Jump to content
SAU Community

ATS Carbon Triple Plate Clutch to suit RB

reaper
 Share

Recommended Posts

reaper Experienced

reaper

Posted
Posted

ATS Carbon Triple Plate Clutch to suit RB

Hi Guys,
 
I have an ATS carbon triple plate out of my BNR34 for sale. Will suit RB25/ RB26/ RB30. Funnily enough I thought it was a twin and wasn't going to handle the new setup but turns out it is indeed a triple and is rated to 1200hp. Unfortunately I had already bought a new clutch before opening it so I guess my loss is your gain.
 
It is a push type clutch and I was using it with a push/pull converter but I am keeping that for my new clutch. Push/pull converters are around 300-500 new if you need one.
 
I measured the discs at 3.7mm thick. They are 3.9mm thick new which means this thing is almost new and considering they are 4.5k or so new its a great price.
 
Clutch is located in Rouse Hill, NSW and given how heavy the thing is pickup is much preferred over post but will post at buyers expense.
 
Price 3100 ONO
 
Any questions just message me or sms/call 0403858714.
 
Thanks,
 
Brett

16935714_10154083372671895_1829040148_o.jpg

16935818_10154083372711895_1906250873_o.jpg

16990593_10154083372686895_1635636937_o.jpg

  • 2 weeks later...
reaper Experienced

reaper

Posted
  • Author
Posted
Bump. These are expensive clutches but they drive like a stock clutch and wear very very slowly which means they last for ages. Quite rare for something that can easily hold 1000awhp.
 
ATS themselves say it takes no more effort to push the clutch in than a standard clutch
  • 2 weeks later...
  • 2 months later...
TMLP Community Regular

TMLP

Posted
Posted

Really interested in the clutch but don't know enough about them I have a Stagea Genuine 260RS RB26DETT that will need a clutch soon but I don't know if I can get the one you have to fit.. if you have any info that might help confirm it will fit please let me know & we can talk $

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      WTB R34 GTR Guard Liners

      By Kinkstaah · Posted

      Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • itsmeyo
      WTB R34 GTR Guard Liners

      By itsmeyo · Posted

      Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • Kinkstaah
      From Japan and back to Europe, my sh*tbox R34 GTT

      By Kinkstaah · Posted

      You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
    • Dose Pipe Sutututu
      From Japan and back to Europe, my sh*tbox R34 GTT

      By Dose Pipe Sutututu · Posted

      LOL.... you are correct there.
×
×
  • Create New...