm thick. They are 3.9mm thick new which means this thing is almost new and considering they are 4.5k or so new its a great price.
 
Clutch is located in Rouse Hill, NSW and given how heavy the thing is pickup is much preferred over post but will post at buyers expense.
 
Price 3100 ONO
 
Any questions just message me or sms/call 0403858714.
 
Thanks,
 
Brett

16935714_10154083372671895_1829040148_o.jpg

16935818_10154083372711895_1906250873_o.jpg

16990593_10154083372686895_1635636937_o.jpg

  • 2 weeks later...
Bump. These are expensive clutches but they drive like a stock clutch and wear very very slowly which means they last for ages. Quite rare for something that can easily hold 1000awhp.
 
ATS themselves say it takes no more effort to push the clutch in than a standard clutch
  • 2 weeks later...
  • 2 months later...

Really interested in the clutch but don't know enough about them I have a Stagea Genuine 260RS RB26DETT that will need a clutch soon but I don't know if I can get the one you have to fit.. if you have any info that might help confirm it will fit please let me know & we can talk $

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • HFM BM57 has a "bad" knee point, IIRC. It's not the same thing as the later R chassis MC.
    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
×
×
  • Create New...